P116C 2015 GMC Sierra Code - O2 Signal Circuit High Voltage (NOx Sensor 1)
Quick Answer
The P116C diagnostic trouble code (DTC) for a 2015 GMC Sierra indicates an issue with the O2 signal circuit high voltage related to the NOx (Nitrogen Oxide) sensor 1. Common causes include Faulty NOx sensor, Wiring harness issues, Defective ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P116C 2015 GMC Sierra indicates O2 Signal Circuit High Voltage (NOx Sensor 1).
- Common causes
- Common causes include Faulty NOx sensor, Wiring harness issues, Defective ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P116C 2015 GMC Sierra Description
The P116C diagnostic trouble code (DTC) for a 2015 GMC Sierra indicates an issue with the O2 signal circuit high voltage related to the NOx (Nitrogen Oxide) sensor 1. The NOx sensor is responsible for monitoring the nitrogen oxide levels in the exhaust system to ensure compliance with emissions regulations. When the O2 signal circuit detects a high voltage, it means that there is an abnormality in the sensor's signal output, which can lead to incorrect fuel mixture adjustments by the engine control module (ECM).
Common Causes of P116C 2015 GMC Sierra
- Faulty NOx sensor
- Wiring harness issues
- Defective ECM
- Exhaust leaks
- Sensor contamination
Symptoms of P116C 2015 GMC Sierra
- Decreased fuel efficiency
- Rough idling
- Hesitation during acceleration
- Engine misfires
- Illumination of the check engine light
How to Fix P116C 2015 GMC Sierra
- Perform a thorough inspection of the NOx sensor and its wiring harness to check for any visible damage.
- Test the NOx sensor using a multimeter to verify its functionality.
- Check for exhaust leaks that could be affecting sensor readings.
- Clean the sensor to remove any contamination that may be causing inaccurate readings.
- If necessary, replace the NOx sensor or repair any damaged wiring harnesses.
Cost to Fix P116C 2015 GMC Sierra
The typical repair costs for addressing a P116C code on a 2015 GMC Sierra can range from $200 to $500, including parts and labor. However, it is important to note that specific diagnosis time and labor rates can vary depending on the location, vehicle make and model, and engine type. Auto repair shops commonly charge between $80 and $150 per hour for labor, with rates potentially higher in metropolitan areas or at dealerships and lower at independent shops. To obtain a more accurate estimate, it is recommended to inquire about local rates.
Need more information about the P116C 2015 GMC Sierra code?
Need more information on how to fix the P116C 2015 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P116C 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P116C 2015 GMC Sierra Code
1. What does the OBDII code P116C mean on a 2015 GMC Sierra?
P116C indicates "O2 Signal Circuit High Voltage" related to NOx Sensor 1, which monitors nitrogen oxide levels in the exhaust system.
2. What are the symptoms of code P116C on a 2015 GMC Sierra?
Common symptoms include reduced fuel efficiency, check engine light illumination, poor engine performance, and possible emissions test failure.
3. What causes code P116C on a 2015 GMC Sierra?
Possible causes include a faulty NOx sensor, damaged wiring or connectors, excessive exhaust contamination, or issues with the engine control module (ECM).
4. Can I drive my 2015 GMC Sierra with code P116C active?
While the vehicle may still be drivable, prolonged operation with this code could lead to increased emissions, reduced performance, and potential damage to other components.
5. How is code P116C diagnosed on a 2015 GMC Sierra?
A mechanic will typically use a scan tool to confirm the code, inspect the NOx sensor and wiring, and perform voltage and continuity tests to pinpoint the issue.
6. How do you fix code P116C on a 2015 GMC Sierra?
Repairs may involve replacing the NOx sensor, repairing damaged wiring or connectors, cleaning the exhaust system, or reprogramming the ECM.
7. How much does it cost to fix the P116C code on a 2015 GMC Sierra?
Repair costs vary but typically range from $200 to $600, depending on whether the NOx sensor or other components need replacement.
8. Can a dirty exhaust system cause code P116C on a 2015 GMC Sierra?
Yes, excessive soot or contamination in the exhaust system can interfere with the NOx sensor’s operation and trigger this code.
9. How do I prevent code P116C from recurring on my 2015 GMC Sierra?
Regular maintenance, including keeping the exhaust system clean and addressing engine issues promptly, can help prevent this code from returning.
10. Is it necessary to replace the NOx sensor for code P116C on a 2015 GMC Sierra?
Replacing the NOx sensor is necessary if it is found to be faulty after diagnostics; however, the issue might also stem from wiring or ECM problems.
Discuss the causes and fixes for P116C 2015 GMC Sierra OBDII Code
Code P116C 2015 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.