Engine-Codes.com
Engine-Codes – Hyundai – P0336 Hyundai

P0336 Hyundai Code - Crankshaft Position Sensor 'A' Circuit Range/Performance

Quick Answer

The P0336 code for Hyundai vehicles indicates that there is an issue with the Crankshaft Position Sensor 'A' Circuit Range/Performance. Common causes include Faulty crankshaft position sensor, Damaged wiring or connectors in the sensor circuit, Issues with the ECU. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0336 Hyundai indicates Crankshaft Position Sensor 'A' Circuit Range/Performance.
Common causes
Common causes include Faulty crankshaft position sensor, Damaged wiring or connectors in the sensor circuit, Issues with the ECU.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 10, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0336 Hyundai Description

The P0336 code for Hyundai vehicles indicates that there is an issue with the Crankshaft Position Sensor 'A' Circuit Range/Performance. The crankshaft position sensor is a vital component in the engine management system, as it monitors the position and rotational speed of the crankshaft. This information is crucial for the engine control unit (ECU) to accurately determine the ignition timing and fuel injection timing.

OBDII Code P0336 Hyundai - Crankshaft Position Sensor 'A' Circuit Range/Performance
P0336 Hyundai Code - Crankshaft Position Sensor 'A' Circuit Range/Performance

Common Causes of P0336 Hyundai

  1. Faulty crankshaft position sensor
  2. Damaged wiring or connectors in the sensor circuit
  3. Issues with the ECU
  4. Poor electrical connection
  5. Sensor misalignment or incorrect installation

Symptoms of P0336 Hyundai

  1. Engine misfires
  2. Rough idling
  3. Stalling
  4. Difficulty starting the engine
  5. Decreased fuel efficiency

How to Fix P0336 Hyundai

  1. Perform a diagnostic scan to confirm the P0336 code and identify the exact cause of the issue.
  2. Inspect the crankshaft position sensor, wiring, and connectors for any signs of damage or wear.
  3. Replace the faulty crankshaft position sensor if necessary.
  4. Repair or replace damaged wiring or connectors in the sensor circuit.
  5. Clear the fault code from the ECU memory and perform a test drive to ensure the issue has been resolved.

Cost to Fix P0336 Hyundai

The typical repair costs for addressing the P0336 code on a Hyundai vehicle can range from $150 to $300, depending on the specific cause of the issue and the cost of parts and labor. It is important to note that diagnosis time and labor rates at auto repair shops can vary, so it is advisable to check with local shops for a more accurate estimate. Additionally, rates may be higher at dealerships or metropolitan areas, while independent shops may offer more competitive pricing.

What does this mean?

Tech Notes for P0336 Hyundai

Sometimes and in some models, low battery voltage or a weak starter can trigger a Crankshaft Position Sensor code. Before replacing any parts, recharge or replaced battery.

When is the Code Detected?

The crankshaft position sensor (POS) signal is not detected by the Electronic Control Module (ECM) during the first few seconds of engine cranking

Need more information about the P0336 Hyundai code?

Need more information on how to fix the P0336 Hyundai code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0336 Hyundai code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0336 Hyundai Code

1. What are the common symptoms of OBDII code P0336 in a Hyundai related to the Crankshaft Position Sensor 'A' Circuit Range/Performance issue?

- Common symptoms include engine stalling, rough idling, difficulty starting the engine, and a decrease in fuel efficiency.

2. What are the possible causes of OBDII code P0336 in a Hyundai?

- The code P0336 can be triggered by a faulty crankshaft position sensor, damaged wiring or connectors, issues with the sensor's circuit, or a problem with the engine control module (ECM).

3. How can I diagnose the cause of OBDII code P0336 in my Hyundai?

- To diagnose the issue, you can use an OBDII scanner to read the fault codes, visually inspect the sensor and its wiring for any visible damage, and perform a continuity test on the sensor's circuit.

4. Can I continue to drive my Hyundai with OBDII code P0336 present?

- It is not recommended to drive your vehicle with the code P0336 as it can lead to further engine damage and potential safety hazards. It is best to address the issue promptly.

5. Is it possible to repair OBDII code P0336 in a Hyundai by replacing the crankshaft position sensor?

- Yes, in many cases, replacing the faulty crankshaft position sensor can resolve the P0336 code. Ensure to use a high-quality sensor compatible with your Hyundai model.

6. Are there any DIY tips for repairing OBDII code P0336 in a Hyundai?

- DIY tips include checking and cleaning the sensor's connections, inspecting the sensor for physical damage, and following the manufacturer's guidelines for sensor replacement.

7. How much does it typically cost to repair OBDII code P0336 in a Hyundai at a professional repair shop?

- The cost of repairing the P0336 code can vary depending on the exact cause of the issue, but it typically ranges from $150 to $300 for parts and labor.

8. Can a faulty crankshaft position sensor cause other issues in a Hyundai besides triggering OBDII code P0336?

- Yes, a faulty crankshaft position sensor can cause issues such as misfires, poor acceleration, and incorrect fuel injection timing, affecting the overall performance of the vehicle.

9. Is resetting the OBDII system enough to clear the P0336 code in a Hyundai, or is further action needed?

- While resetting the system may temporarily clear the code, it is important to address the underlying issue causing the P0336 code to prevent it from reoccurring.

10. How long does it typically take to repair OBDII code P0336 related to the Crankshaft Position Sensor 'A' Circuit in a Hyundai?

- The repair time can vary based on the exact cause of the issue and the technician's expertise, but it usually takes around 1-2 hours to diagnose and replace the crankshaft position sensor.

Discuss the causes and fixes for P0336 Hyundai OBDII Code

Submit a New Comment

Code P0336 Hyundai comments

No comments found for this page.