Engine-Codes.com
Engine-Codes – Infiniti – P010B 2012 Infiniti G37_sedan

P010B 2012 Infiniti G37_sedan Code - Mass Air Flow Circuit Range/Performance Bank 2

Quick Answer

The P010B diagnostic trouble code (DTC) for the 2012 Infiniti G37 Sedan indicates a problem related to the Mass Air Flow (MAF) sensor circuit in Bank 2 of the engine. Common causes include Faulty MAF sensor, Wiring or connector issues, Vacuum leaks. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P010B 2012 Infiniti G37_sedan indicates Mass Air Flow Circuit Range/Performance Bank 2.
Common causes
Common causes include Faulty MAF sensor, Wiring or connector issues, Vacuum leaks.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 12, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P010B 2012 Infiniti G37_sedan Description

The P010B diagnostic trouble code (DTC) for the 2012 Infiniti G37 Sedan indicates a problem related to the Mass Air Flow (MAF) sensor circuit in Bank 2 of the engine. The MAF sensor is a crucial component in the vehicle's engine management system, as it measures the amount of air entering the engine to determine the appropriate fuel mixture for combustion. In Bank 2, this refers to the side of the engine where cylinder number two is located.

OBDII Code P010B 2012 Infiniti G37_sedan - Mass Air Flow Circuit Range/Performance Bank 2
P010B 2012 Infiniti G37_sedan Code - Mass Air Flow Circuit Range/Performance Bank 2

Common Causes of P010B 2012 Infiniti G37_sedan

  1. Faulty MAF sensor
  2. Wiring or connector issues
  3. Vacuum leaks
  4. Dirty or contaminated MAF sensor
  5. Issues with the intake system

Symptoms of P010B 2012 Infiniti G37_sedan

  1. Decreased fuel efficiency
  2. Rough idling or stalling
  3. Hesitation or stumbling during acceleration
  4. Engine misfires
  5. Check Engine Light illuminated on the dashboard

How to Fix P010B 2012 Infiniti G37_sedan

  1. Begin by inspecting the MAF sensor, wiring, and connectors for any visible damage or contamination. Clean or replace the MAF sensor if necessary.
  2. Perform a smoke test to check for vacuum leaks in the intake system. Repair any leaks found.
  3. Clear the DTC and reset the engine control module (ECM) to see if the code returns.
  4. If the code persists, consider replacing the MAF sensor if it is determined to be faulty after further testing.
  5. Perform a final test drive to ensure the issue has been resolved and the vehicle's performance has been restored.

Cost to Fix P010B 2012 Infiniti G37_sedan

The cost of repairing a P010B code on a 2012 Infiniti G37 Sedan can vary depending on the specific cause of the issue and the cost of parts and labor in your area. Typically, replacing a faulty MAF sensor can cost between $100 to $400, including parts and labor. However, additional costs may apply if other components need to be repaired or replaced. It is advisable to consult with a trusted auto repair shop for a more accurate estimate based on your vehicle's specific needs. Keep in mind that labor rates can vary between different shops and locations.

What does this mean?

Tech Notes for P010B 2012 Infiniti G37_sedan

Before replacing the mass air flow sensor, try replacing the air filter and cleaning the air flow sensor with low compressed air or mass air flow sensor cleaner. Reset code and drive vehicle. If the code comes back, it may be necessary to replace the mass air flow sensor.

When is the Code Detected?

- A high voltage from the sensor is sent to Engine Control Module (ECM) under light load driving condition. - A low voltage from the sensor is sent to ECM

Need more information about the P010B 2012 Infiniti G37_sedan code?

Need more information on how to fix the P010B 2012 Infiniti G37_sedan code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P010B 2012 Infiniti G37_sedan code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P010B 2012 Infiniti G37_sedan Code

1. What are the common symptoms of OBDII code P010B on a 2012 Infiniti G37 sedan?

- Common symptoms include poor engine performance, reduced fuel efficiency, rough idling, and potential stalling.

2. What does the OBDII code P010B indicate specifically on a 2012 Infiniti G37 sedan?

- The P010B code signifies an issue with the Mass Air Flow (MAF) sensor circuit on Bank 2 of the engine.

3. What are the possible causes of the P010B code on a 2012 Infiniti G37 sedan?

- Potential causes include a faulty MAF sensor, air intake leaks, wiring issues, a dirty or contaminated MAF sensor, or problems with the engine control module.

4. How can I diagnose the P010B code on my 2012 Infiniti G37 sedan?

- Diagnosing the P010B code involves checking the MAF sensor for proper operation, inspecting for any air leaks in the intake system, testing the sensor circuit, and scanning for related codes.

5. Can a dirty MAF sensor trigger the P010B code on a 2012 Infiniti G37 sedan?

- Yes, a dirty or contaminated MAF sensor can lead to inaccurate readings and trigger the P010B code due to incorrect air flow measurements.

6. Is it safe to continue driving my 2012 Infiniti G37 sedan with the P010B code present?

- It is not recommended to drive with the P010B code active, as it can lead to further engine damage and potential safety hazards. Seek immediate diagnosis and repair.

7. How can I repair the P010B code on my 2012 Infiniti G37 sedan?

- Repair methods may include cleaning or replacing the MAF sensor, fixing any air leaks, addressing wiring issues, or resetting the engine control module.

8. Are there any DIY tips for resolving the P010B code on a 2012 Infiniti G37 sedan?

- While basic inspections like checking for loose connections or cleaning the MAF sensor can be DIY tasks, it's advisable to consult a professional for accurate diagnosis and repair.

9. Can resetting the OBDII system clear the P010B code on a 2012 Infiniti G37 sedan?

- Resetting the system may temporarily clear the code, but if the underlying issue like a faulty MAF sensor persists, the code is likely to reappear after driving cycles.

10. How much does it typically cost to repair the P010B code on a 2012 Infiniti G37 sedan?

- The repair costs for the P010B code can vary depending on the specific issue, but it's recommended to budget for MAF sensor replacement or repairs ranging from $100 to $400, including labor.

Discuss the causes and fixes for P010B 2012 Infiniti G37_sedan OBDII Code

Submit a New Comment

Code P010B 2012 Infiniti G37_sedan comments

No comments found for this page.