P0228 Code - Throttle/Pedal Position Sensor/Switch 'C' Circuit High Input
Quick Answer
The diagnostic trouble code P0228 indicates that the Engine Control Module (ECM) has detected a high input signal from the throttle/pedal position sensor or switch 'C'. Common causes include Faulty throttle/pedal position sensor or switch 'C', Damaged wiring or connectors in the sensor circuit, Corrosion or contamination in the sensor connections. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0228 indicates Throttle/Pedal Position Sensor/Switch 'C' Circuit High Input.
- Common causes
- Common causes include Faulty throttle/pedal position sensor or switch 'C', Damaged wiring or connectors in the sensor circuit, Corrosion or contamination in the sensor connections.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0228 Description
The diagnostic trouble code P0228 indicates that the Engine Control Module (ECM) has detected a high input signal from the throttle/pedal position sensor or switch 'C'. This sensor is responsible for monitoring the position of the throttle pedal and transmitting this information to the ECM, which uses it to adjust the air-fuel mixture and control the vehicle's acceleration. A high input signal suggests that the voltage level from the sensor is outside the expected range, potentially leading to incorrect fuel delivery and throttle response.
Common Causes of P0228
- Faulty throttle/pedal position sensor or switch 'C'
- Damaged wiring or connectors in the sensor circuit
- Corrosion or contamination in the sensor connections
- Malfunctioning ECM
- Electrical issues such as short circuits or open circuits
Symptoms of P0228
- Reduced engine power
- Acceleration hesitation
- Illuminated Check Engine Light
- Limp mode activation
- Poor fuel efficiency
How to Fix P0228
- Begin by performing a thorough inspection of the throttle/pedal position sensor and switch 'C', checking for any visible damage or contamination.
- Test the sensor's voltage output using a multimeter to determine if it is within the specified range. Replace the sensor if it is found to be faulty.
- Inspect the wiring and connectors in the sensor circuit for any signs of damage, corrosion, or loose connections. Repair or replace as needed.
- Clear the diagnostic trouble codes from the ECM using a scan tool and test drive the vehicle to ensure the issue has been resolved.
- If the problem persists, consult a professional mechanic or dealership for further diagnosis and potential ECM replacement.
Cost to Fix P0228
The typical repair costs for addressing a P0228 code can range from $100 to $300, depending on the specific cause of the issue and the parts that need to be replaced. This estimate includes the cost of a new throttle/pedal position sensor, wiring repairs, and labor fees. It is important to note that the actual cost may vary based on the location, vehicle make and model, and other factors. Diagnosing and repairing this issue should be done by a qualified mechanic to ensure the correct resolution and prevent further complications.
When is the Code Detected?
Need more information about the P0228 code?
Need more information on how to fix the P0228 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0228 code diagnosed by a professional: Find a repair shop in your area
Code P0228 Information for Specific Makes
- P0228 Ford — Throttle/Pedal Position Sensor/Switch 'C' Circuit High Input
- P0228 Infiniti — Throttle Position Sensor 2 Circuit High Input
- P0228 Mercedes-Benz — Throttle/Pedal Position Sensor/Switch 'C' Circuit High Input
- P0228 Nissan — Throttle Position Sensor 2 Circuit High Input Bank 2
- P0228 Volkswagen — Throttle Pedal Position Sensor/Switch 'C' Circuit High
Frequently Asked Questions about P0228 Code
1. What are the common symptoms of OBDII code P0228?
- Common symptoms include a decrease in engine power, throttle response issues, and the illumination of the Check Engine Light.
2. What are the possible causes of OBDII code P0228?
- The code P0228 can be caused by a faulty throttle position sensor, damaged wiring or connectors in the throttle pedal circuit, or a problem with the electronic throttle control system.
3. How serious is OBDII code P0228?
- While the vehicle may still be operable with code P0228, it is important to address the issue promptly to prevent potential safety hazards and further damage to the engine.
4. Can I continue driving with OBDII code P0228 present?
- It is not recommended to continue driving with code P0228 present, as it can lead to poor engine performance and potentially unsafe driving conditions.
5. How is OBDII code P0228 diagnosed?
- The code P0228 is diagnosed using an OBDII scanner to retrieve the fault code, followed by a thorough inspection of the throttle position sensor, pedal circuit, and related components.
6. Is it possible to reset OBDII code P0228 on my own?
- While it is possible to clear the code temporarily with an OBDII scanner, the underlying issue causing code P0228 must be identified and resolved to prevent it from reoccurring.
7. What are some repair tips for fixing OBDII code P0228?
- Repair tips include checking and cleaning the throttle position sensor, inspecting the wiring and connectors for damage, and ensuring proper connection in the throttle pedal circuit.
8. Can a DIY enthusiast fix OBDII code P0228 themselves?
- DIY enthusiasts with knowledge of automotive repair and access to the necessary tools may be able to diagnose and fix OBDII code P0228, but professional help is recommended for complex issues.
9. How much does it typically cost to repair OBDII code P0228?
- The cost of repairing code P0228 can vary depending on the underlying cause, but it may range from $100 to $300 for parts and labor at a repair shop.
10. How can I prevent OBDII code P0228 from occurring in the future?
- Preventive measures include regular maintenance of the throttle system, avoiding harsh driving habits, and addressing any issues with the throttle position sensor promptly.
Discuss the causes and fixes for P0228 OBDII Code
Code P0228 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.