P119E 2014 GMC Sierra Code - NOx Sensor 2 Signal Circuit Low Voltage
Quick Answer
The P119E diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates a problem with the NOx (Nitrogen Oxide) Sensor 2 Signal Circuit registering low voltage. Common causes include Faulty NOx Sensor: The most common cause of this code is a malfunctioning NOx sensor, which may have internal electrical issues or sensor element degradation, Wiring or Connector Issues: Corrosion, damage, or poor connections in the wiring harness or connectors associated with the NOx sensor can lead to low voltage signals, ECM Malfunction: A problem with the engine control module (ECM) that processes the NOx sensor signals can also trigger this code. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P119E 2014 GMC Sierra indicates NOx Sensor 2 Signal Circuit Low Voltage.
- Common causes
- Common causes include Faulty NOx Sensor: The most common cause of this code is a malfunctioning NOx sensor, which may have internal electrical issues or sensor element degradation, Wiring or Connector Issues: Corrosion, damage, or poor connections in the wiring harness or connectors associated with the NOx sensor can lead to low voltage signals, ECM Malfunction: A problem with the engine control module (ECM) that processes the NOx sensor signals can also trigger this code.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P119E 2014 GMC Sierra Description
The P119E diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates a problem with the NOx (Nitrogen Oxide) Sensor 2 Signal Circuit registering low voltage. The NOx sensor is a crucial component in the vehicle's emissions control system, responsible for monitoring and regulating the levels of nitrogen oxides in the exhaust gases. When the NOx Sensor 2 Signal Circuit detects low voltage, it means that there is an issue with the sensor's ability to accurately measure the NOx levels, which can lead to increased emissions and potential regulatory compliance problems.
Common Causes of P119E 2014 GMC Sierra
- Faulty NOx Sensor: The most common cause of this code is a malfunctioning NOx sensor, which may have internal electrical issues or sensor element degradation.
- Wiring or Connector Issues: Corrosion, damage, or poor connections in the wiring harness or connectors associated with the NOx sensor can lead to low voltage signals.
- ECM Malfunction: A problem with the engine control module (ECM) that processes the NOx sensor signals can also trigger this code.
- Exhaust System Leaks: Any leaks in the exhaust system before the NOx sensor can introduce false air into the system, affecting sensor readings.
- Exhaust Gas Recirculation (EGR) System Problems: Issues with the EGR system, such as clogging or malfunctioning components, can impact NOx sensor performance.
Symptoms of P119E 2014 GMC Sierra
- Check Engine Light: The most common symptom associated with this code is the illumination of the Check Engine Light on the vehicle's dashboard.
- Reduced Fuel Efficiency: A malfunctioning NOx sensor can lead to suboptimal fuel-air mixture ratios, resulting in decreased fuel efficiency.
- Poor Engine Performance: The ECM may adjust engine parameters based on faulty NOx sensor readings, leading to rough idling or hesitation during acceleration.
- Failed Emissions Test: If the NOx levels are not accurately monitored and controlled, the vehicle may fail emissions tests due to excessive nitrogen oxide emissions.
How to Fix P119E 2014 GMC Sierra
- Diagnose the Issue: Use a diagnostic scanner to retrieve the trouble codes and perform a thorough inspection of the NOx sensor, wiring, connectors, and related components.
- Test the NOx Sensor: Check the NOx sensor's voltage output using a multimeter to verify if it is within the specified range.
- Inspect Wiring and Connectors: Examine the wiring harness and connectors for any damage, corrosion, or loose connections, repairing or replacing as necessary.
- Address ECM Issues: If the ECM is suspected to be the cause of the problem, consider reprogramming or replacing the module after confirming the diagnosis.
- Clear Codes and Test Drive: After completing the repairs, clear the trouble codes from the ECM memory and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P119E 2014 GMC Sierra
The cost of repairing a NOx Sensor 2 Signal Circuit Low Voltage issue on a 2014 GMC Sierra can vary depending on the specific cause of the problem and the labor rates in your area. Generally, the cost of a new NOx sensor can range from $200 to $500, while labor costs for diagnosis and replacement can add another $100 to $300. Overall, you can expect a total repair cost of approximately $300 to $800 for this issue. Keep in mind that prices may fluctuate based on location, vehicle make and model, and the extent of the repairs needed. It's recommended to obtain quotes from local auto repair shops to get a more accurate estimate for your specific situation.
Need more information about the P119E 2014 GMC Sierra code?
Need more information on how to fix the P119E 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P119E 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P119E 2014 GMC Sierra Code
No Frequently Asked Questions about P119E 2014 GMC Sierra Code found.
Discuss the causes and fixes for P119E 2014 GMC Sierra OBDII Code
Code P119E 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.