P0336 Code - Crankshaft Position Sensor 'A' Circuit Range/Performance
Quick Answer
The P0336 diagnostic trouble code (DTC) refers to the Crankshaft Position Sensor 'A' Circuit Range/Performance. Common causes include Faulty crankshaft position sensor, Damaged or corroded sensor wiring, Loose or poor connection between the sensor and ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0336 indicates Crankshaft Position Sensor 'A' Circuit Range/Performance.
- Common causes
- Common causes include Faulty crankshaft position sensor, Damaged or corroded sensor wiring, Loose or poor connection between the sensor and ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0336 Description
The P0336 diagnostic trouble code (DTC) refers to the Crankshaft Position Sensor 'A' Circuit Range/Performance. The crankshaft position sensor is a crucial component in the vehicle's engine management system, as it helps monitor the position and speed of the crankshaft. This information is essential for the engine control module (ECM) to accurately time the ignition and fuel injection, ensuring optimal engine performance. When the ECM detects that the signal from the crankshaft position sensor is out of the expected range or is not performing within specified parameters, it triggers the P0336 code.
Common Causes of P0336
- Faulty crankshaft position sensor
- Damaged or corroded sensor wiring
- Loose or poor connection between the sensor and ECM
- ECM software or hardware issues
- Engine timing belt or chain problems
Symptoms of P0336
- Engine misfires
- Rough idle
- Stalling
- Poor acceleration
- Difficulty starting the engine
How to Fix P0336
- Diagnose the issue by using a scan tool to confirm the P0336 code and inspect the crankshaft position sensor and its wiring.
- Replace the faulty crankshaft position sensor if it is found to be defective.
- Inspect and repair any damaged or corroded wiring connected to the sensor.
- Ensure all connections between the sensor and ECM are secure and functioning properly.
- Clear the DTC and test drive the vehicle to verify that the issue has been resolved.
Cost to Fix P0336
The typical repair costs for addressing a P0336 code can vary depending on the specific vehicle make and model, as well as labor rates in different regions. On average, the cost of replacing a crankshaft position sensor ranges from $100 to $300, including parts and labor. Additional costs may be incurred if there are other underlying issues contributing to the code. It's advisable to consult with a trusted mechanic or auto repair shop to get an accurate estimate based on your individual circumstances.
Tech Notes for P0336
When is the Code Detected?
Need more information about the P0336 code?
Need more information on how to fix the P0336 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0336 code diagnosed by a professional: Find a repair shop in your area
Code P0336 Information for Specific Makes
- P0336 Acura — Crankshaft Position Sensor 'A' Circuit Range/Performance
- P0336 Buick — Crankshaft Position Sensor Performance
- P0336 Cadillac — Crankshaft Position Sensor Performance
- P0336 Chevrolet — Crankshaft Position Sensor Performance
- P0336 Chrysler — Crankshaft Position Sensor Performace
- P0336 Dodge — Crankshaft Position Sensor Performace
- P0336 Ford — Crankshaft Position Sensor 'A' Circuit Range/Performance Condition
- P0336 GMC — Crankshaft Position Sensor Performance
- P0336 Honda — Crankshaft Position Sensor 'A' Circuit Range/Performance
- P0336 Hyundai — Crankshaft Position Sensor 'A' Circuit Range/Performance
- P0336 Isuzu — Crankshaft Position Sensor Performance
- P0336 Jaguar — Crankshaft Position Sensor 'A' Circuit Range/Performance Condition
- P0336 Jeep — Crankshaft Position Sensor Performace
- P0336 KIA — Crankshaft Position Sensor 'A' Circuit Range/Performance
- P0336 Lexus — Crankshaft Position Sensor 'A' Circuit Range/Performance
- P0336 Lincoln — Crankshaft Position Sensor 'A' Circuit Range/Performance Condition
- P0336 Mazda — Eccentric Shaft Position Sensor Circuit Range/Performance
- P0336 Mercedes-Benz — Crankshaft Position Sensor 'A' Circuit Range/Performance
- P0336 Mercury — Crankshaft Position Sensor 'A' Circuit Range/Performance Condition
- P0336 Pontiac — Crankshaft Position Sensor Performance
- P0336 Saturn — Crankshaft Position Sensor Performance
- P0336 Scion — Crankshaft Position Sensor 'A' Circuit Range/Performance
- P0336 Subaru — Crankshaft Position Sensor 'A' Circuit Range/Performance
- P0336 Toyota — Crankshaft Position Sensor 'A' Circuit Range/Performance
Frequently Asked Questions about P0336 Code
1. What are the common symptoms of OBDII code P0336 (Crankshaft Position Sensor 'A' Circuit Range/Performance)?
- Common symptoms include engine stalling, rough idling, difficulty starting the engine, and a decrease in fuel efficiency.
2. What are the possible causes of OBDII code P0336?
- The code P0336 can be caused by a faulty crankshaft position sensor, damaged wiring or connectors in the sensor circuit, or issues with the engine's timing belt or chain.
3. How can I diagnose the cause of OBDII code P0336?
- Diagnosing the code usually involves using a scan tool to read the code and checking the crankshaft position sensor for proper operation, inspecting the sensor's wiring and connections, and testing the engine's timing.
4. Can I continue driving with OBDII code P0336 present?
- It is not recommended to continue driving with the P0336 code as it can lead to further engine damage or failure. It is best to address the issue promptly.
5. How can I repair OBDII code P0336?
- Repairing the P0336 code may involve replacing the crankshaft position sensor, repairing or replacing damaged wiring or connectors, or addressing any timing belt/chain issues as necessary.
6. Are there any DIY tips for fixing OBDII code P0336?
- DIY tips for fixing the P0336 code include checking the sensor's wiring for any visible damage, ensuring proper sensor alignment, and consulting the vehicle's service manual for specific repair procedures.
7. Can a faulty crankshaft position sensor cause other issues besides triggering code P0336?
- Yes, a faulty crankshaft position sensor can cause a variety of issues such as poor engine performance, misfiring, and even a no-start condition.
8. How long does it typically take to repair OBDII code P0336?
- The time to repair the P0336 code can vary depending on the exact cause of the issue, but it generally takes a few hours to a full day to diagnose and fix the problem.
9. Will resetting the check engine light clear OBDII code P0336?
- Resetting the check engine light will clear the code temporarily, but if the underlying issue causing the P0336 code is not addressed, the code will likely reappear.
10. Is it safe to ignore OBDII code P0336 if my vehicle seems to be running fine?
- Ignoring the P0336 code, even if the vehicle appears to be running fine, is not recommended as it can lead to more severe engine problems over time. It is best to address the issue promptly to prevent further damage.
Discuss the causes and fixes for P0336 OBDII Code
Code P0336 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.