P116C Chevrolet Code - O2 Signal Circuit High Voltage (NOx Sensor 1)
Quick Answer
The P116C Chevrolet code indicates an issue with the O2 (oxygen) sensor signal circuit, specifically the NOx (nitrogen oxide) sensor 1. Common causes include Faulty NOx sensor, Wiring or connector issues in the O2 sensor circuit, Exhaust leaks near the sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P116C Chevrolet indicates O2 Signal Circuit High Voltage (NOx Sensor 1).
- Common causes
- Common causes include Faulty NOx sensor, Wiring or connector issues in the O2 sensor circuit, Exhaust leaks near the sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P116C Chevrolet Description
The P116C Chevrolet code indicates an issue with the O2 (oxygen) sensor signal circuit, specifically the NOx (nitrogen oxide) sensor 1. The NOx sensor is responsible for measuring the level of nitrogen oxides in the exhaust gases to ensure compliance with emissions regulations. When the O2 signal circuit shows high voltage, it means that the sensor is reading a higher-than-normal level of oxygen in the exhaust gases. This can lead to incorrect fuel mixture adjustments by the engine control module, resulting in poor fuel efficiency, increased emissions, and potentially engine performance issues.
Common Causes of P116C Chevrolet
- Faulty NOx sensor
- Wiring or connector issues in the O2 sensor circuit
- Exhaust leaks near the sensor
- Engine running too rich or lean
- Faulty engine control module
Symptoms of P116C Chevrolet
- Check engine light illuminated
- Decreased fuel efficiency
- Rough idling or stalling
- Increased emissions output
- Engine misfires or hesitation
How to Fix P116C Chevrolet
- Begin by diagnosing the root cause of the high voltage signal, using a diagnostic scanner to retrieve the specific trouble code and pinpoint the issue.
- Inspect the NOx sensor and its wiring for any signs of damage, corrosion, or loose connections. Replace the sensor if necessary.
- Check for exhaust leaks near the sensor and repair them to prevent false readings.
- Test the engine control module to ensure it is functioning correctly and making appropriate fuel adjustments based on sensor readings.
- Clear the trouble code from the vehicle's memory and perform a test drive to verify that the issue has been resolved.
Cost to Fix P116C Chevrolet
The cost of repairing a P116C Chevrolet code can vary depending on the specific cause of the issue. In general, replacing a faulty NOx sensor can cost between $150 and $300, while addressing wiring or connector issues may range from $100 to $200. Labor costs at auto repair shops typically range from $80 to $150 per hour, with additional charges for diagnostic time. It's advisable to consult with a certified mechanic to get an accurate estimate based on your vehicle make and model.
Need more information about the P116C Chevrolet code?
Need more information on how to fix the P116C Chevrolet code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P116C Chevrolet code diagnosed by a professional: Find a repair shop in your area
Information for Specific Chevrolet Models
- P116C 2014 Chevrolet Silverado — O2 Signal Circuit High Voltage (NOx Sensor 1)
- P116C 2015 Chevrolet Silverado — O2 Signal Circuit High Voltage (NOx Sensor 1)
- P116C 2016 Chevrolet Silverado — O2 Signal Circuit High Voltage (NOx Sensor 1)
- P116C 2017 Chevrolet Silverado — O2 Signal Circuit High Voltage (NOx Sensor 1)
- P116C 2018 Chevrolet Silverado — O2 Signal Circuit High Voltage (NOx Sensor 1)
Frequently Asked Questions about P116C Chevrolet Code
1. What does the OBDII code P116C mean on a Chevrolet?
P116C indicates a high voltage problem in the O2 signal circuit of NOx Sensor 1, which monitors nitrogen oxide levels in the exhaust system.
2. What are the common symptoms of code P116C?
Symptoms include the check engine light turning on, reduced fuel efficiency, poor engine performance, and potentially entering limp mode.
3. What causes the P116C code to appear?
Common causes include a faulty NOx sensor, damaged wiring or connectors in the O2 signal circuit, or issues with the engine control module (ECM).
4. Can a dirty NOx sensor cause the P116C code?
Yes, a dirty or contaminated NOx sensor can cause incorrect readings, leading to the P116C code.
5. How do I diagnose the P116C code on a Chevrolet?
Start by inspecting the NOx sensor and its wiring for damage, corrosion, or loose connections. Use a scan tool to confirm the code and check live data from the sensor.
6. Is it safe to drive with the P116C code?
It’s not recommended to drive with this code for an extended period, as it may lead to increased emissions, reduced performance, and potential damage to the catalytic converter.
7. How do you fix the P116C code?
Repairs may involve replacing the NOx sensor, repairing damaged wiring, or updating/reprogramming the ECM if needed.
8. How much does it cost to repair the P116C code?
Repair costs vary but typically range from $200 to $700, depending on whether the NOx sensor needs replacement or if extensive wiring repairs are required.
9. Can a software update fix the P116C code?
In some cases, an ECM software update or reprogramming may be required to resolve the issue if the fault is related to incorrect ECM calibration.
10. How can I prevent the P116C code from returning?
Regular maintenance, including checking the exhaust system, keeping sensors clean, and addressing any wiring issues, can reduce the likelihood of this code reappearing.
Discuss the causes and fixes for P116C Chevrolet OBDII Code
Code P116C Chevrolet comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.