P246F GMC Code - Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 1 Sensor 4
Quick Answer
The P246F GMC code refers to the Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 1 Sensor 4. Common causes include Faulty exhaust gas temperature sensor, Wiring issues, Engine control module malfunction. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P246F GMC indicates Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 1 Sensor 4.
- Common causes
- Common causes include Faulty exhaust gas temperature sensor, Wiring issues, Engine control module malfunction.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P246F GMC Description
The P246F GMC code refers to the Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 1 Sensor 4. This code indicates that there is an issue with the exhaust gas temperature sensor located in Bank 1 Sensor 4 of the vehicle. The exhaust gas temperature sensor is responsible for monitoring the temperature of the exhaust gases coming out of the engine. This information is crucial for the engine control module to adjust the air-fuel mixture and optimize engine performance.
Common Causes of P246F GMC
- Faulty exhaust gas temperature sensor
- Wiring issues
- Engine control module malfunction
- Exhaust system leaks
- Exhaust gas recirculation (EGR) valve issues
Symptoms of P246F GMC
- Decreased fuel efficiency
- Power loss
- Rough idling
- Difficulty starting
- Failed emissions tests
How to Fix P246F GMC
- Diagnose the issue by using a diagnostic scanner to read the trouble code and determine the specific cause of the malfunction.
- Inspect the exhaust gas temperature sensor and its wiring for any visible damage or corrosion. Replace the sensor if necessary.
- Check the engine control module for any faults or errors. Reset or reprogram the module as needed.
- Inspect the exhaust system for leaks or damage that may be affecting sensor readings. Repair or replace any damaged components.
- Clear the trouble code from the engine control module's memory and perform a test drive to ensure the issue has been resolved.
Cost to Fix P246F GMC
The typical repair costs for addressing the P246F GMC code can range from $200 to $500, including parts and labor. However, it is important to note that the specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Rates in metropolitan areas or at dealerships may be higher, while independent shops often charge less. It is advisable to check local rates for a more precise estimate before proceeding with the repair.
Need more information about the P246F GMC code?
Need more information on how to fix the P246F GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P246F GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P246F GMC Code
1. What are common symptoms of OBDII code P246F GMC?
- Common symptoms include reduced engine performance, decreased fuel efficiency, and the illumination of the check engine light.
2. What causes OBDII code P246F GMC to be triggered?
- This code is typically triggered by a faulty exhaust gas temperature sensor, wiring issues, or a problem with the sensor circuit.
3. How can I diagnose the cause of OBDII code P246F GMC?
- Diagnosing the issue involves using a scan tool to read the code, checking the exhaust gas temperature sensor and its wiring for damage, and testing the sensor's functionality.
4. Can I continue driving my vehicle with OBDII code P246F GMC?
- It is not recommended to continue driving with this code active, as it can lead to further damage to the engine or emissions system.
5. What are some repair tips for fixing OBDII code P246F GMC?
- Repair tips include replacing the faulty exhaust gas temperature sensor, repairing any damaged wiring, and clearing the code with a scan tool after the repair.
6. Is it possible to reset OBDII code P246F GMC without fixing the underlying issue?
- While you can clear the code temporarily, it will likely return if the root cause of the issue is not addressed.
7. Can a DIY enthusiast repair OBDII code P246F GMC?
- Depending on your mechanical skills and access to tools, you may be able to replace the exhaust gas temperature sensor yourself. However, diagnosing and repairing wiring issues may require professional assistance.
8. How much does it typically cost to repair OBDII code P246F GMC?
- Repair costs can vary depending on the underlying issue, but replacing the exhaust gas temperature sensor can range from $100 to $300, including parts and labor.
9. Are there any preventive measures to avoid OBDII code P246F GMC in the future?
- Regularly inspecting and maintaining the exhaust gas temperature sensor and its wiring can help prevent this code from appearing in the future.
10. How urgent is it to address OBDII code P246F GMC once detected?
- It is recommended to address this code promptly to prevent potential damage to the engine or emissions system and restore optimal vehicle performance.
Discuss the causes and fixes for P246F GMC OBDII Code
Code P246F GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.