P1460 FORD - Wide Open Throttle Air Conditioning Cutoff Circuit Malfunction
P1460 FORD Possible Causes
- Faulty Wide Open Throttle A/C Cutoff (WAC) Relay
- WAC Relay harness is open or shorted
- WAC Relay circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
First diagnose P1460 FORD code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.
Cost of diagnosing the P1460 FORD code
Labor: 1.0The cost of diagnosing the P1460 FORD code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
When is the P1460 FORD code detected?The Engine Control Module (ECM) did not detect voltage on the relay circuit when voltage was expected
P1460 FORD Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1460 FORD MeaningMonitors the A/CCR circuit output from the Powertrain Control Module (PCM). The test fails when the PCM grounds the A/CCR circuit, excessive current draw is detected on the A/CCR circuit; or, with the A/CCR circuit not grounded by the PCM, voltage is not detected on the A/CCR circuit (the PCM expects to detect VPWR voltage coming through the A/CCR relay coil to the A/CCR circuit).
P1460 FORD More InformationNeed more information on how to fix the P1460 FORD code?
Get Access to Factory Service Manuals
P1460 FORD Information for specific Ford models
- P1460 1997 FORD F150
- P1460 1998 FORD F150
- P1460 1999 FORD F150
- P1460 2000 FORD F150
- P1460 2001 FORD F150
- P1460 2002 FORD F150
- P1460 2003 FORD F150
- P1460 2006 FORD FUSION
- P1460 2007 FORD FUSION
- P1460 2008 FORD FUSION
- P1460 2009 FORD FUSION
- P1460 2010 FORD FUSION
- P1460 2011 FORD FUSION
- P1460 2012 FORD FUSION