Engine-Codes.com
Engine-Codes – Subaru – P1699 Subaru

P1699 Subaru Code - Engine Torque Control Cut Signal Circuit High Input

Quick Answer

The P1699 Subaru code indicates a problem with the engine torque control cut signal circuit, specifically a high input signal. Common causes include Faulty engine torque control cut signal circuit, Damaged wiring or connectors in the circuit, Malfunctioning engine control module (ECM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1699 Subaru indicates Engine Torque Control Cut Signal Circuit High Input.
Common causes
Common causes include Faulty engine torque control cut signal circuit, Damaged wiring or connectors in the circuit, Malfunctioning engine control module (ECM).
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 10, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P1699 Subaru Description

The P1699 Subaru code indicates a problem with the engine torque control cut signal circuit, specifically a high input signal. This code typically affects the vehicle's performance by causing issues with the engine's torque control system. The engine torque control system is responsible for managing the engine's power output to optimize performance, fuel efficiency, and emissions. When the engine torque control cut signal circuit has a high input, it means that the signal voltage is outside of the expected range, indicating a fault in the system.

OBDII Code P1699 Subaru - Engine Torque Control Cut Signal Circuit High Input
P1699 Subaru Code - Engine Torque Control Cut Signal Circuit High Input

Common Causes of P1699 Subaru

  1. Faulty engine torque control cut signal circuit
  2. Damaged wiring or connectors in the circuit
  3. Malfunctioning engine control module (ECM)
  4. Issues with related sensors, such as the throttle position sensor or crankshaft position sensor
  5. Electrical problems, such as a short circuit or corrosion in the wiring

Symptoms of P1699 Subaru

  1. Reduced engine power
  2. Poor acceleration
  3. Rough idling
  4. Stalling
  5. Hesitation during acceleration

How to Fix P1699 Subaru

  1. Diagnose the issue using a scan tool to identify the exact cause of the high input signal in the engine torque control cut circuit.
  2. Inspect the wiring and connectors in the circuit for any damage or corrosion. Repair or replace as needed.
  3. Test the engine control module (ECM) and related sensors for proper functioning. Replace any faulty components.
  4. Clear the diagnostic trouble codes and perform a test drive to ensure that the issue has been resolved.
  5. If the problem persists, further diagnosis may be needed to pinpoint the exact cause of the high input signal.

Cost to Fix P1699 Subaru

The typical repair costs for addressing a P1699 Subaru code can vary depending on the specific cause of the issue. In general, the parts and labor for this repair can range from $200 to $500. It's important to note that the actual cost may be higher or lower based on the location, vehicle make and model, and labor rates at the repair shop. It's recommended to consult with a professional mechanic for an accurate estimate tailored to your vehicle's needs.

Need more information about the P1699 Subaru code?

Need more information on how to fix the P1699 Subaru code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1699 Subaru code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1699 Subaru Code

1. What are the common symptoms of OBDII code P1699 in a Subaru related to the Engine Torque Control Cut Signal Circuit High Input?

The common symptoms include engine stalling, loss of power, rough idling, and in some cases, the vehicle may go into limp mode.

2. What are the potential causes of OBDII code P1699 in a Subaru?

Possible causes of this code may include a faulty engine torque control cut signal circuit, damaged wiring harness, loose connectors, or a problem with the engine control module (ECM).

3. How can I diagnose the OBDII code P1699 in my Subaru?

Diagnosing this code involves using a professional OBDII scanner to read the fault codes, checking the wiring and connectors related to the engine torque control system, and conducting a thorough inspection of the engine control module.

4. Is it safe to continue driving my Subaru with the OBDII code P1699 present?

It is not recommended to drive your vehicle with this code present, as it can lead to potential drivability issues and further damage to engine components. It is best to address the issue promptly.

5. Can I repair OBDII code P1699 in my Subaru by myself?

While some DIY enthusiasts may attempt to diagnose and repair this code, it is recommended to seek professional help, especially when dealing with intricate engine control systems to ensure proper repair and prevent further damage.

6. How much does it typically cost to repair OBDII code P1699 in a Subaru?

The cost of repairing this code can vary depending on the root cause of the issue. It may range from a simple wiring repair cost to a more expensive ECM replacement if necessary.

7. Are there any preventive maintenance tips to avoid OBDII code P1699 in a Subaru?

Regularly servicing your vehicle, checking for loose or damaged wiring in the engine bay, and using high-quality fuel and engine oil can help prevent issues leading to this code.

8. Can a bad sensor trigger the OBDII code P1699 in a Subaru?

While a faulty sensor related to the engine torque control system can potentially trigger this code, it is more commonly associated with wiring issues or ECM malfunctions.

9. Will resetting the OBDII code P1699 clear the issue permanently?

Simply resetting the code without addressing the underlying cause will not fix the issue permanently. It is essential to diagnose and repair the root cause to prevent the code from reoccurring.

10. How long does it typically take to repair OBDII code P1699 in a Subaru?

The repair time for this code can vary depending on the complexity of the issue. It may take anywhere from a few hours to a full day, depending on the diagnosis and repair process needed to resolve the problem effectively.

Discuss the causes and fixes for P1699 Subaru OBDII Code

Submit a New Comment

Code P1699 Subaru comments

No comments found for this page.