P0228 Mercedes-Benz Code - Throttle/Pedal Position Sensor/Switch 'C' Circuit High Input
Quick Answer
The P0228 diagnostic trouble code (DTC) for Mercedes-Benz indicates an issue with the Throttle/Pedal Position Sensor/Switch 'C' Circuit having a high input. Common causes include Faulty throttle position sensor, Damaged or corroded wiring harness connected to the sensor, Issues with the ECM receiving incorrect voltage signals. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0228 Mercedes-Benz indicates Throttle/Pedal Position Sensor/Switch 'C' Circuit High Input.
- Common causes
- Common causes include Faulty throttle position sensor, Damaged or corroded wiring harness connected to the sensor, Issues with the ECM receiving incorrect voltage signals.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0228 Mercedes-Benz Description
The P0228 diagnostic trouble code (DTC) for Mercedes-Benz indicates an issue with the Throttle/Pedal Position Sensor/Switch 'C' Circuit having a high input. The throttle position sensor (TPS) is a crucial component in the vehicle's electronic control system, as it helps regulate the throttle's opening and closing based on the driver's input. The 'C' circuit refers to a specific circuit within the sensor system, and a high input means that the voltage signal being transmitted is higher than the expected range.
Common Causes of P0228 Mercedes-Benz
- Faulty throttle position sensor
- Damaged or corroded wiring harness connected to the sensor
- Issues with the ECM receiving incorrect voltage signals
- Water or debris entering the sensor causing a malfunction
Symptoms of P0228 Mercedes-Benz
- Hesitation or lack of response when pressing the accelerator pedal
- Engine surging or fluctuating idle speed
- Difficulty maintaining speed or erratic shifting from the transmission
- Check Engine Light illuminated on the dashboard
How to Fix P0228 Mercedes-Benz
- Begin by diagnosing the issue using a scan tool to confirm the P0228 code and identify the specific cause.
- Inspect the throttle position sensor and its wiring for any visible damage or corrosion. Replace the sensor if necessary.
- Test the voltage signals from the sensor to the ECM to ensure they are within the proper range.
- Clear the DTC from the ECM's memory and reset the system to see if the code reappears.
- If the issue persists, consider seeking professional help from a certified mechanic or dealership to further diagnose and repair the problem.
Cost to Fix P0228 Mercedes-Benz
The typical repair costs for addressing a P0228 code on a Mercedes-Benz can range from $200 to $500, depending on the specific cause of the issue and the cost of parts and labor. It's important to note that the diagnosis time and labor rates at auto repair shops can vary significantly based on factors such as location, vehicle make and model, and engine type. It's advisable to consult with local auto repair shops to get a more accurate estimate for resolving this issue.
When is the Code Detected?
Need more information about the P0228 Mercedes-Benz code?
Need more information on how to fix the P0228 Mercedes-Benz code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0228 Mercedes-Benz code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0228 Mercedes-Benz Code
1. What are the common symptoms of OBDII code P0228 in a Mercedes-Benz?
- Common symptoms include reduced engine power, hesitation during acceleration, and the vehicle going into limp mode.
2. What causes the Throttle/Pedal Position Sensor/Switch 'C' Circuit High Input code in a Mercedes-Benz?
- This code is typically triggered by a faulty throttle position sensor, damaged wiring harness, or a problem with the throttle body.
3. How can I diagnose the cause of OBDII code P0228 in my Mercedes-Benz?
- You can use a diagnostic scan tool to read the code and then perform a visual inspection of the throttle position sensor and its wiring for any visible damage.
4. Can a dirty throttle body cause code P0228 in a Mercedes-Benz?
- Yes, a dirty or carbon-fouled throttle body can disrupt the sensor's readings and lead to a high input signal, triggering the P0228 code.
5. What is the recommended repair for OBDII code P0228 in a Mercedes-Benz?
- The recommended repair is to replace the throttle position sensor and address any wiring issues. Cleaning or replacing the throttle body may also be necessary.
6. Are there any DIY tips for fixing code P0228 in a Mercedes-Benz?
- DIY enthusiasts can attempt to clean the throttle body and sensor connectors, but for proper diagnosis and repair, it's recommended to seek professional help.
7. Can driving with OBDII code P0228 in a Mercedes-Benz cause further damage?
- Continuing to drive with this code may result in poor engine performance, reduced fuel efficiency, and potential damage to other engine components over time.
8. How much does it typically cost to repair OBDII code P0228 in a Mercedes-Benz?
- The cost of repairing this code can vary depending on the extent of the damage and the specific parts that need to be replaced, but it can range from $200 to $500.
9. Is it safe to drive my Mercedes-Benz with the Throttle/Pedal Position Sensor/Switch 'C' Circuit High Input code?
- It is not recommended to drive the vehicle with this code present, as it can lead to unsafe driving conditions and potential engine issues.
10. Can a Mercedes-Benz dealership fix OBDII code P0228?
- Yes, a Mercedes-Benz dealership or a qualified mechanic with expertise in Mercedes-Benz vehicles can diagnose and repair OBDII code P0228 effectively.
Discuss the causes and fixes for P0228 Mercedes-Benz OBDII Code
Code P0228 Mercedes-Benz comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.