Check the 'Possible Causes' listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector pins.
The cost to diagnose the P0717 code is 1.0 hour of labor. The diagnosis time and labor rates at auto repair shops vary depending on the location, make and model of the vehicle, and even the engine type. Most auto repair shops charge between $75 and $150 per hour.
The Input Speed Sensor detects the primary pulley revolution speed and sends a signal to the Transmission. The Input Speed Sensor (ISS) is a hall-effect type sensor. The ISS mounts to the control valve upper body assembly and connects to the control solenoid (w/body and TCM) valve assembly through a wire harness and connector. The sensor faces the 1-2-3-4 and 3-5-R clutch housing machined teeth surface. The sensor receives 8.3-9.3 volts on the Input/Output Speed Sensor (ISS/OSS) supply voltage circuit from the Transmission Control Module (TCM). As the 1-2-3-4 and 3-5-R clutch housing rotates, the sensor produces a signal frequency based on the machined surface of the 1-2-3-4 and 3-5-R clutch housing. This signal is transmitted through the ISS signal circuit to the control solenoid (w/body and TCM) valve assembly. The control solenoid (w/body and TCM) valve assembly uses the ISS signal to determine line pressure, transmission shift patterns, Torque Converter Clutch (TCC) slip speed, and gear ratio. Control Module (TCM) and the Engine Control Module (ECM). The ECM sets the OBDII code when the Input Speed Sensor is out of factory specifications. The Diagnostic Trouble Code (DTC) P0717 is detected when TCM or ECM receives no signal from the sensor.
Need more information on how to fix the P0717 code? Get Access to Factory Service Manuals
Get the P0717 code diagnosed by a professional: Find a repair shop in your area