Engine-Codes.com
Engine-Codes – Mazda – P0336 Mazda

P0336 Mazda Code - Eccentric Shaft Position Sensor Circuit Range/Performance

Quick Answer

The P0336 code for Mazda vehicles specifically refers to the Eccentric Shaft Position Sensor Circuit Range/Performance. Common causes include Faulty eccentric shaft position sensor, Wiring issues or electrical connection problems, Sensor calibration errors. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0336 Mazda indicates Eccentric Shaft Position Sensor Circuit Range/Performance.
Common causes
Common causes include Faulty eccentric shaft position sensor, Wiring issues or electrical connection problems, Sensor calibration errors.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 06, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0336 Mazda Description

The P0336 code for Mazda vehicles specifically refers to the Eccentric Shaft Position Sensor Circuit Range/Performance. This code indicates that there is an issue with the sensor that monitors the position of the eccentric shaft in the engine. The eccentric shaft is a crucial component in the variable valve timing system, which helps optimize engine performance and efficiency.

OBDII Code P0336 Mazda - Eccentric Shaft Position Sensor Circuit Range/Performance
P0336 Mazda Code - Eccentric Shaft Position Sensor Circuit Range/Performance

Common Causes of P0336 Mazda

  1. Faulty eccentric shaft position sensor
  2. Wiring issues or electrical connection problems
  3. Sensor calibration errors
  4. Engine mechanical problems affecting the eccentric shaft
  5. ECM (Engine Control Module) failure

Symptoms of P0336 Mazda

  1. Rough idling
  2. Poor acceleration
  3. Reduced fuel efficiency
  4. Engine stalling
  5. Check engine light illumination

How to Fix P0336 Mazda

  1. Begin by diagnosing the root cause of the issue using a diagnostic scan tool to confirm the P0336 code and identify the specific problem with the eccentric shaft position sensor.
  2. Inspect the wiring and connections associated with the sensor for any signs of damage, corrosion, or loose connections. Repair or replace as necessary.
  3. Replace the eccentric shaft position sensor if it is determined to be faulty. Ensure the new sensor is calibrated correctly to provide accurate readings.
  4. Clear the diagnostic trouble codes from the ECM and test drive the vehicle to ensure the issue has been resolved.
  5. If the problem persists, further inspection of the eccentric shaft and related components may be necessary to identify any underlying mechanical issues.

Cost to Fix P0336 Mazda

The cost of repairing the Eccentric Shaft Position Sensor Circuit Range/Performance issue can vary depending on the specific vehicle make and model, as well as the labor rates in your area. On average, the parts for this repair can range from $100 to $300, while the labor costs can range from $150 to $300. Overall, you can expect to pay anywhere from $250 to $600 for this repair. It's always recommended to obtain quotes from local auto repair shops to get a more accurate estimate based on your specific circumstances.

What does this mean?

Tech Notes for P0336 Mazda

Sometimes and in some models, low battery voltage or a weak starter can trigger a Crankshaft Position Sensor code. Before replacing any parts, recharge or replaced battery.

When is the Code Detected?

The crankshaft position sensor (POS) signal is not detected by the Electronic Control Module (ECM) during the first few seconds of engine cranking

Need more information about the P0336 Mazda code?

Need more information on how to fix the P0336 Mazda code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0336 Mazda code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0336 Mazda Code

1. What are the common symptoms of OBDII code P0336 in a Mazda related to the Eccentric Shaft Position Sensor Circuit Range/Performance?

- Common symptoms include rough idling, engine misfires, loss of power, and illuminated check engine light.

2. What are the possible causes of the OBDII code P0336 in a Mazda?

- The code P0336 in a Mazda is often caused by a faulty eccentric shaft position sensor, damaged wiring or connectors, or a malfunctioning engine control module (ECM).

3. How can I diagnose the cause of OBDII code P0336 in my Mazda?

- You can diagnose the cause of code P0336 by using a scan tool to read the trouble code, checking the wiring and connectors for damage, and testing the eccentric shaft position sensor for proper operation.

4. Can a faulty eccentric shaft position sensor be repaired, or does it need to be replaced?

- In most cases, a faulty eccentric shaft position sensor will need to be replaced to resolve the P0336 code in a Mazda.

5. Is it safe to continue driving my Mazda with the OBDII code P0336 present?

- It is not recommended to continue driving your Mazda with the P0336 code present, as it can lead to further engine performance issues and potential damage.

6. Are there any DIY repair tips for addressing the OBDII code P0336 in a Mazda?

- DIY repair tips include checking and cleaning the wiring connectors, ensuring proper sensor alignment, and following the manufacturer's diagnostic procedures.

7. How much does it typically cost to repair the OBDII code P0336 in a Mazda at a professional automotive repair shop?

- The cost of repairing the P0336 code in a Mazda at a professional repair shop can vary, but it may range from $200 to $500 depending on the exact cause and parts needed.

8. Can resetting the check engine light make the OBDII code P0336 go away temporarily?

- Resetting the check engine light may temporarily clear the code, but it will likely return if the underlying issue causing the P0336 code is not addressed.

9. Will the OBDII code P0336 cause my Mazda to fail an emissions test?

- Yes, having the P0336 code present in your Mazda can cause it to fail an emissions test due to potential engine performance issues.

10. How long does it typically take to repair the OBDII code P0336 in a Mazda?

- The repair time for the P0336 code in a Mazda can vary depending on the exact cause and complexity of the repair, but it may take a few hours to a full day at a repair shop.

Discuss the causes and fixes for P0336 Mazda OBDII Code

Submit a New Comment

Code P0336 Mazda comments

No comments found for this page.