Engine-CodesGeneric – P0137

P0137 Code - O2 Sensor Circuit Low Voltage Bank 1 Sensor 2

Quick Answer

The P0137 code indicates a problem with the O2 (oxygen) sensor circuit, specifically a low voltage reading from Bank 1 Sensor 2. Common causes include Faulty O2 sensor, Damaged wiring or connectors, Exhaust leaks near the sensor. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0137 indicates O2 Sensor Circuit Low Voltage Bank 1 Sensor 2.
Common causes
Common causes include Faulty O2 sensor, Damaged wiring or connectors, Exhaust leaks near the sensor.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Table of contents Created and updated by William Orellana on Sep 07, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P0137 Description

The P0137 code indicates a problem with the O2 (oxygen) sensor circuit, specifically a low voltage reading from Bank 1 Sensor 2. This sensor is responsible for monitoring the oxygen content in the exhaust gases after they have passed through the catalytic converter. The O2 sensor helps the engine control module (ECM) adjust the air-fuel mixture to optimize combustion and reduce emissions.

OBDII Code P0137 - O2 Sensor Circuit Low Voltage Bank 1 Sensor 2
P0137 Code - O2 Sensor Circuit Low Voltage Bank 1 Sensor 2

Common Causes of P0137

  1. Faulty O2 sensor
  2. Damaged wiring or connectors
  3. Exhaust leaks near the sensor
  4. ECM issues
  5. Contaminated sensor due to oil or coolant leaks

Symptoms of P0137

  1. Decreased fuel efficiency
  2. Rough idling or stalling
  3. Poor acceleration
  4. Check Engine Light illuminated
  5. Increased emissions

How to Fix P0137

  1. Use an OBD-II scanner to confirm the P0137 code and diagnose the specific issue.
  2. Inspect the wiring and connectors for any damage or corrosion. Repair or replace as needed.
  3. Check for exhaust leaks near the sensor and repair them.
  4. Test the O2 sensor using a multimeter to determine if it is functioning properly. Replace if necessary.
  5. Clear the code from the ECM's memory and test drive the vehicle to ensure the issue is resolved.

Cost to Fix P0137

The cost of repairing a P0137 code can vary depending on the specific cause of the issue. On average, replacing an O2 sensor can cost between $100 and $200 for the part, with additional labor costs ranging from $50 to $100. If wiring or connectors need to be replaced, the total cost may increase. It's essential to factor in diagnostic time and labor rates, which can vary based on factors such as location and the type of repair facility.

Tech Notes for P0137

Replacing the Rear Heated Oxygen Sensor Bank 1 usually takes care of the problem.









User Submitted Video

Need more information about the P0137 code?

Need more information on how to fix the P0137 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0137 code diagnosed by a professional: Find a repair shop in your area

Code P0137 Information for Specific Makes

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0137 Code

1. What are the common symptoms of OBDII code P0137?

- Common symptoms of P0137 include poor fuel efficiency, rough idling, and potential stalling of the vehicle.

2. What causes the O2 Sensor Circuit Low Voltage Bank 1 Sensor 2 code (P0137)?

- The most common causes of P0137 are a faulty oxygen sensor, damaged wiring or connectors, exhaust leaks, or issues with the engine's computer system.

3. How can I diagnose the OBDII code P0137?

- To diagnose P0137, you can use an OBDII scanner to read the code, then inspect the oxygen sensor and its wiring for any visible damage or issues.

4. Can a bad oxygen sensor cause code P0137?

- Yes, a malfunctioning or faulty oxygen sensor is a common cause of the P0137 code, as it can lead to inaccurate readings and trigger the low voltage error.

5. How do I repair O2 Sensor Circuit Low Voltage Bank 1 Sensor 2 code (P0137)?

- Repairing P0137 usually involves replacing the oxygen sensor, checking and repairing any damaged wiring or connectors, and clearing the code with an OBDII scanner.

6. Is it safe to drive with OBDII code P0137 active?

- It is generally not recommended to drive with code P0137 active, as it can lead to poor engine performance and potential damage if left unresolved.

7. Can a simple reset of the OBDII system fix code P0137?

- A simple reset may temporarily clear the code, but if the underlying issue causing P0137 is not addressed, the code is likely to return.

8. How much does it usually cost to repair the P0137 code?

- The cost of repairing P0137 can vary depending on the underlying issue, but it typically ranges from $100 to $300 for parts and labor.

9. How long does it take to fix O2 Sensor Circuit Low Voltage Bank 1 Sensor 2 code (P0137)?

- The repair time for P0137 can vary based on the specific issue, but it usually takes around 1-2 hours for a professional mechanic to diagnose and fix the problem.

10. Can I prevent OBDII code P0137 from occurring?

- Regular maintenance of your vehicle, including checking and replacing oxygen sensors as recommended, can help prevent code P0137 from occurring.

Discuss the causes and fixes for P0137 OBDII Code

  • replaced the S1 downstream 02 sensor but did not fix the issue jeep liberty 2005 3.7 Liter engine
    spent 90 to put the sensor in and 79 for the sensor P0137 popped back up after 4 days

  • Almost all the time the solution to repair the P0137 code is a new O2 Sensor. Is there any intake or exhaust leaks near the sensor? if there are no leaks, then you probably have a damage sensor.