P0336 Subaru Code - Crankshaft Position Sensor 'A' Circuit Range/Performance
Quick Answer
The P0336 code for Subaru vehicles indicates a problem with the Crankshaft Position Sensor 'A' Circuit Range/Performance. Common causes include Faulty crankshaft position sensor, Damaged wiring or connectors, Corrosion or contamination affecting sensor operation. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0336 Subaru indicates Crankshaft Position Sensor 'A' Circuit Range/Performance.
- Common causes
- Common causes include Faulty crankshaft position sensor, Damaged wiring or connectors, Corrosion or contamination affecting sensor operation.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0336 Subaru Description
The P0336 code for Subaru vehicles indicates a problem with the Crankshaft Position Sensor 'A' Circuit Range/Performance. The crankshaft position sensor is a vital component of the engine management system, responsible for monitoring the position and speed of the crankshaft. This information is crucial for the engine control unit (ECU) to determine ignition timing, fuel injection timing, and other essential functions.
Common Causes of P0336 Subaru
- Faulty crankshaft position sensor
- Damaged wiring or connectors
- Corrosion or contamination affecting sensor operation
- Issues with the sensor circuitry or ECU
- Mechanical problems affecting the crankshaft
Symptoms of P0336 Subaru
- Rough idling or engine stalling
- Difficulty starting the engine
- Poor acceleration and overall performance
- Engine misfires or hesitation
- Illuminated check engine light on the dashboard
How to Fix P0336 Subaru
- Diagnose the issue by using a scan tool to retrieve the trouble code and check the sensor's operation
- Inspect the wiring and connectors for any damage or corrosion, repairing or replacing as necessary
- Test the sensor's output signal and resistance to determine if it is functioning correctly
- Replace the crankshaft position sensor if it is found to be faulty or out of specification
- Clear the trouble code from the ECU's memory and test drive the vehicle to verify that the issue has been resolved
Cost to Fix P0336 Subaru
The typical cost to repair a P0336 code in a Subaru vehicle can range from $150 to $300 for parts and labor. However, specific repair costs can vary depending on the location, vehicle make and model, and the labor rates at the auto repair shop. It is advisable to consult with a professional mechanic for an accurate estimate based on your specific circumstances.
Tech Notes for P0336 Subaru
When is the Code Detected?
Need more information about the P0336 Subaru code?
Need more information on how to fix the P0336 Subaru code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0336 Subaru code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0336 Subaru Code
1. What are the common symptoms of OBDII code P0336 in a Subaru related to the Crankshaft Position Sensor 'A' Circuit Range/Performance?
- Common symptoms include engine stalling, rough idling, difficulty starting the vehicle, and a decrease in fuel efficiency.
2. What are the potential causes of OBDII code P0336 in a Subaru?
- Potential causes may include a faulty crankshaft position sensor, wiring issues in the sensor circuit, a damaged sensor connector, or a malfunctioning engine control module (ECM).
3. How can I diagnose the root cause of OBDII code P0336 in my Subaru?
- To diagnose the issue, you can perform a visual inspection of the sensor and its wiring, test the sensor's electrical connections, check for signal output using a multimeter, and use professional diagnostic tools to scan the ECM for specific error codes.
4. Can I drive my Subaru with OBDII code P0336 present?
- It is not recommended to drive your Subaru with OBDII code P0336 present, as it can lead to further engine damage and potential safety hazards. It is best to address the issue promptly.
5. How do I repair OBDII code P0336 in my Subaru?
- Repairing OBDII code P0336 typically involves replacing the faulty crankshaft position sensor, repairing or replacing damaged wiring or connectors, and clearing the error code from the ECM.
6. Are there any preventive measures to avoid OBDII code P0336 in my Subaru?
- Regular maintenance of your Subaru, including scheduled inspections of the crankshaft position sensor and its wiring, can help prevent OBDII code P0336 from occurring.
7. Can a DIY enthusiast fix OBDII code P0336 in a Subaru?
- While some experienced DIY enthusiasts may be able to address OBDII code P0336 by following repair guides and using the right tools, it is recommended to consult a professional mechanic for accurate diagnosis and repair.
8. How much does it cost to repair OBDII code P0336 in a Subaru?
- The cost of repairing OBDII code P0336 in a Subaru can vary depending on the root cause of the issue, the cost of replacement parts, and labor charges. It is advisable to obtain quotes from reputable auto repair shops.
9. Will resetting the error code resolve OBDII code P0336 in my Subaru?
- Resetting the error code may temporarily clear the warning light, but it will not fix the underlying issue causing OBDII code P0336. It is essential to diagnose and repair the problem to prevent further complications.
10. How long does it take to repair OBDII code P0336 in a Subaru?
- The time needed to repair OBDII code P0336 in a Subaru can vary based on the extent of the issue, availability of parts, and the expertise of the mechanic. It is advisable to consult with a professional for an accurate time estimate.
Discuss the causes and fixes for P0336 Subaru OBDII Code
-
EJ25 broke the timing belt. Toasted the valves etc... Got a JDM EJ20. Cranks over good but no fire.
Code initially said PO336 (Crank shaft position sensor circuit range problem)> Cleared code and it will not repeat. Still no fire.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.