Engine-Codes.com
Engine-Codes – Infiniti – P010B 2007 Infiniti G35_sedan

P010B 2007 Infiniti G35_sedan Code - Mass Air Flow Circuit Range/Performance Bank 2

Quick Answer

The P010B code on a 2007 Infiniti G35 sedan indicates an issue with the Mass Air Flow (MAF) sensor circuit for Bank 2. Common causes include Dirty or contaminated MAF sensor, Faulty MAF sensor, Air intake leaks. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P010B 2007 Infiniti G35_sedan indicates Mass Air Flow Circuit Range/Performance Bank 2.
Common causes
Common causes include Dirty or contaminated MAF sensor, Faulty MAF sensor, Air intake leaks.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 10, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P010B 2007 Infiniti G35_sedan Description

The P010B code on a 2007 Infiniti G35 sedan indicates an issue with the Mass Air Flow (MAF) sensor circuit for Bank 2. The MAF sensor measures the amount of air entering the engine and plays a crucial role in determining the air-fuel mixture for combustion. In this case, the code specifically points to a range/performance issue with the MAF sensor on Bank 2, which typically refers to the side of the engine where cylinder number 2 is located.

OBDII Code P010B 2007 Infiniti G35_sedan - Mass Air Flow Circuit Range/Performance Bank 2
P010B 2007 Infiniti G35_sedan Code - Mass Air Flow Circuit Range/Performance Bank 2

Common Causes of P010B 2007 Infiniti G35_sedan

  1. Dirty or contaminated MAF sensor
  2. Faulty MAF sensor
  3. Air intake leaks
  4. Wiring or electrical issues
  5. ECM software or calibration problems

Symptoms of P010B 2007 Infiniti G35_sedan

  1. Reduced engine performance
  2. Poor fuel efficiency
  3. Rough idling or stalling
  4. Hesitation during acceleration
  5. Check engine light illuminated

How to Fix P010B 2007 Infiniti G35_sedan

  1. Start by visually inspecting the MAF sensor and its wiring for any signs of damage or contamination. Clean the sensor using MAF sensor cleaner if necessary.
  2. Check for air intake leaks or loose connections that could affect the MAF sensor readings.
  3. Test the MAF sensor using a multimeter to ensure it is functioning within specifications.
  4. If the MAF sensor is faulty, replace it with a new OEM or high-quality aftermarket part.
  5. Clear the diagnostic trouble codes and reset the ECM to see if the issue has been resolved.

Cost to Fix P010B 2007 Infiniti G35_sedan

The cost of repairing a Mass Air Flow Circuit Range/Performance issue on a 2007 Infiniti G35 sedan can vary depending on the root cause of the problem. Generally, replacing a faulty MAF sensor can cost anywhere from $100 to $400, including parts and labor. Additional costs may apply if there are other underlying issues that need to be addressed. It is advisable to consult with a trusted mechanic or auto repair shop for a more accurate estimate based on the specific diagnosis and repair requirements for your vehicle. Labor rates at auto repair shops typically range between $80 and $150 per hour, but rates may vary based on location and other factors.

What does this mean?

Tech Notes for P010B 2007 Infiniti G35_sedan

Before replacing the mass air flow sensor, try replacing the air filter and cleaning the air flow sensor with low compressed air or mass air flow sensor cleaner. Reset code and drive vehicle. If the code comes back, it may be necessary to replace the mass air flow sensor.

When is the Code Detected?

- A high voltage from the sensor is sent to Engine Control Module (ECM) under light load driving condition. - A low voltage from the sensor is sent to ECM

Need more information about the P010B 2007 Infiniti G35_sedan code?

Need more information on how to fix the P010B 2007 Infiniti G35_sedan code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P010B 2007 Infiniti G35_sedan code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P010B 2007 Infiniti G35_sedan Code

1. What are the common symptoms of OBDII code P010B on a 2007 Infiniti G35 sedan?

The common symptoms of P010B include poor engine performance, rough idling, decreased fuel efficiency, and potential stalling.

2. What are the possible causes of the Mass Air Flow Circuit Range/Performance Bank 2 code on a 2007 Infiniti G35 sedan?

The possible causes of P010B could be a faulty mass air flow sensor, air intake leaks, wiring issues, or a clogged air filter.

3. How can I diagnose the Mass Air Flow Circuit Range/Performance Bank 2 code on my 2007 Infiniti G35 sedan?

To diagnose P010B, you can use an OBDII scanner to read the code, visually inspect the air intake system for leaks, test the mass air flow sensor, and check the air filter condition.

4. Can a dirty air filter trigger OBDII code P010B on a 2007 Infiniti G35 sedan?

Yes, a dirty or clogged air filter can disrupt the proper airflow readings and lead to the triggering of P010B due to incorrect air-fuel mixture calculations.

5. How can I repair OBDII code P010B on my 2007 Infiniti G35 sedan?

To repair P010B, you may need to replace the mass air flow sensor, clean or replace the air filter, fix any air intake leaks, and ensure all wiring connections are secure.

6. Is it safe to continue driving my 2007 Infiniti G35 sedan with OBDII code P010B?

It is not recommended to continue driving your vehicle with P010B as it can lead to further engine damage and potential safety hazards. It's best to address the issue promptly.

7. Can a faulty oxygen sensor cause the Mass Air Flow Circuit Range/Performance Bank 2 code on a 2007 Infiniti G35 sedan?

While a faulty oxygen sensor can affect engine performance, it is not a direct cause of P010B. Focus on diagnosing the mass air flow sensor and related components.

8. Will resetting the OBDII code P010B on my 2007 Infiniti G35 sedan make it go away permanently?

Simply resetting the code may temporarily clear the warning, but if the underlying issue causing P010B is not addressed, the code is likely to reappear after some driving cycles.

9. Are there any preventive maintenance tips to avoid OBDII code P010B on a 2007 Infiniti G35 sedan?

Regularly inspect and replace the air filter, keep the mass air flow sensor clean, and promptly address any air intake system leaks to help prevent the occurrence of P010B.

10. How much can I expect to pay for repairs related to OBDII code P010B on my 2007 Infiniti G35 sedan?

The cost of repairs for P010B can vary based on the specific issue, but it typically ranges from $100 to $500, including parts and labor.

Discuss the causes and fixes for P010B 2007 Infiniti G35_sedan OBDII Code

Submit a New Comment

Code P010B 2007 Infiniti G35_sedan comments

No comments found for this page.