P116C 2014 GMC Sierra Code - O2 Signal Circuit High Voltage (NOx Sensor 1)
Quick Answer
The P116C diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates an issue with the O2 signal circuit high voltage related to the NOx sensor 1. Common causes include Faulty NOx sensor, Damaged wiring or connectors in the O2 signal circuit, ECM software issue. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P116C 2014 GMC Sierra indicates O2 Signal Circuit High Voltage (NOx Sensor 1).
- Common causes
- Common causes include Faulty NOx sensor, Damaged wiring or connectors in the O2 signal circuit, ECM software issue.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P116C 2014 GMC Sierra Description
The P116C diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates an issue with the O2 signal circuit high voltage related to the NOx sensor 1. The NOx sensor is responsible for monitoring the levels of nitrogen oxide in the exhaust gases of the vehicle. When the O2 signal circuit detects a high voltage, it means that the sensor is sending a signal indicating an excessive amount of oxygen in the exhaust stream. This can lead to incorrect fuel mixture adjustments by the engine control module (ECM), potentially causing poor fuel economy, reduced engine performance, and increased emissions.
Common Causes of P116C 2014 GMC Sierra
- Faulty NOx sensor
- Damaged wiring or connectors in the O2 signal circuit
- ECM software issue
- Exhaust system leaks
- Contaminated fuel
Symptoms of P116C 2014 GMC Sierra
- Check engine light illuminated
- Decreased fuel efficiency
- Engine running rough or misfiring
- Increased emissions output
- Reduced engine power
How to Fix P116C 2014 GMC Sierra
- Use an OBD-II scanner to confirm the P116C code and diagnose the specific issue with the NOx sensor.
- Inspect the wiring and connectors in the O2 signal circuit for any damage or corrosion, repairing or replacing as needed.
- Test the NOx sensor for proper function and replace if found to be faulty.
- Clear the DTC and reset the ECM to see if the code returns, indicating a successful repair.
- Perform a road test to ensure the vehicle's performance has returned to normal and that the check engine light remains off.
Cost to Fix P116C 2014 GMC Sierra
The typical repair costs for addressing a P116C code on a 2014 GMC Sierra can vary depending on the specific cause of the issue. Generally, the cost of replacing a NOx sensor can range from $200 to $500, while repairing wiring or connectors may cost around $100 to $300. Labor rates at auto repair shops can range from $80 to $150 per hour, so the total cost for parts and labor could be between $300 and $800. It's recommended to consult with a professional mechanic for a more accurate estimate based on the specific diagnosis and repair needed for your vehicle.
Need more information about the P116C 2014 GMC Sierra code?
Need more information on how to fix the P116C 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P116C 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P116C 2014 GMC Sierra Code
1. What does the OBDII code P116C mean on a 2014 GMC Sierra?
P116C indicates a high voltage issue in the oxygen (O2) signal circuit of NOx Sensor 1, which monitors nitrogen oxide levels in the exhaust system for emissions control.
2. What are the common symptoms of code P116C in a 2014 GMC Sierra?
Symptoms may include an illuminated check engine light, reduced fuel efficiency, poor engine performance, and possible emissions test failure.
3. What causes the P116C code to appear on a 2014 GMC Sierra?
Common causes include a faulty NOx sensor, damaged wiring or connectors in the O2 signal circuit, a malfunctioning engine control module (ECM), or excessive soot buildup on the sensor.
4. How do I diagnose the P116C code on my 2014 GMC Sierra?
Start by inspecting the NOx sensor and its wiring for damage or corrosion. Use a scan tool to monitor sensor voltages and confirm if the signal is out of range.
5. Can I drive my 2014 GMC Sierra with a P116C code?
While the vehicle may still be drivable, it is not recommended to ignore the issue as it can lead to increased emissions, poor performance, and potential damage to other components.
6. How do I fix the P116C code on my 2014 GMC Sierra?
Repairs may include replacing the NOx sensor, repairing or replacing damaged wiring or connectors, cleaning the sensor, or updating/reprogramming the ECM.
7. How much does it cost to repair a P116C code on a 2014 GMC Sierra?
The repair cost can vary, but replacing a NOx sensor typically ranges from $300 to $700, depending on labor rates and parts pricing.
8. Can a dirty or clogged NOx sensor cause the P116C code?
Yes, soot buildup or contamination on the NOx sensor can interfere with its signal, causing high voltage readings and triggering the P116C code.
9. Is it necessary to replace the NOx sensor to fix the P116C code?
Not always. If the issue is caused by damaged wiring or a loose connector, repairing those components may resolve the code without replacing the sensor.
10. How can I prevent the P116C code from recurring on my 2014 GMC Sierra?
Regularly maintain the exhaust system, use high-quality fuel, and address any engine performance issues promptly to prevent damage to the NOx sensor and related components.
Discuss the causes and fixes for P116C 2014 GMC Sierra OBDII Code
Code P116C 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.