P0980 Chevrolet Code - Shift Solenoid Valve 3 Control Circuit High Voltage
Quick Answer
The P0980 code in a Chevrolet vehicle indicates a problem with the Shift Solenoid Valve 3 Control Circuit, specifically high voltage. Common causes include Faulty Shift Solenoid Valve 3, Damaged wiring or connectors in the control circuit, Short circuit in the electrical system. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0980 Chevrolet indicates Shift Solenoid Valve 3 Control Circuit High Voltage.
- Common causes
- Common causes include Faulty Shift Solenoid Valve 3, Damaged wiring or connectors in the control circuit, Short circuit in the electrical system.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0980 Chevrolet Description
The P0980 code in a Chevrolet vehicle indicates a problem with the Shift Solenoid Valve 3 Control Circuit, specifically high voltage. The shift solenoid valve is responsible for controlling the flow of transmission fluid in the transmission system, helping to regulate gear changes. When the control circuit shows high voltage, it means that there is an issue with the electrical signal being sent to the solenoid, which can lead to improper gear shifting or even the inability to shift gears at all.
Common Causes of P0980 Chevrolet
- Faulty Shift Solenoid Valve 3
- Damaged wiring or connectors in the control circuit
- Short circuit in the electrical system
- Malfunctioning Engine Control Module (ECM)
- Fluid contamination in the transmission system
Symptoms of P0980 Chevrolet
- Harsh or delayed shifting
- Inability to shift gears
- Transmission slippage
- Illuminated Check Engine Light
- Decreased fuel efficiency
How to Fix P0980 Chevrolet
- Begin by conducting a thorough inspection of the shift solenoid valve 3, wiring, and connectors to check for any visible damage or loose connections.
- Use a multimeter to test the electrical signal and voltage in the control circuit to identify any irregularities.
- If the shift solenoid valve is faulty, replace it with a new one following manufacturer specifications.
- Repair or replace any damaged wiring or connectors in the control circuit to ensure proper electrical connection.
- Clear the diagnostic trouble codes from the vehicle's ECM and test drive the vehicle to ensure that the issue has been resolved.
Cost to Fix P0980 Chevrolet
The typical repair costs for addressing a P0980 code in a Chevrolet vehicle can range from $200 to $500, including parts and labor. However, it's important to note that prices may vary depending on the location, vehicle make and model, and the specific underlying cause of the issue. Additionally, diagnostic time and labor rates at auto repair shops can vary, with hourly rates typically falling between $80 and $150. It's advisable to consult with a trusted mechanic or repair shop to get an accurate estimate for this repair.
Need more information about the P0980 Chevrolet code?
Need more information on how to fix the P0980 Chevrolet code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0980 Chevrolet code diagnosed by a professional: Find a repair shop in your area
Information for Specific Chevrolet Models
- P0980 2014 Chevrolet Silverado — Shift Solenoid Valve 3 Control Circuit High Voltage
- P0980 2015 Chevrolet Silverado — Shift Solenoid Valve 3 Control Circuit High Voltage
- P0980 2016 Chevrolet Silverado — Shift Solenoid Valve 3 Control Circuit High Voltage
- P0980 2017 Chevrolet Silverado — Shift Solenoid Valve 3 Control Circuit High Voltage
- P0980 2018 Chevrolet Silverado — Shift Solenoid Valve 3 Control Circuit High Voltage
Frequently Asked Questions about P0980 Chevrolet Code
1. What are the common symptoms of OBDII code P0980 in a Chevrolet related to the Shift Solenoid Valve 3 Control Circuit High Voltage?
The common symptoms include harsh shifting, transmission slippage, difficulty shifting gears, and the transmission going into limp mode.
2. What are some possible causes of OBDII code P0980 in a Chevrolet?
Possible causes include a faulty shift solenoid valve 3, damaged wiring or connectors in the circuit, low transmission fluid levels, or a defective transmission control module.
3. How can I diagnose the Shift Solenoid Valve 3 Control Circuit High Voltage issue in my Chevrolet triggering code P0980?
Diagnosis involves checking the shift solenoid valve 3 for proper operation, inspecting the wiring and connectors for any damage or corrosion, testing the transmission fluid level and condition, and scanning the transmission control module for fault codes.
4. Can I continue driving my Chevrolet with OBDII code P0980 present?
It is not recommended to continue driving with this code present, as it can lead to further damage to the transmission and result in more costly repairs.
5. How can I repair OBDII code P0980 related to the Shift Solenoid Valve 3 Control Circuit High Voltage in my Chevrolet?
Repair options include replacing the faulty shift solenoid valve 3, repairing any damaged wiring or connectors, ensuring proper transmission fluid levels, and resetting the fault code with a scanner.
6. Is it possible to reset OBDII code P0980 in a Chevrolet without fixing the underlying issue?
While you can clear the code temporarily, it will likely return if the root cause of the Shift Solenoid Valve 3 Control Circuit High Voltage issue is not addressed.
7. How much does it typically cost to repair OBDII code P0980 in a Chevrolet at a professional mechanic?
The cost of repairs can vary depending on the exact cause of the issue, but it can range from $200 to $600 or more, including parts and labor.
8. Can a DIY enthusiast with moderate mechanical skills fix OBDII code P0980 in a Chevrolet?
Yes, replacing the shift solenoid valve 3 or repairing wiring issues can be tackled by a DIY enthusiast with the necessary tools and knowledge, but it's important to ensure the repairs are done correctly to avoid further complications.
9. Are there any preventive maintenance measures to avoid triggering OBDII code P0980 in a Chevrolet in the future?
Regularly checking and maintaining proper transmission fluid levels, addressing any transmission-related symptoms promptly, and servicing the transmission at recommended intervals can help prevent issues leading to code P0980.
10. Will fixing OBDII code P0980 in my Chevrolet improve the overall performance and efficiency of the transmission?
Yes, resolving the Shift Solenoid Valve 3 Control Circuit High Voltage issue indicated by code P0980 can help restore smooth shifting, improve transmission performance, and potentially enhance fuel efficiency in your Chevrolet.
Discuss the causes and fixes for P0980 Chevrolet OBDII Code
Code P0980 Chevrolet comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.