P0113 GMC Code - Intake Air Temperature Circuit High Input
Quick Answer
The P0113 GMC code indicates that the Intake Air Temperature (IAT) sensor circuit is registering a high input. Common causes include Faulty IAT sensor, Loose or corroded wiring connections, Intake air leaks. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0113 GMC indicates Intake Air Temperature Circuit High Input.
- Common causes
- Common causes include Faulty IAT sensor, Loose or corroded wiring connections, Intake air leaks.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0113 GMC Description
The P0113 GMC code indicates that the Intake Air Temperature (IAT) sensor circuit is registering a high input. The IAT sensor is responsible for measuring the temperature of the air entering the engine. This information is crucial for the engine control module to adjust fuel mixture and ignition timing, optimizing performance and fuel efficiency. A high input reading from the IAT sensor can lead to incorrect calculations by the engine control module, resulting in poor engine performance, decreased fuel efficiency, and potential drivability issues.
Common Causes of P0113 GMC
- Faulty IAT sensor
- Loose or corroded wiring connections
- Intake air leaks
- Engine coolant temperature sensor malfunction
- Issues with the engine control module
Symptoms of P0113 GMC
- Check Engine Light illuminated
- Engine running rough or stalling
- Decreased fuel efficiency
- Engine overheating
- Rough idle
How to Fix P0113 GMC
- Begin by locating the IAT sensor in the intake air duct or air cleaner assembly.
- Inspect the wiring and connector for any signs of damage, corrosion, or loose connections.
- Test the IAT sensor using a multimeter to determine if it is functioning properly.
- If the sensor is faulty, replace it with a new one.
- Clear the diagnostic trouble codes and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0113 GMC
The cost of repairing a P0113 GMC code can vary depending on the specific cause of the issue. Generally, the cost of replacing an IAT sensor ranges from $50 to $100, including parts and labor. Additional costs may be incurred if there are other underlying issues that need to be addressed. It's recommended to consult with a professional mechanic to get an accurate estimate for your specific vehicle.
Need more information about the P0113 GMC code?
Need more information on how to fix the P0113 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0113 GMC code diagnosed by a professional: Find a repair shop in your area
Information for Specific GMC Models
- P0113 2014 GMC Sierra — Intake Air Temperature Circuit High Input
- P0113 2015 GMC Sierra — Intake Air Temperature Circuit High Input
- P0113 2016 GMC Sierra — Intake Air Temperature Circuit High Input
- P0113 2017 GMC Sierra — Intake Air Temperature Circuit High Input
- P0113 2018 GMC Sierra — Intake Air Temperature Circuit High Input
Frequently Asked Questions about P0113 GMC Code
1. What are the common symptoms of OBDII code P0113 GMC (Intake Air Temperature Circuit High Input)?
- Common symptoms include poor engine performance, decreased fuel efficiency, and potential stalling or rough idling.
2. What are the typical causes of OBDII code P0113 GMC?
- The typical causes of P0113 GMC include a faulty intake air temperature sensor, damaged wiring or connectors, or issues with the sensor's circuit.
3. How can I diagnose the reason behind OBDII code P0113 GMC?
- Diagnose the code by checking the intake air temperature sensor's wiring and connectors for damage, testing the sensor's resistance, and ensuring proper voltage supply.
4. What repairs can be done to fix OBDII code P0113 GMC?
- Repairs may involve replacing the intake air temperature sensor, repairing damaged wiring or connectors, or resetting the code after fixing any underlying issues.
5. Can a dirty air filter cause OBDII code P0113 GMC?
- While a dirty air filter can affect engine performance, it is not a direct cause of P0113 GMC. Focus on checking the intake air temperature sensor and related components.
6. Is it safe to continue driving with OBDII code P0113 GMC present?
- It is not recommended to continue driving with P0113 GMC, as it can lead to poor engine performance and potential further damage if left unresolved.
7. Will disconnecting the battery reset OBDII code P0113 GMC?
- Disconnecting the battery may temporarily clear the code, but it is essential to diagnose and fix the underlying issue to prevent the code from reappearing.
8. Can extreme weather conditions trigger OBDII code P0113 GMC?
- Extreme temperature fluctuations can impact the intake air temperature sensor readings, potentially leading to a false high input and triggering P0113 GMC.
9. How can I prevent OBDII code P0113 GMC from recurring?
- Regularly inspect and maintain the intake air temperature sensor, wiring, and connectors, and address any issues promptly to prevent the code from recurring.
10. Can a mechanic help diagnose and repair OBDII code P0113 GMC?
- Yes, a qualified mechanic can perform diagnostic tests, identify the cause of P0113 GMC, and make the necessary repairs to resolve the issue effectively.
Discuss the causes and fixes for P0113 GMC OBDII Code
Code P0113 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.