P0137 Chrysler Code - O2 Sensor Circuit Low Voltage Bank 1 Sensor 2
Quick Answer
The P0137 code for Chrysler vehicles indicates a problem with the O2 sensor circuit for Bank 1 Sensor 2, specifically detecting low voltage. Common causes include Faulty O2 sensor, Damaged wiring or connectors in the O2 sensor circuit, Exhaust leaks near the sensor. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0137 Chrysler indicates O2 Sensor Circuit Low Voltage Bank 1 Sensor 2.
- Common causes
- Common causes include Faulty O2 sensor, Damaged wiring or connectors in the O2 sensor circuit, Exhaust leaks near the sensor.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0137 Chrysler Description
The P0137 code for Chrysler vehicles indicates a problem with the O2 sensor circuit for Bank 1 Sensor 2, specifically detecting low voltage. The O2 sensor is responsible for monitoring the oxygen content in the exhaust gases and providing feedback to the engine control module (ECM) to adjust the air-fuel mixture for optimal combustion. When the voltage from the O2 sensor is too low, it can lead to incorrect fuel trim adjustments, reduced fuel efficiency, increased emissions, and potential damage to the catalytic converter.
Common Causes of P0137 Chrysler
- Faulty O2 sensor
- Damaged wiring or connectors in the O2 sensor circuit
- Exhaust leaks near the sensor
- Engine running rich or lean due to other issues
- ECM or PCM malfunction
Symptoms of P0137 Chrysler
- Decreased fuel efficiency
- Rough idling or stalling
- Engine misfires
- Increased emissions
- Check Engine Light illuminated
How to Fix P0137 Chrysler
- Use an OBD-II scanner to confirm the P0137 code and identify the exact sensor location.
- Inspect the wiring and connectors for any damage or corrosion, repairing or replacing as needed.
- Test the O2 sensor with a multimeter to check for proper voltage output and replace if necessary.
- Check for exhaust leaks near the sensor and repair them.
- Clear the code with the scanner and test drive the vehicle to ensure the issue is resolved.
Cost to Fix P0137 Chrysler
The typical repair costs for addressing a P0137 code can range from $100 to $300, depending on the specific cause of the issue and the cost of parts and labor in your area. It's important to note that diagnosis time and labor rates can vary, so it's recommended to get quotes from local auto repair shops for a more accurate estimate.
Tech Notes for P0137 Chrysler
User Submitted Video
When is the Code Detected?
Need more information about the P0137 Chrysler code?
Need more information on how to fix the P0137 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0137 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0137 Chrysler Code
1. What are the common symptoms of OBDII code P0137 in a Chrysler vehicle?
- Common symptoms include poor fuel economy, rough idling, engine misfires, and the illumination of the check engine light.
2. What does the O2 Sensor Circuit Low Voltage Bank 1 Sensor 2 error code P0137 mean in a Chrysler car?
- This code indicates that the O2 sensor located after the catalytic converter on bank 1 is sending a low voltage signal to the engine control module.
3. What are the possible causes of the P0137 error code in a Chrysler vehicle?
- The most common causes include a faulty O2 sensor, damaged wiring or connectors, exhaust system leaks, or a failing catalytic converter.
4. How can I diagnose the P0137 code in my Chrysler car?
- Diagnosing this code typically involves using a scan tool to read the O2 sensor data, visually inspecting the sensor and its wiring, and conducting tests to check for exhaust leaks.
5. Can I drive my Chrysler with the P0137 code without causing further damage?
- While the vehicle may still be driveable, it is not recommended to ignore the P0137 code as it can lead to reduced fuel efficiency and potential damage to the catalytic converter over time.
6. Is it possible to reset the P0137 code in a Chrysler vehicle, and will it come back?
- You can reset the code using a scan tool, but if the underlying issue is not addressed, the code is likely to return after driving the vehicle for a certain period.
7. How much does it usually cost to repair the P0137 code in a Chrysler car?
- The cost of repairing the P0137 code can vary depending on the exact cause, but it typically ranges from $100 to $300 for parts and labor.
8. Can I replace the O2 sensor myself to fix the P0137 error code in my Chrysler?
- While replacing the O2 sensor is a common fix for this code, it requires some mechanical knowledge and tools. If you're comfortable working on your car, you can replace the sensor yourself.
9. Are there any preventive maintenance tips to avoid the P0137 code in a Chrysler vehicle?
- Regularly scheduled maintenance, such as checking and replacing the O2 sensors as recommended by the manufacturer, can help prevent the occurrence of the P0137 code.
10. How long does it take to repair the P0137 code in a Chrysler car?
- The repair time can vary depending on the exact cause and the complexity of the repair. In general, it can take anywhere from 1 to 3 hours to fix the P0137 code in a Chrysler vehicle.
Discuss the causes and fixes for P0137 Chrysler OBDII Code
Code P0137 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.