P1656 Code - Oil Control Valve Circuit Malfunction
Quick Answer
The P1656 diagnostic trouble code (DTC) indicates a malfunction in the oil control valve circuit. Common causes include Faulty oil control valve, Wiring or connector issues in the oil control valve circuit, Low engine oil level or dirty oil. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1656 indicates Oil Control Valve Circuit Malfunction.
- Common causes
- Common causes include Faulty oil control valve, Wiring or connector issues in the oil control valve circuit, Low engine oil level or dirty oil.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1656 Description
The P1656 diagnostic trouble code (DTC) indicates a malfunction in the oil control valve circuit. The oil control valve is responsible for regulating the flow of oil to various engine components, ensuring proper lubrication and performance. When this circuit malfunctions, it can lead to issues with oil flow, potentially causing engine damage and reduced performance. This code may trigger the vehicle's check engine light to illuminate, alerting the driver to a problem that needs attention.
Common Causes of P1656
- Faulty oil control valve
- Wiring or connector issues in the oil control valve circuit
- Low engine oil level or dirty oil
- Engine timing issues
- Engine control module (ECM) malfunction
Symptoms of P1656
- Check engine light illuminated
- Engine running rough or misfiring
- Reduced engine performance
- Engine stalling or hesitation
- Increased fuel consumption
How to Fix P1656
- Perform a visual inspection of the oil control valve and its wiring for any visible damage or wear.
- Test the oil control valve using a multimeter to check for proper resistance and functionality.
- Check and replace engine oil if dirty or low.
- Inspect and repair any damaged wiring or connectors in the oil control valve circuit.
- Reset the vehicle's ECM and clear the trouble code to see if the issue persists.
Cost to Fix P1656
The cost to repair a P1656 code can vary depending on the specific cause of the issue. On average, the repair cost for this code ranges from $100 to $300 for parts and labor. However, as mentioned earlier, labor rates at auto repair shops can vary, so it's recommended to check with local shops for a more accurate estimate based on your vehicle make and model.
When is the Code Detected?
Need more information about the P1656 code?
Need more information on how to fix the P1656 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1656 code diagnosed by a professional: Find a repair shop in your area
Code P1656 Information for Specific Makes
- P1656 Acura — Electronic Stability Programme Control Module Communication Malfunction
- P1656 Audi — A/C Signal Short To Ground
- P1656 Buick — Intake Camshaft Actuator Control Circuit
- P1656 Cadillac — Intake Camshaft Actuator Control Circuit
- P1656 Chevrolet — Intake Camshaft Actuator Control Circuit
- P1656 Dodge — 5V Reference Circuit
- P1656 Ford — CAN Link PCM Circuit Network
- P1656 GMC — Intake Camshaft Actuator Control Circuit
- P1656 Honda — Electronic Stability Programme Control Module Communication Malfunction
- P1656 Lexus — Oil Control Valve Circuit Malfunction
- P1656 Pontiac — Intake Camshaft Actuator Control Circuit
- P1656 Saab — A/C Relay Open Circuit / Short To Ground
- P1656 Toyota — Oil Control Valve Circuit Malfunction
- P1656 Volkswagen — A/C Signal Short To Ground
Frequently Asked Questions about P1656 Code
1. What are the common symptoms of OBDII code P1656 (Oil Control Valve Circuit Malfunction)?
- Common symptoms include rough idling, engine misfires, decreased fuel efficiency, and in some cases, the Check Engine light may illuminate.
2. What are the possible causes of OBDII code P1656?
- The code P1656 can be triggered by issues such as a faulty oil control valve, wiring or connection problems, low engine oil levels, or a malfunctioning Engine Control Module (ECM).
3. How can I diagnose the cause of OBDII code P1656?
- To diagnose the cause of P1656, a technician may perform a visual inspection of the oil control valve and associated wiring, conduct tests using a multimeter, and check the engine oil level and quality.
4. Can I continue driving my vehicle with OBDII code P1656?
- It is not recommended to continue driving your vehicle with code P1656 as it can lead to engine performance issues and potential damage. It's best to address the problem promptly.
5. How can I repair OBDII code P1656?
- Repairing code P1656 may involve replacing the oil control valve, repairing or replacing damaged wiring or connections, ensuring proper engine oil levels, and resetting the fault code using a diagnostic tool.
6. Are there any DIY tips for addressing OBDII code P1656?
- DIY tips for P1656 may include checking and tightening loose connections, inspecting the oil control valve for debris or blockages, and ensuring the engine oil is at the correct level and in good condition.
7. Is it safe to reset the Check Engine light after fixing OBDII code P1656?
- Yes, it is safe to reset the Check Engine light after fixing code P1656. This can be done using a diagnostic tool to clear the fault code and turn off the warning light.
8. How long does it typically take to repair OBDII code P1656?
- The time required to repair P1656 can vary depending on the underlying cause and complexity of the issue. In general, it may take anywhere from 1 to 3 hours for diagnosis and repair.
9. Can weather conditions affect the triggering of OBDII code P1656?
- Extreme weather conditions such as very low temperatures can potentially affect the functioning of the oil control valve and lead to the triggering of code P1656.
10. Will OBDII code P1656 cause permanent damage to my vehicle if left untreated?
- Ignoring and leaving code P1656 untreated can potentially lead to engine performance issues and damage over time. It's important to address the problem promptly to prevent further complications.
Discuss the causes and fixes for P1656 OBDII Code
Code P1656 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.