P116C 2016 Chevrolet Silverado Code - O2 Signal Circuit High Voltage (NOx Sensor 1)
Quick Answer
The P116C diagnostic trouble code (DTC) for a 2016 Chevrolet Silverado indicates an issue with the O2 signal circuit high voltage related to the NOx sensor 1. Common causes include Faulty NOx sensor, Damaged wiring or connectors in the O2 signal circuit, Malfunctioning engine control module (ECM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P116C 2016 Chevrolet Silverado indicates O2 Signal Circuit High Voltage (NOx Sensor 1).
- Common causes
- Common causes include Faulty NOx sensor, Damaged wiring or connectors in the O2 signal circuit, Malfunctioning engine control module (ECM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P116C 2016 Chevrolet Silverado Description
The P116C diagnostic trouble code (DTC) for a 2016 Chevrolet Silverado indicates an issue with the O2 signal circuit high voltage related to the NOx sensor 1. The NOx sensor is responsible for monitoring the levels of nitrogen oxide in the exhaust gases to ensure compliance with emissions regulations. When the O2 signal circuit shows high voltage, it means that the sensor is detecting an excessive amount of oxygen in the exhaust stream, which can lead to a lean air-fuel mixture.
Common Causes of P116C 2016 Chevrolet Silverado
- Faulty NOx sensor.
- Damaged wiring or connectors in the O2 signal circuit.
- Malfunctioning engine control module (ECM).
- Vacuum leak affecting air-fuel mixture.
- Exhaust system leaks.
Symptoms of P116C 2016 Chevrolet Silverado
- Check engine light illuminated on the dashboard.
- Decreased fuel efficiency.
- Rough idling or engine misfires.
- Failed emissions test.
- Reduced engine performance.
How to Fix P116C 2016 Chevrolet Silverado
- Diagnose the issue using a scan tool to retrieve the specific DTC and pinpoint the cause of the high voltage signal.
- Inspect the NOx sensor, wiring, and connectors for any visible damage or corrosion.
- Test the NOx sensor's functionality using a multimeter to ensure it is sending accurate signals.
- Replace the NOx sensor if it is found to be faulty, and repair any damaged wiring or connectors.
- Clear the DTC and perform a test drive to verify that the issue has been resolved.
Cost to Fix P116C 2016 Chevrolet Silverado
The typical repair costs for addressing a P116C code on a 2016 Chevrolet Silverado can range from $200 to $500, including parts and labor. However, it is important to note that the specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Rates in metropolitan areas or at dealerships may be higher, while independent shops often charge less. It is advisable to check local rates for a more precise estimate before proceeding with the repair.
Need more information about the P116C 2016 Chevrolet Silverado code?
Need more information on how to fix the P116C 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P116C 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P116C 2016 Chevrolet Silverado Code
1. What does the OBDII code P116C mean on a 2016 Chevrolet Silverado?
P116C indicates a high voltage issue in the O2 signal circuit for NOx sensor 1, which monitors nitrogen oxide emissions in the exhaust system.
2. What are the common symptoms of code P116C in a 2016 Silverado?
Symptoms include an illuminated check engine light, reduced fuel efficiency, poor engine performance, and possibly a failed emissions test.
3. What causes the P116C code to appear?
The most common causes are a faulty NOx sensor, damaged wiring or connectors in the O2 signal circuit, or issues with the engine control module (ECM).
4. Can I drive my 2016 Silverado with a P116C code?
While the vehicle may still be drivable, continued use can lead to increased emissions, poor performance, and potential damage to other components like the catalytic converter.
5. How do you diagnose the P116C code in a 2016 Chevrolet Silverado?
Diagnosis involves using a scan tool to confirm the code, inspecting the NOx sensor and related wiring for damage, and testing the sensor’s voltage output.
6. How do you fix the P116C code on a 2016 Silverado?
Repairs may include replacing the faulty NOx sensor, repairing damaged wiring or connectors, or reprogramming/updating the ECM if needed.
7. How much does it cost to fix the P116C code in a 2016 Chevrolet Silverado?
The cost can vary, but replacing a NOx sensor typically ranges from $400 to $800, including parts and labor.
8. What tools are needed to troubleshoot the P116C code?
You’ll need an OBDII scan tool, a multimeter to test electrical circuits, and potentially specialized tools to remove and replace the NOx sensor.
9. Can a dirty or clogged exhaust system cause the P116C code?
While uncommon, excessive soot or debris in the exhaust system could potentially affect the NOx sensor’s readings and trigger the code.
10. How can I prevent the P116C code from occurring again?
Regular maintenance, such as ensuring the exhaust system is clean and inspecting wiring and connectors for damage, can help prevent this code from reappearing.
Discuss the causes and fixes for P116C 2016 Chevrolet Silverado OBDII Code
Code P116C 2016 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.