P116C 2018 Chevrolet Silverado Code - O2 Signal Circuit High Voltage (NOx Sensor 1)
Quick Answer
The P116C diagnostic trouble code (DTC) in a 2018 Chevrolet Silverado indicates an issue with the O2 signal circuit high voltage for NOx Sensor 1. Common causes include Faulty NOx sensor, Wiring issues or shorts in the O2 signal circuit, ECM software or programming issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P116C 2018 Chevrolet Silverado indicates O2 Signal Circuit High Voltage (NOx Sensor 1).
- Common causes
- Common causes include Faulty NOx sensor, Wiring issues or shorts in the O2 signal circuit, ECM software or programming issues.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P116C 2018 Chevrolet Silverado Description
The P116C diagnostic trouble code (DTC) in a 2018 Chevrolet Silverado indicates an issue with the O2 signal circuit high voltage for NOx Sensor 1. This code is specifically related to the Nitrogen Oxide (NOx) sensor, which plays a crucial role in monitoring and controlling emissions in the vehicle's exhaust system. The NOx sensor is responsible for detecting the levels of nitrogen oxide in the exhaust gases and providing feedback to the engine control module (ECM) to adjust fuel mixture and optimize combustion.
Common Causes of P116C 2018 Chevrolet Silverado
- Faulty NOx sensor
- Wiring issues or shorts in the O2 signal circuit
- ECM software or programming issues
- Exhaust system leaks or damage
- Contaminated fuel affecting combustion
Symptoms of P116C 2018 Chevrolet Silverado
- Decreased fuel efficiency
- Rough idling
- Hesitation during acceleration
- Engine misfires
- Failed emissions test
How to Fix P116C 2018 Chevrolet Silverado
- Begin by conducting a thorough inspection of the NOx sensor, wiring, and O2 signal circuit to identify any visible damage or issues.
- Test the NOx sensor using a multimeter to check for proper voltage output and resistance.
- Check for any exhaust leaks or damage that may be affecting the sensor's readings.
- If necessary, replace the NOx sensor and repair any damaged wiring or connections.
- Clear the DTC from the ECM memory and perform a test drive to ensure the issue has been resolved.
Cost to Fix P116C 2018 Chevrolet Silverado
The typical repair costs for addressing a P116C code in a 2018 Chevrolet Silverado can range from $200 to $500, including parts and labor. However, it's important to note that the specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Rates in metropolitan areas or at dealerships may be higher, while independent shops often charge less. It's advisable to check local rates for a more precise estimate.
Need more information about the P116C 2018 Chevrolet Silverado code?
Need more information on how to fix the P116C 2018 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P116C 2018 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P116C 2018 Chevrolet Silverado Code
1. What does the OBDII code P116C mean on a 2018 Chevrolet Silverado?
P116C indicates that the NOx sensor 1 has detected a high voltage condition in the oxygen (O2) signal circuit, which typically monitors nitrogen oxide emissions.
2. What are the common symptoms of code P116C on a 2018 Chevrolet Silverado?
You may notice the check engine light, reduced fuel efficiency, rough idling, or decreased engine performance.
3. What causes the P116C code to appear on a 2018 Chevrolet Silverado?
Common causes include a faulty NOx sensor, damaged wiring or connectors in the O2 signal circuit, or issues with the vehicle's exhaust or emissions system.
4. Can a dirty NOx sensor cause the P116C code?
Yes, a dirty or contaminated NOx sensor can cause incorrect readings and trigger the P116C code.
5. How do you diagnose the P116C code on a 2018 Chevrolet Silverado?
Start by scanning the vehicle with an OBDII tool, inspecting the NOx sensor and its wiring for damage, and checking the exhaust system for leaks or blockages.
6. Is it safe to drive with the P116C code on a 2018 Chevrolet Silverado?
Driving is possible but not recommended, as it can lead to reduced performance, higher emissions, and potential damage to the emissions system.
7. How do you fix the P116C code on a 2018 Chevrolet Silverado?
Repairs typically involve replacing the faulty NOx sensor, repairing damaged wiring, or addressing exhaust system issues.
8. How much does it cost to repair the P116C code on a 2018 Chevrolet Silverado?
Replacing a NOx sensor can range from $300 to $700, depending on labor costs and sensor prices.
9. Can a software update fix the P116C code on a 2018 Chevrolet Silverado?
In some cases, a reflash or update of the vehicle's engine control module (ECM) may resolve the issue if it's related to software errors.
10. How can you prevent the P116C code from reoccurring?
Regular maintenance of the exhaust and emissions system, using high-quality fuel, and promptly addressing check engine light warnings can help prevent recurrence.
Discuss the causes and fixes for P116C 2018 Chevrolet Silverado OBDII Code
Code P116C 2018 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.