P0841 Code - Transmission Fluid Pressure Sensor/Switch 'A' Circuit Range/Performance
Quick Answer
The P0841 code indicates a problem with the Transmission Fluid Pressure Sensor/Switch 'A' Circuit Range/Performance. Common causes include Faulty transmission fluid pressure sensor/switch, Wiring or connector issues, Low transmission fluid level. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0841 indicates Transmission Fluid Pressure Sensor/Switch 'A' Circuit Range/Performance.
- Common causes
- Common causes include Faulty transmission fluid pressure sensor/switch, Wiring or connector issues, Low transmission fluid level.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0841 Description
The P0841 code indicates a problem with the Transmission Fluid Pressure Sensor/Switch 'A' Circuit Range/Performance. This sensor is responsible for monitoring the transmission fluid pressure and sending signals to the vehicle's computer system. When the sensor detects that the pressure is outside of the expected range, it triggers this diagnostic trouble code.
Common Causes of P0841
- Faulty transmission fluid pressure sensor/switch
- Wiring or connector issues
- Low transmission fluid level
- Contaminated or degraded transmission fluid
- Internal transmission problems
Symptoms of P0841
- Erratic shifting
- Transmission slipping
- Harsh shifting
- Transmission overheating
- Check Engine Light illuminated
How to Fix P0841
- Perform a diagnostic scan to confirm the P0841 code and identify the specific cause of the issue.
- Inspect the wiring and connectors for any damage or corrosion and repair as needed.
- Check the transmission fluid level and condition, top off or change the fluid if necessary.
- Replace the transmission fluid pressure sensor/switch if it is found to be faulty.
- Clear the trouble code and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0841
The cost of repairing the Transmission Fluid Pressure Sensor/Switch 'A' Circuit Range/Performance issue can vary depending on the specific cause of the problem and the vehicle's make and model. On average, the parts for this repair can range from $50 to $200, while labor costs can range from $100 to $300. Overall, the total repair cost may fall between $150 and $500. It is recommended to consult with a professional mechanic to get an accurate estimate based on your vehicle's unique circumstances.
Need more information about the P0841 code?
Need more information on how to fix the P0841 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0841 code diagnosed by a professional: Find a repair shop in your area
Code P0841 Information for Specific Makes
- P0841 Chrysler — LR Pressure Switch Rationality Fault
- P0841 Dodge — Low/Reverse Pressure Switch Rationality Fault
- P0841 Ford — Transmission Fluid Pressure Switch Circuit Range/Performance
- P0841 Infiniti — Transmission Fluid Pressure Sensor/Switch 'A' Circuit Range/Performance
- P0841 Jeep — LR Pressure Switch Rationality Fault
- P0841 Lincoln — Transmission Fluid Pressure Switch Circuit Range/Performance
- P0841 Mercedes-Benz — Transmission Fluid Pressure Sensor/Switch 'A' Circuit Range/Performance
- P0841 Mercury — Transmission Fluid Pressure Switch Circuit Range/Performance
- P0841 Nissan — Transmission Fluid Pressure Sensor/Switch 'A' Circuit Range/Performance
- P0841 RAM — LR Pressure Switch Rationality Fault
Frequently Asked Questions about P0841 Code
1. What are the common symptoms of OBDII code P0841?
The common symptoms of P0841 include harsh shifting, transmission slipping, transmission overheating, and illuminated Check Engine Light.
2. What are the possible causes of OBDII code P0841?
Possible causes of P0841 include a faulty transmission fluid pressure sensor/switch, low transmission fluid levels, dirty transmission fluid, a faulty transmission control module, or wiring issues.
3. How serious is OBDII code P0841?
P0841 can lead to serious transmission issues if left unresolved, such as transmission failure, poor performance, and unsafe driving conditions. It is important to address this code promptly.
4. How can I diagnose OBDII code P0841?
Diagnosing P0841 typically involves using a scan tool to read the code, checking the transmission fluid level and condition, inspecting the wiring and connectors, and testing the transmission fluid pressure sensor/switch.
5. Can I drive my vehicle with OBDII code P0841?
It is not recommended to drive your vehicle with an active P0841 code, as it can cause further damage to the transmission. It is best to address the issue before continuing to drive the vehicle.
6. How can I repair OBDII code P0841?
Repairing P0841 may involve replacing the transmission fluid pressure sensor/switch, topping up or changing the transmission fluid, repairing or replacing damaged wiring, or reprogramming the transmission control module.
7. How much does it cost to fix OBDII code P0841?
The cost to fix P0841 can vary depending on the underlying cause of the code, the labor rates of the repair shop, and the cost of replacement parts. It is advisable to get a diagnostic assessment to determine the exact cost.
8. Can a DIY enthusiast fix OBDII code P0841?
While some DIY enthusiasts may have the skills to address P0841, it is recommended to consult a professional mechanic, especially when dealing with transmission-related issues to ensure proper diagnosis and repair.
9. Will resetting the Check Engine Light resolve OBDII code P0841?
Resetting the Check Engine Light may temporarily turn off the light, but it will not fix the underlying issue causing P0841. It is crucial to diagnose and repair the problem to prevent further damage.
10. How often does OBDII code P0841 occur in vehicles?
OBDII code P0841 is not as common as some other codes, but it can still occur in vehicles with automatic transmissions, especially in older vehicles or those with high mileage. Regular maintenance can help prevent this code from appearing.
Discuss the causes and fixes for P0841 OBDII Code
-
2007 Ford fusion. It has a rough idle but it goes away after a few min of just idleing. But when u start going down the road it kinda fills like the fuel is picking up Tash it doesn't jerk or anything thing but it fills like it's not getting enough gas then when you get over 55 it seems to quit. What could be my problem?
-
The P0841 code means that there is a problem with the Transmission Fluid Pressure Sensor. Problems with the Transmission Fluid Pressure Sensor wont's cause the rough idle problem, but could cause the lack of power symptoms. Do you have any other codes? when was the last time you service your vehicle? (spark plugs,transmission fluid, engine oil)
-
I just bought so I don't know the maintenance done on it I'm just trouble shooting it
-
i have codes p0732 (gear 2 incorrect ratio), p0734 (gear 4 incorrect ratio), p0744 (tcc ckt intermittent), p0757 (ssb stuck on), and p0841 (trans. fluid pressure sensor/switch A ckt range/perfermance. What are my best options, can my old transmission be fixed, or would i be best to buy a used transmission to replace the old one, really cant afford a new one at the moment, and i know im taking a change buying a used one so i really dont know what to do??
-
Hi Brandon,
I'm throwing the same codes - did you find out the cause?
Thanks,
Tina -
I have a 2011 Mazda3 i Touring that i just bought two weeks ago and an independent repair shop said that I have a P0841 code and that the exhaust flex pipe is leaking. Can the pipe leaking cause that code to show up? And the code is showing up without the check engine light being on. Could that be typical for the engine light not being on with that code?
-
The P0841 code is a transmission code, and the transmission should not be affected by the leaking exhaust pipe.
Some problems will set code after one occurrence and set the code and engine light the second time the problem happens.
If the engine light is not ON, then clear the code for now.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.