P0980 2014 Chevrolet Silverado Code - Shift Solenoid Valve 3 Control Circuit High Voltage
Quick Answer
The P0980 diagnostic trouble code (DTC) for a 2014 Chevrolet Silverado indicates a problem with the Shift Solenoid Valve 3 Control Circuit having high voltage. Common causes include Faulty Shift Solenoid Valve 3, Damaged wiring or connectors in the control circuit, Poor connection to the transmission control module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0980 2014 Chevrolet Silverado indicates Shift Solenoid Valve 3 Control Circuit High Voltage.
- Common causes
- Common causes include Faulty Shift Solenoid Valve 3, Damaged wiring or connectors in the control circuit, Poor connection to the transmission control module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0980 2014 Chevrolet Silverado Description
The P0980 diagnostic trouble code (DTC) for a 2014 Chevrolet Silverado indicates a problem with the Shift Solenoid Valve 3 Control Circuit having high voltage. The shift solenoid valve is a crucial component of the transmission system that controls the flow of transmission fluid to engage or disengage gears. In this case, a high voltage in the control circuit of Shift Solenoid Valve 3 suggests an electrical issue that could prevent the solenoid from functioning properly.
Common Causes of P0980 2014 Chevrolet Silverado
- Faulty Shift Solenoid Valve 3
- Damaged wiring or connectors in the control circuit
- Poor connection to the transmission control module
- Issues with the transmission control module
- Electrical issues such as a short circuit or high resistance in the circuit
Symptoms of P0980 2014 Chevrolet Silverado
- Harsh or delayed shifting
- Slipping gears
- Stuck in a specific gear
- Poor acceleration
- Reduced fuel efficiency
How to Fix P0980 2014 Chevrolet Silverado
- Diagnose the specific cause of the high voltage in the Shift Solenoid Valve 3 control circuit using a scan tool to pinpoint the exact issue.
- Inspect the wiring and connectors for any damage or corrosion, repairing or replacing as necessary.
- Test the Shift Solenoid Valve 3 for proper operation and replace if found to be faulty.
- Check the transmission control module for any faults or errors, resetting or replacing it if needed.
- Clear the DTC and test drive the vehicle to ensure the transmission shifts smoothly and efficiently.
Cost to Fix P0980 2014 Chevrolet Silverado
The typical repair costs for addressing a P0980 code on a 2014 Chevrolet Silverado can range from $200 to $500, including parts and labor. However, it's important to note that specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Most auto repair shops charge between $80 and $150 per hour for labor, but rates may be higher in metropolitan areas or at dealerships, while independent shops may offer lower rates. For a more accurate estimate, it's recommended to inquire about local rates before proceeding with the repair.
Need more information about the P0980 2014 Chevrolet Silverado code?
Need more information on how to fix the P0980 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0980 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0980 2014 Chevrolet Silverado Code
1. What does the OBDII code P0980 mean on a 2014 Chevrolet Silverado?
It indicates a high voltage issue in the Shift Solenoid Valve 3 Control Circuit, affecting the transmission's operation.
2. What are the common symptoms of the P0980 code in a 2014 Silverado?
Symptoms include harsh or delayed shifting, transmission stuck in one gear, or the check engine light being on.
3. What causes the P0980 code to appear?
Common causes include faulty shift solenoid, damaged wiring or connectors in the circuit, or a malfunctioning transmission control module (TCM).
4. Can I drive my 2014 Silverado with the P0980 code?
Driving is possible, but it’s not recommended because further damage to the transmission may occur if the issue isn’t addressed.
5. How do I diagnose the P0980 code on my Silverado?
Start by inspecting the wiring and connectors for damage, test the shift solenoid, and check for proper voltage at the TCM.
6. How can the P0980 code be fixed?
Repairs may involve replacing the faulty shift solenoid, repairing damaged wiring, or reprogramming or replacing the TCM.
7. How much does it cost to repair the P0980 code on a 2014 Silverado?
Costs vary but typically range from $150 to $400 for solenoid replacement, with additional costs for wiring or TCM issues.
8. Can a low transmission fluid level cause the P0980 code?
Indirectly, yes. Low fluid can affect solenoid performance, so it’s essential to check and maintain the proper fluid level.
9. Will clearing the P0980 code fix the issue permanently?
No, clearing the code only removes it temporarily. The underlying issue must be repaired to avoid the code reappearing.
10. Do I need a professional mechanic to fix the P0980 code?
While basic inspections can be done at home, diagnosing and repairing electrical or TCM issues often requires professional expertise.
Discuss the causes and fixes for P0980 2014 Chevrolet Silverado OBDII Code
Code P0980 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.