Engine-CodesGeneric – P246F

P246F Code - Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 1 Sensor 4

Quick Answer

The P246F diagnostic trouble code indicates an issue with the Exhaust Gas Temperature Sensor Circuit, specifically for Bank 1 Sensor 4. Common causes include Faulty exhaust gas temperature sensor, Wiring or connector issues in the sensor circuit, Exhaust system leaks. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P246F indicates Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 1 Sensor 4.
Common causes
Common causes include Faulty exhaust gas temperature sensor, Wiring or connector issues in the sensor circuit, Exhaust system leaks.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Table of contents Created and updated by William Orellana on Sep 06, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P246F Description

The P246F diagnostic trouble code indicates an issue with the Exhaust Gas Temperature Sensor Circuit, specifically for Bank 1 Sensor 4. The exhaust gas temperature sensor is responsible for monitoring the temperature of the exhaust gases leaving the engine. This information is crucial for the engine control unit to adjust fuel injection and timing to optimize performance and reduce emissions. When this sensor detects a range/performance issue, it means that the signal it is sending to the engine control unit is outside of the expected parameters. This can lead to poor engine performance, reduced fuel efficiency, and increased emissions.

OBDII Code P246F - Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 1 Sensor 4
P246F Code - Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 1 Sensor 4

Common Causes of P246F

  1. Faulty exhaust gas temperature sensor
  2. Wiring or connector issues in the sensor circuit
  3. Exhaust system leaks
  4. Exhaust system restrictions or blockages
  5. Engine control unit malfunction

Symptoms of P246F

  1. Decreased fuel efficiency
  2. Reduced engine performance
  3. Check Engine Light illuminated
  4. Rough idling or stalling
  5. Increased emissions

How to Fix P246F

  1. Diagnose the issue by using a scan tool to read the trouble code and further inspect the exhaust gas temperature sensor circuit.
  2. Inspect the wiring and connectors for any damage or corrosion. Repair or replace as necessary.
  3. Check for any exhaust leaks or restrictions in the system. Repair or replace affected components.
  4. Test the exhaust gas temperature sensor for proper operation. Replace if faulty.
  5. Clear the trouble code and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P246F

The cost of repairing a P246F code can vary depending on the specific cause of the issue and the labor rates in your area. On average, you can expect to pay between $200 and $500 for parts and labor. However, it's important to note that rates at auto repair shops can vary, so it's best to get a few quotes to determine the most accurate estimate for your situation.

Need more information about the P246F code?

Need more information on how to fix the P246F code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P246F code diagnosed by a professional: Find a repair shop in your area

Code P246F Information for Specific Makes

  • P246F Chevrolet — Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 1 Sensor 4
  • P246F Dodge — Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 1 Sensor 4
  • P246F Ford — Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 1 Sensor 4
  • P246F GMC — Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 1 Sensor 4
About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P246F Code

1. What are the common symptoms of OBDII code P246F?

- Common symptoms of code P246F include reduced engine performance, decreased fuel efficiency, and the illumination of the check engine light.

2. What can cause OBDII code P246F to trigger?

- The code P246F is typically triggered by issues with the exhaust gas temperature sensor circuit in Bank 1 Sensor 4, such as sensor malfunctions, wiring problems, or faulty connections.

3. How serious is OBDII code P246F?

- Code P246F should be addressed promptly as it can lead to poor engine performance and potential damage to the exhaust system if left unresolved.

4. Can I continue driving with OBDII code P246F active?

- It is not recommended to continue driving with code P246F active, as it can potentially cause further damage to the vehicle and result in higher repair costs.

5. How can I diagnose the cause of OBDII code P246F?

- Diagnosing code P246F involves using an OBDII scanner to read the code, inspecting the exhaust gas temperature sensor and its wiring, and checking for any loose connections or damage.

6. What are some repair tips for OBDII code P246F?

- Repair tips for code P246F include replacing the exhaust gas temperature sensor if faulty, repairing any damaged wiring, and ensuring all connections are secure.

7. Can a DIY enthusiast fix OBDII code P246F?

- While some DIY enthusiasts may be able to address code P246F by replacing the exhaust gas temperature sensor or repairing wiring, it is recommended to consult a professional mechanic for accurate diagnosis and repair.

8. How much does it typically cost to repair OBDII code P246F?

- The cost to repair code P246F can vary depending on the extent of the issue and the labor rates in your area. Typically, the repair cost ranges from $200 to $500.

9. Will resetting the OBDII code P246F turn off the check engine light?

- Resetting the code may temporarily turn off the check engine light, but if the underlying issue causing code P246F is not addressed, the light is likely to come back on.

10. How can I prevent OBDII code P246F from reoccurring?

- To prevent code P246F from reoccurring, it is important to perform regular maintenance on your vehicle, address any exhaust system issues promptly, and ensure proper functioning of the temperature sensor and its circuit.

Discuss the causes and fixes for P246F OBDII Code

Code P246F comments

No comments found for this page.