P246F Dodge Code - Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 1 Sensor 4
Quick Answer
The P246F diagnostic trouble code for Dodge vehicles indicates a problem with the Exhaust Gas Temperature (EGT) sensor circuit's range or performance on Bank 1 Sensor 4. Common causes include Faulty EGT sensor, Wiring or connector issues in the EGT sensor circuit, Exhaust system leaks. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P246F Dodge indicates Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 1 Sensor 4.
- Common causes
- Common causes include Faulty EGT sensor, Wiring or connector issues in the EGT sensor circuit, Exhaust system leaks.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P246F Dodge Description
The P246F diagnostic trouble code for Dodge vehicles indicates a problem with the Exhaust Gas Temperature (EGT) sensor circuit's range or performance on Bank 1 Sensor 4. This sensor is responsible for monitoring the exhaust gas temperature, which is crucial for the engine management system to optimize fuel efficiency, emissions, and overall performance. The EGT sensor is typically located in the exhaust system, after the diesel particulate filter (DPF) in modern diesel vehicles.
Common Causes of P246F Dodge
- Faulty EGT sensor.
- Wiring or connector issues in the EGT sensor circuit.
- Exhaust system leaks.
- Exhaust system blockages.
- Software or programming issues in the engine control module (ECM).
Symptoms of P246F Dodge
- Reduced engine performance.
- Increased fuel consumption.
- Illuminated Check Engine Light.
- Increased emissions.
- Limp mode activation.
How to Fix P246F Dodge
- Diagnose the issue using a scan tool to confirm the P246F code and pinpoint the exact cause.
- Inspect the EGT sensor, wiring, and connectors for any damage or corrosion.
- Check the exhaust system for leaks or blockages that could affect EGT sensor readings.
- Replace the faulty EGT sensor if necessary, ensuring proper installation and calibration.
- Clear the code and test drive the vehicle to verify that the issue has been resolved.
Cost to Fix P246F Dodge
The typical repair costs for resolving a P246F code on a Dodge vehicle can range from $200 to $500, depending on the specific cause of the issue and the cost of parts and labor. This estimate includes the price of a new EGT sensor, any necessary wiring repairs, and the labor involved in diagnosing and fixing the problem. It's important to note that actual repair costs can vary based on the location, vehicle make and model, and the specific diagnostic and labor rates at the auto repair shop. It is recommended to obtain quotes from local shops for a more accurate estimate.
Need more information about the P246F Dodge code?
Need more information on how to fix the P246F Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P246F Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P246F Dodge Code
1. What are the common symptoms of OBDII code P246F in a Dodge vehicle?
The common symptoms of code P246F include reduced engine power, poor fuel economy, black smoke from the exhaust, and the illumination of the Check Engine Light.
2. What can cause the OBDII code P246F to trigger in a Dodge vehicle?
The P246F code is usually triggered by a faulty exhaust gas temperature sensor, a damaged wiring harness, or a malfunctioning engine control module (ECM).
3. How can I diagnose the cause of OBDII code P246F in my Dodge vehicle?
Diagnosing code P246F involves using a scan tool to retrieve the fault codes, testing the exhaust gas temperature sensor, inspecting the wiring for damage, and checking the ECM for proper operation.
4. Can I continue to drive my Dodge vehicle with OBDII code P246F present?
It is not recommended to drive your vehicle with code P246F present, as it can lead to more serious issues and potential damage to the engine or emissions system.
5. How can I repair OBDII code P246F in my Dodge vehicle?
Repairing code P246F may involve replacing the exhaust gas temperature sensor, repairing any damaged wiring, or reprogramming the ECM to correct the circuit range/performance issue.
6. Are there any DIY tips for fixing OBDII code P246F in a Dodge vehicle?
While some basic diagnostic steps can be performed by DIY enthusiasts, repairing code P246F often requires specialized tools and knowledge, so it is recommended to consult a professional mechanic.
7. Is OBDII code P246F a common issue in Dodge vehicles?
Code P246F is not as common as some other OBDII codes, but it can still occur in Dodge vehicles, especially in those with high mileage or poor maintenance history.
8. How much does it typically cost to fix OBDII code P246F in a Dodge vehicle?
The cost of repairing code P246F can vary depending on the exact cause of the issue, but it may range from $200 to $500 or more, including parts and labor.
9. Can resetting the Check Engine Light clear OBDII code P246F in a Dodge vehicle?
Resetting the Check Engine Light may temporarily clear the code, but if the underlying issue is not addressed, the code is likely to return once the system re-tests.
10. Will OBDII code P246F cause my Dodge vehicle to fail an emissions test?
Yes, if code P246F is present, it indicates a problem with the emissions system, which can cause your Dodge vehicle to fail an emissions test until the issue is resolved.
Discuss the causes and fixes for P246F Dodge OBDII Code
Code P246F Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.