P1699 Code - Engine Torque Control Cut Signal Circuit High Input
Quick Answer
The P1699 code indicates a problem with the Engine Torque Control Cut Signal Circuit. Common causes include Faulty engine torque control sensor, Wiring or connection issues in the signal circuit, ECM software malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1699 indicates Engine Torque Control Cut Signal Circuit High Input.
- Common causes
- Common causes include Faulty engine torque control sensor, Wiring or connection issues in the signal circuit, ECM software malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1699 Description
The P1699 code indicates a problem with the Engine Torque Control Cut Signal Circuit. This circuit is responsible for communicating with the engine control module (ECM) to regulate the engine torque output. When the signal in this circuit is detected to be high, it means that there is an issue with the communication between the components involved in controlling the engine torque. This can lead to a variety of performance issues in the vehicle, affecting its drivability and overall efficiency.
Common Causes of P1699
- Faulty engine torque control sensor
- Wiring or connection issues in the signal circuit
- ECM software malfunction
- Engine control module (ECM) failure
- Electrical system issues affecting the signal circuit
Symptoms of P1699
- Rough idling or engine hesitation
- Decreased acceleration and power output
- Engine stalling or shutting off unexpectedly
- Check Engine Light illuminated on the dashboard
How to Fix P1699
- Begin by conducting a thorough inspection of the engine torque control system, including the sensor, wiring, and connections.
- Test the engine torque control sensor using a multimeter to check for proper voltage and resistance readings.
- Inspect the wiring harness for any signs of damage, corrosion, or loose connections. Repair or replace any damaged wiring.
- Clear the diagnostic trouble codes from the ECM and reset the system to see if the issue persists.
- If the problem persists, consider replacing the engine torque control sensor or the ECM, depending on the specific diagnosis.
Cost to Fix P1699
The cost of repairing a P1699 engine torque control cut signal circuit high input issue can vary depending on the specific cause of the problem and the parts needed for repair. On average, the cost can range from $200 to $500 for parts and labor. However, as mentioned earlier, labor rates at auto repair shops can vary, so it is recommended to inquire locally for a more accurate estimate.
Need more information about the P1699 code?
Need more information on how to fix the P1699 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1699 code diagnosed by a professional: Find a repair shop in your area
Code P1699 Information for Specific Makes
- P1699 Jaguar — CAN Link ECM / Climate Control Module
- P1699 Subaru — Engine Torque Control Cut Signal Circuit High Input
Frequently Asked Questions about P1699 Code
1. What are the common symptoms of OBDII code P1699?
- Common symptoms include engine performance issues, reduced power, and the vehicle going into limp mode.
2. What can cause the Engine Torque Control Cut Signal Circuit High Input code (P1699)?
- Possible causes include a faulty torque control cut signal circuit, damaged wiring, a defective torque control module, or a problem with the engine control module.
3. How serious is OBDII code P1699?
- This code should be addressed promptly as it can affect the engine's performance and may lead to further damage if left unresolved.
4. How can I diagnose the cause of P1699?
- Diagnosing P1699 typically involves using a scan tool to check for the code, inspecting the wiring and connectors related to the torque control system, and testing the torque control module.
5. Can I still drive my vehicle with OBDII code P1699?
- It is not recommended to drive the vehicle with this code present as it may lead to safety issues and further damage to the engine.
6. How can I repair OBDII code P1699?
- Repairing P1699 usually involves repairing or replacing damaged wiring, fixing any issues with the torque control module, or addressing problems with the engine control module.
7. Will resetting the trouble codes make OBDII code P1699 go away?
- Resetting the trouble codes may temporarily clear the code, but if the underlying issue is not fixed, the code is likely to return.
8. Can a DIY enthusiast fix OBDII code P1699?
- While some basic troubleshooting steps can be taken by DIY enthusiasts, diagnosing and repairing this code often requires advanced knowledge and specialized tools, making it best left to professional technicians.
9. Is there a recall related to OBDII code P1699?
- It is advisable to check with the vehicle manufacturer or a local dealership to inquire about any recalls related to OBDII code P1699 for your specific vehicle make and model.
10. How much does it cost to fix OBDII code P1699?
- The cost of fixing P1699 can vary depending on the underlying issue, parts needed for repair, and labor costs. It is recommended to obtain estimates from reputable auto repair shops.
Discuss the causes and fixes for P1699 OBDII Code
Code P1699 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.