Engine-Codes.com
Engine-Codes – Generic – P100E

P100E Code - Accelerator Pedal Position Signal Message Counter Incorrect

Quick Answer

The diagnostic trouble code P100E indicates that the Accelerator Pedal Position Signal Message Counter is incorrect. Common causes include Faulty accelerator pedal position sensor, Wiring or connector issues in the accelerator pedal position sensor circuit, ECM software or hardware malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P100E indicates Accelerator Pedal Position Signal Message Counter Incorrect.
Common causes
Common causes include Faulty accelerator pedal position sensor, Wiring or connector issues in the accelerator pedal position sensor circuit, ECM software or hardware malfunction.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 08, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P100E Description

The diagnostic trouble code P100E indicates that the Accelerator Pedal Position Signal Message Counter is incorrect. This means that the vehicle's onboard computer is not receiving the correct number of signals from the accelerator pedal position sensor. The accelerator pedal position sensor is a crucial component that informs the engine control module (ECM) about the position of the accelerator pedal, allowing the ECM to adjust the fuel injection and ignition timing accordingly.

OBDII Code P100E - Accelerator Pedal Position Signal Message Counter Incorrect
P100E Code - Accelerator Pedal Position Signal Message Counter Incorrect

Common Causes of P100E

  1. Faulty accelerator pedal position sensor.
  2. Wiring or connector issues in the accelerator pedal position sensor circuit.
  3. ECM software or hardware malfunction.
  4. Throttle body issues.
  5. Electronic throttle control system faults.

Symptoms of P100E

  1. Hesitation or lack of response when pressing the accelerator pedal.
  2. Rough idling or stalling when coming to a stop.
  3. Reduced fuel efficiency.
  4. Engine misfires.
  5. Check Engine Light illuminated on the dashboard.

How to Fix P100E

  1. Begin by verifying the code using an OBD-II scanner and checking for any other related trouble codes.
  2. Inspect the accelerator pedal position sensor and its wiring for any visible damage or corrosion.
  3. Test the sensor's output using a multimeter to ensure it is sending the correct signals to the ECM.
  4. If necessary, replace the accelerator pedal position sensor and clear the trouble code from the ECM.
  5. Perform a throttle body cleaning and reset the ECM to ensure proper functioning of the electronic throttle control system.

Cost to Fix P100E

The cost of repairing a P100E code can vary depending on the root cause of the issue. The price of a new accelerator pedal position sensor typically ranges from $50 to $200, while the labor cost for the repair can range from $100 to $300. Overall, the total cost of repairing a P100E code could range from $150 to $500, including parts and labor. It's important to note that these are rough estimates, and actual costs may vary based on factors such as the vehicle make and model, location, and the specific diagnosis and repair process required. It's recommended to consult with a qualified mechanic for a more accurate cost estimate.

Need more information about the P100E code?

Need more information on how to fix the P100E code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P100E code diagnosed by a professional: Find a repair shop in your area

Code P100E Information for Specific Makes

  • P100E Buick — Accelerator Pedal Position Signal Message Counter Incorrect
  • P100E Cadillac — Accelerator Pedal Position Signal Message Counter Incorrect
  • P100E Chevrolet — Accelerator Pedal Position Signal Message Counter Incorrect
  • P100E GMC — Accelerator Pedal Position Signal Message Counter Incorrect
About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P100E Code

1. What are the common symptoms of OBDII code P100E (Accelerator Pedal Position Signal Message Counter Incorrect)?

The common symptoms of code P100E may include reduced engine performance, poor acceleration, and the illumination of the Check Engine Light.

2. What can cause the OBDII code P100E to be triggered?

The code P100E is typically triggered by a faulty accelerator pedal position sensor, damaged wiring or connectors in the pedal position sensor circuit, or a communication error between the sensor and the engine control module.

3. How can I diagnose the OBDII code P100E?

Diagnosing code P100E usually involves using a diagnostic scanner to read the code, checking the accelerator pedal position sensor for proper operation, inspecting the wiring and connectors for damage, and ensuring there are no communication issues between the sensor and the engine control module.

4. Can I continue driving my vehicle with the OBDII code P100E present?

It is not recommended to continue driving your vehicle with the code P100E present, as it can lead to further engine performance issues and potential safety concerns. It is best to address the issue promptly.

5. What is the typical repair for OBDII code P100E?

The typical repair for code P100E involves replacing the faulty accelerator pedal position sensor, repairing any damaged wiring or connectors, and clearing the code from the engine control module.

6. Are there any DIY tips for fixing the OBDII code P100E?

While it is possible to replace the accelerator pedal position sensor yourself, it is recommended to have the repair done by a qualified mechanic to ensure proper diagnosis and repair of the underlying issue.

7. How much does it cost to fix the OBDII code P100E?

The cost of fixing code P100E can vary depending on the extent of the issue and the labor rates in your area. Typically, the cost of parts and labor for replacing the accelerator pedal position sensor ranges from $150 to $300.

8. Will resetting the Check Engine Light resolve the OBDII code P100E?

Simply resetting the Check Engine Light will not fix the underlying issue causing code P100E. It is important to diagnose the problem, make the necessary repairs, and clear the code from the engine control module to resolve the issue.

9. How soon should I address the OBDII code P100E once it appears?

It is recommended to address the OBDII code P100E as soon as possible to prevent further engine performance issues and potential safety concerns while driving.

10. Can a malfunctioning accelerator pedal position sensor cause other problems in the vehicle?

Yes, a malfunctioning accelerator pedal position sensor can cause other issues such as poor fuel efficiency, rough idling, and difficulty starting the engine. It is important to address the problem promptly to avoid further complications.

Discuss the causes and fixes for P100E OBDII Code

Submit a New Comment

Code P100E comments

No comments found for this page.