P119E GMC Code - NOx Sensor 2 Signal Circuit Low Voltage
Quick Answer
The P119E GMC code refers to a fault in the NOx (Nitrogen Oxide) Sensor 2 Signal Circuit, specifically indicating a low voltage condition. Common causes include Faulty NOx sensor, Damaged wiring or connectors in the NOx sensor circuit, ECM malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P119E GMC indicates NOx Sensor 2 Signal Circuit Low Voltage.
- Common causes
- Common causes include Faulty NOx sensor, Damaged wiring or connectors in the NOx sensor circuit, ECM malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P119E GMC Description
The P119E GMC code refers to a fault in the NOx (Nitrogen Oxide) Sensor 2 Signal Circuit, specifically indicating a low voltage condition. This sensor is crucial for monitoring the levels of harmful nitrogen oxides in the vehicle's exhaust gases. When the signal voltage is lower than expected, it can lead to inaccurate readings and potential issues with the vehicle's emissions system.
Common Causes of P119E GMC
- Faulty NOx sensor
- Damaged wiring or connectors in the NOx sensor circuit
- ECM malfunction
- Exhaust leaks
- Contaminated exhaust system components
Symptoms of P119E GMC
- Check engine light illuminated
- Reduced fuel efficiency
- Decreased engine performance
- Increased emissions output
- Vehicle failing emissions tests
How to Fix P119E GMC
- Perform a comprehensive diagnostic scan to confirm the P119E GMC code and identify the specific cause of the low voltage signal.
- Inspect the wiring and connectors in the NOx sensor circuit for any signs of damage or corrosion. Repair or replace as necessary.
- Test the NOx sensor for proper functionality or replace it if found to be faulty.
- Clear the fault code from the ECM's memory and perform a test drive to verify that the issue has been resolved.
- If the problem persists, further diagnostics may be required to address underlying issues with the ECM or exhaust system components.
Cost to Fix P119E GMC
The cost of repairing a NOx Sensor 2 Signal Circuit Low Voltage issue can vary depending on the specific cause of the fault and the labor rates at the auto repair shop. On average, the repair for this issue can range from $200 to $500, including parts and labor. It's important to keep in mind that the final cost may be higher if additional components need to be replaced or if extensive diagnostics are required. As labor rates can vary, it's recommended to obtain quotes from multiple repair shops to ensure a competitive price.
Need more information about the P119E GMC code?
Need more information on how to fix the P119E GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P119E GMC code diagnosed by a professional: Find a repair shop in your area
Information for Specific GMC Models
- P119E 2014 GMC Sierra — NOx Sensor 2 Signal Circuit Low Voltage
- P119E 2015 GMC Sierra — NOx Sensor 2 Signal Circuit Low Voltage
- P119E 2016 GMC Sierra — NOx Sensor 2 Signal Circuit Low Voltage
- P119E 2017 GMC Sierra — NOx Sensor 2 Signal Circuit Low Voltage
- P119E 2018 GMC Sierra — NOx Sensor 2 Signal Circuit Low Voltage
Frequently Asked Questions about P119E GMC Code
1. What are common symptoms of OBDII code P119E GMC (NOx Sensor 2 Signal Circuit Low Voltage)?
- Common symptoms include reduced engine performance, decreased fuel efficiency, and the illumination of the check engine light.
2. What can cause the OBDII code P119E GMC to trigger?
- The code P119E GMC is triggered when the NOx Sensor 2 signal circuit detects a low voltage condition, which can be caused by issues such as wiring faults, sensor malfunction, or a faulty NOx sensor.
3. How can I diagnose the cause of OBDII code P119E GMC?
- Diagnosing the cause of P119E GMC involves inspecting the wiring harness for damage, testing the NOx sensor's voltage output, and checking for any corrosion or loose connections.
4. Can I continue driving my vehicle with OBDII code P119E GMC?
- It is not recommended to drive the vehicle with an active P119E GMC code, as it can lead to further damage and potential safety hazards. It is best to address the issue promptly.
5. What are the repair options for OBDII code P119E GMC?
- Repair options include replacing the NOx sensor, repairing any damaged wiring, resetting the fault code, and ensuring proper connections to resolve the low voltage signal issue.
6. How much does it typically cost to repair OBDII code P119E GMC?
- The cost of repairing P119E GMC can vary depending on the extent of the issue, the need for parts replacement, and labor costs. It is advisable to consult with a professional mechanic for an accurate estimate.
7. Can a DIY enthusiast fix OBDII code P119E GMC at home?
- While some DIY enthusiasts may be able to diagnose and address simple wiring issues related to P119E GMC, it is recommended to seek professional help for accurate diagnosis and repair of NOx sensor-related problems.
8. Are there any preventative measures to avoid OBDII code P119E GMC in the future?
- Regular vehicle maintenance, including checking and cleaning sensor connections, inspecting wiring harnesses, and using quality fuel, can help prevent issues that may trigger the P119E GMC code.
9. How urgent is it to address OBDII code P119E GMC?
- It is recommended to address the P119E GMC code promptly to avoid potential damage to the vehicle's emissions system, engine performance, and overall drivability.
10. Can a faulty NOx sensor cause other problems besides triggering OBDII code P119E GMC?
- Yes, a faulty NOx sensor can lead to issues such as increased emissions, reduced fuel efficiency, and potential damage to the catalytic converter if left unresolved.
Discuss the causes and fixes for P119E GMC OBDII Code
Code P119E GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.