Engine-Codes.com
Engine-Codes – Infiniti – P010B Infiniti

P010B Infiniti Code - Mass Air Flow Circuit Range/Performance Bank 2

Quick Answer

The P010B code for Infiniti vehicles indicates a problem with the Mass Air Flow (MAF) sensor circuit on Bank 2. Common causes include Dirty or contaminated MAF sensor, Faulty MAF sensor, Vacuum leaks in the intake system. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P010B Infiniti indicates Mass Air Flow Circuit Range/Performance Bank 2.
Common causes
Common causes include Dirty or contaminated MAF sensor, Faulty MAF sensor, Vacuum leaks in the intake system.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 06, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P010B Infiniti Description

The P010B code for Infiniti vehicles indicates a problem with the Mass Air Flow (MAF) sensor circuit on Bank 2. This sensor is crucial for measuring the amount of air entering the engine, which is essential for the proper mixture of air and fuel. When this code is triggered, it means that the MAF sensor is not operating within the expected range or is not performing at the optimal level. This can lead to a variety of issues affecting the vehicle's performance, fuel efficiency, and emissions.

OBDII Code P010B Infiniti - Mass Air Flow Circuit Range/Performance Bank 2
P010B Infiniti Code - Mass Air Flow Circuit Range/Performance Bank 2

Common Causes of P010B Infiniti

  1. Dirty or contaminated MAF sensor
  2. Faulty MAF sensor
  3. Vacuum leaks in the intake system
  4. Wiring or connector issues in the MAF sensor circuit
  5. Air filter clogged or dirty

Symptoms of P010B Infiniti

  1. Engine misfires or rough idling
  2. Reduced fuel efficiency
  3. Hesitation or lack of power during acceleration
  4. Check Engine Light illuminated
  5. Stalling or difficulty starting the engine

How to Fix P010B Infiniti

  1. Start by inspecting the MAF sensor for any dirt or debris and clean it if necessary.
  2. Check for any vacuum leaks in the intake system and repair or replace any damaged hoses.
  3. Inspect the wiring and connectors in the MAF sensor circuit for any corrosion or damage, repairing or replacing as needed.
  4. Replace the MAF sensor if it is determined to be faulty and recalibrate as per manufacturer's instructions.
  5. Replace the air filter if it is dirty or clogged, as a restricted air flow can also trigger this code.

Cost to Fix P010B Infiniti

The typical repair costs for resolving a P010B code on an Infiniti vehicle can vary depending on the specific issue and parts needed. In general, the cost could range from $100 to $500, including parts and labor. However, it's essential to note that diagnosis time and labor rates can vary at different auto repair shops, so it's advisable to check with local shops for a more accurate estimate. Additionally, the cost may be higher if the MAF sensor needs to be replaced, as this is a more expensive component.

What does this mean?

Tech Notes for P010B Infiniti

Before replacing the mass air flow sensor, try replacing the air filter and cleaning the air flow sensor with low compressed air or Mass Air Flow Sensor Cleaner. Reset code and drive vehicle. If the code comes back, it may be necessary to replace the mass air flow sensor.

When is the Code Detected?

- A high voltage from the sensor is sent to Engine Control Module (ECM) under light load driving condition. - A low voltage from the sensor is sent to ECM

Need more information about the P010B Infiniti code?

Need more information on how to fix the P010B Infiniti code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P010B Infiniti code diagnosed by a professional: Find a repair shop in your area

Information for Specific Infiniti Models

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P010B Infiniti Code

No Frequently Asked Questions about P010B Infiniti Code found.

Discuss the causes and fixes for P010B Infiniti OBDII Code

Submit a New Comment