P116C GMC Code - O2 Signal Circuit High Voltage (NOx Sensor 1)
Quick Answer
The P116C code for GMC vehicles indicates an issue with the O2 signal circuit, specifically indicating high voltage from the NOx sensor 1. Common causes include Faulty NOx sensor 1, Wiring issues in the O2 signal circuit, ECM malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P116C GMC indicates O2 Signal Circuit High Voltage (NOx Sensor 1).
- Common causes
- Common causes include Faulty NOx sensor 1, Wiring issues in the O2 signal circuit, ECM malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P116C GMC Description
The P116C code for GMC vehicles indicates an issue with the O2 signal circuit, specifically indicating high voltage from the NOx sensor 1. The NOx sensor is responsible for monitoring the levels of nitrogen oxide in the exhaust gases, providing crucial data for the vehicle's emissions control system. When the O2 signal circuit displays high voltage, it suggests that the sensor is detecting an abnormally high amount of NOx in the exhaust stream.
Common Causes of P116C GMC
- Faulty NOx sensor 1
- Wiring issues in the O2 signal circuit
- ECM malfunction
- Exhaust system leaks
- Contaminated fuel or exhaust gases
Symptoms of P116C GMC
- Decreased fuel efficiency
- Engine misfires or hesitation
- Check Engine Light illuminated
- Increased emissions output
- Rough idling or stalling
How to Fix P116C GMC
- Begin by conducting a thorough inspection of the NOx sensor 1 and the O2 signal circuit to identify any visible damage or issues.
- Test the sensor's voltage output using a multimeter to determine if it is within the expected range.
- Replace the NOx sensor 1 if it is found to be faulty, ensuring the new sensor is properly calibrated and installed.
- Check and repair any damaged wiring in the O2 signal circuit, ensuring proper connections and insulation.
- Clear the error code from the ECM's memory and conduct a test drive to verify that the issue has been resolved.
Cost to Fix P116C GMC
The cost of repairing a P116C code for GMC vehicles can vary depending on the specific cause of the issue and the cost of parts and labor in your area. On average, the cost of replacing a NOx sensor 1 can range from $200 to $500, including parts and labor. However, additional costs may apply if wiring repairs or ECM diagnostics are needed. It is recommended to consult with a qualified mechanic or dealership for a more accurate estimate based on your vehicle's make and model. Additionally, labor rates at auto repair shops can vary, with hourly rates typically ranging from $80 to $150.
Need more information about the P116C GMC code?
Need more information on how to fix the P116C GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P116C GMC code diagnosed by a professional: Find a repair shop in your area
Information for Specific GMC Models
- P116C 2014 GMC Sierra — O2 Signal Circuit High Voltage (NOx Sensor 1)
- P116C 2015 GMC Sierra — O2 Signal Circuit High Voltage (NOx Sensor 1)
- P116C 2016 GMC Sierra — O2 Signal Circuit High Voltage (NOx Sensor 1)
- P116C 2017 GMC Sierra — O2 Signal Circuit High Voltage (NOx Sensor 1)
- P116C 2018 GMC Sierra — O2 Signal Circuit High Voltage (NOx Sensor 1)
Frequently Asked Questions about P116C GMC Code
1. What are the common symptoms of OBDII code P116C GMC?
- Common symptoms include poor engine performance, reduced fuel efficiency, and the illumination of the check engine light.
2. What are the possible causes of O2 Signal Circuit High Voltage (NOx Sensor 1) code P116C in a GMC vehicle?
- Possible causes include a faulty NOx sensor, wiring issues in the O2 signal circuit, or problems with the powertrain control module (PCM).
3. How can I diagnose the O2 signal circuit high voltage issue related to code P116C in my GMC vehicle?
- Diagnose by checking the NOx sensor wiring for damage, testing the sensor's resistance and voltage output, and inspecting the PCM for any faults.
4. Can a dirty or contaminated NOx sensor trigger OBDII code P116C in a GMC vehicle?
- Yes, a dirty or contaminated NOx sensor can cause erroneous readings and trigger code P116C due to high voltage in the O2 signal circuit.
5. What are some repair tips for addressing code P116C GMC related to the O2 signal circuit high voltage issue?
- Repair tips include cleaning or replacing the NOx sensor, repairing any damaged wiring, and resetting the fault codes after completing the repairs.
6. Is it safe to continue driving my GMC vehicle with OBDII code P116C indicating a high voltage issue in the O2 signal circuit?
- It is not recommended to drive the vehicle with code P116C present, as it can lead to further damage and potentially affect the vehicle's emissions performance.
7. Can a DIY enthusiast fix O2 signal circuit high voltage issues related to code P116C in a GMC vehicle?
- While some basic troubleshooting and repairs can be done by a DIY enthusiast, complex diagnostics and sensor replacements may require professional assistance.
8. How important is it to address code P116C GMC promptly to avoid potential engine damage?
- It is important to address code P116C promptly to prevent potential engine damage, ensure optimal fuel efficiency, and maintain the vehicle's emissions compliance.
9. Are there any recalls or technical service bulletins related to OBDII code P116C in GMC vehicles?
- It is recommended to check with the manufacturer or a GMC dealership for any recalls or technical service bulletins related to code P116C and the NOx sensor issue.
10. What is the typical cost of repairing O2 signal circuit high voltage issues associated with code P116C in a GMC vehicle?
- The cost of repair can vary depending on the exact cause of the issue, but it may involve sensor replacement, wiring repairs, or PCM reprogramming, potentially ranging from $200 to $800 or more.
Discuss the causes and fixes for P116C GMC OBDII Code
Code P116C GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.