Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Replacing the Front Heated Oxygen Sensor Bank 1 usually takes care of the problem.
There is a factory service bulletin for the following Toyota models:
2003 Toyota Corolla
2003 Toyota Matrix
The service bulletin recommends replacing the O2 sensors to fix the problem.
The cost to diagnose the P0133 TOYOTA code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
The response of the voltage signal from the sensor takes more than the specified time.
The front heated oxygen sensor (or O2 sensor 1) is placed into the exhaust manifold. It detects the amount of oxygen in the exhaust gas compared to the outside air. The heated oxygen sensor 1 has a closed-end tube made of ceramic zirconia. The zirconia generates voltage from approximately 1V in richer conditions to 0V in leaner conditions. The heated oxygen sensor 1 signal is sent to the Engine Control Module (ECM). The ECM adjusts the injection pulse duration to achieve the ideal air-fuel ratio. The ideal air-fuel ratio occurs near the radical change from 1V to 0V.
Need more information on how to fix the P0133 TOYOTA code?
Get Access to Factory Service Manuals
Get the p0133 toyota code diagnosed by a professional: Find a repair shop in your area