P119E 2015 GMC Sierra Code - NOx Sensor 2 Signal Circuit Low Voltage
Quick Answer
The P119E diagnostic trouble code (DTC) for a 2015 GMC Sierra indicates a problem with the NOx (Nitrogen Oxide) Sensor 2 Signal Circuit, specifically low voltage. Common causes include Faulty NOx Sensor 2: The sensor itself may be malfunctioning, sending incorrect voltage signals to the ECM, Wiring or Connector Issues: Corrosion, damage, or loose connections in the wiring harness or connectors can disrupt the signal between the sensor and ECM, ECM Malfunction: A problem with the engine control module (ECM) could prevent proper communication with the NOx Sensor 2. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P119E 2015 GMC Sierra indicates NOx Sensor 2 Signal Circuit Low Voltage.
- Common causes
- Common causes include Faulty NOx Sensor 2: The sensor itself may be malfunctioning, sending incorrect voltage signals to the ECM, Wiring or Connector Issues: Corrosion, damage, or loose connections in the wiring harness or connectors can disrupt the signal between the sensor and ECM, ECM Malfunction: A problem with the engine control module (ECM) could prevent proper communication with the NOx Sensor 2.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P119E 2015 GMC Sierra Description
The P119E diagnostic trouble code (DTC) for a 2015 GMC Sierra indicates a problem with the NOx (Nitrogen Oxide) Sensor 2 Signal Circuit, specifically low voltage. This sensor is responsible for monitoring the level of nitrogen oxide emissions in the exhaust system. When the voltage signal from the NOx Sensor 2 is lower than expected, it can lead to issues with the vehicle's emissions control system, potentially causing the engine to run inefficiently and increasing harmful emissions.
Common Causes of P119E 2015 GMC Sierra
- Faulty NOx Sensor 2: The sensor itself may be malfunctioning, sending incorrect voltage signals to the ECM.
- Wiring or Connector Issues: Corrosion, damage, or loose connections in the wiring harness or connectors can disrupt the signal between the sensor and ECM.
- ECM Malfunction: A problem with the engine control module (ECM) could prevent proper communication with the NOx Sensor 2.
- Exhaust System Leak: A leak in the exhaust system before the sensor could lead to inaccurate readings.
- Fuel System Problems: Issues with the fuel system, such as a clogged fuel filter or faulty fuel injectors, could impact the sensor's readings.
Symptoms of P119E 2015 GMC Sierra
- Check Engine Light: The most common symptom associated with this code is the illumination of the Check Engine Light on the vehicle's dashboard.
- Reduced Fuel Efficiency: A malfunctioning NOx Sensor 2 can lead to decreased fuel efficiency as the engine may not be operating optimally.
- Poor Engine Performance: The vehicle may experience rough idling, hesitation, or lack of power when accelerating.
- Failed Emissions Test: If the NOx emissions are not within acceptable limits, the vehicle may fail emissions testing.
How to Fix P119E 2015 GMC Sierra
- Diagnose the Issue: Use a diagnostic scanner to retrieve the trouble codes and perform tests to pinpoint the exact cause of the low voltage signal from the NOx Sensor 2.
- Inspect Wiring and Connectors: Check the wiring harness and connectors for any damage, corrosion, or loose connections. Repair or replace as needed.
- Test NOx Sensor 2: Test the NOx Sensor 2 to determine if it is functioning correctly. Replace the sensor if it is found to be faulty.
- Check ECM Functionality: Verify that the engine control module (ECM) is operating properly and communicating with the sensor. Repair or replace the ECM if necessary.
- Clear Codes and Test Drive: After completing the repairs, clear the trouble codes from the ECM and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P119E 2015 GMC Sierra
The cost of repairing a NOx Sensor 2 Signal Circuit Low Voltage issue on a 2015 GMC Sierra can vary depending on the specific cause of the problem and the parts and labor required for the repair. In general, the cost of replacing a NOx sensor can range from $200 to $500, including parts and labor. However, if the issue is related to wiring or ECM problems, the cost may be higher due to additional diagnostic and repair work.
Need more information about the P119E 2015 GMC Sierra code?
Need more information on how to fix the P119E 2015 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P119E 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P119E 2015 GMC Sierra Code
What does OBD-II code P119E mean in a 2015 GMC Sierra?
Code P119E indicates a low voltage issue in the signal circuit of NOx Sensor 2, which monitors nitrogen oxide levels in the exhaust system.
What are the common symptoms of P119E in a 2015 GMC Sierra?
Symptoms include reduced fuel efficiency, increased emissions, poor engine performance, and a check engine light.
What causes code P119E in a 2015 GMC Sierra?
Common causes include a faulty NOx Sensor 2, damaged wiring or connectors, excessive soot buildup, or issues with the exhaust system.
Can driving with code P119E damage my 2015 GMC Sierra?
Driving with this code may lead to increased emissions, reduced engine efficiency, and potential damage to the exhaust or emissions system over time.
How do you diagnose P119E on a 2015 GMC Sierra?
Diagnosis involves scanning for codes, inspecting the NOx Sensor 2 and its wiring, checking for exhaust leaks, and testing the sensor's voltage readings.
How can P119E be fixed on a 2015 GMC Sierra?
Repairs may include replacing the NOx Sensor 2, repairing damaged wiring, cleaning the exhaust system, or updating the vehicle’s software.
How much does it cost to repair code P119E on a 2015 GMC Sierra?
The repair cost typically ranges from $200 to $600, depending on whether the sensor or wiring needs replacement.
Can a dirty exhaust system cause P119E in a 2015 GMC Sierra?
Yes, excessive soot or carbon buildup in the exhaust system can interfere with NOx sensor readings and trigger the code.
Does P119E affect emissions testing for a 2015 GMC Sierra?
Yes, this code can cause the vehicle to fail emissions testing due to inaccurate NOx readings and increased pollution.
Is it necessary to replace NOx Sensor 2 to fix P119E?
Not always. If the issue is due to damaged wiring or connectors, repairing them may resolve the problem without replacing the sensor.
Discuss the causes and fixes for P119E 2015 GMC Sierra OBDII Code
Code P119E 2015 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.