P0113 2018 GMC Sierra Code - Intake Air Temperature Circuit High Input
Quick Answer
The P0113 diagnostic trouble code (DTC) for a 2018 GMC Sierra indicates an issue with the Intake Air Temperature (IAT) sensor circuit registering a high input. Common causes include Faulty Intake Air Temperature (IAT) sensor, Damaged wiring or connectors in the IAT sensor circuit, Issues with the Engine Control Module (ECM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0113 2018 GMC Sierra indicates Intake Air Temperature Circuit High Input.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT) sensor, Damaged wiring or connectors in the IAT sensor circuit, Issues with the Engine Control Module (ECM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P0113 2018 GMC Sierra Description
The P0113 diagnostic trouble code (DTC) for a 2018 GMC Sierra indicates an issue with the Intake Air Temperature (IAT) sensor circuit registering a high input. The IAT sensor is responsible for monitoring the temperature of the air entering the engine. When the sensor detects a high input, it means that the temperature reading is higher than expected, which can lead to various performance issues in the vehicle.
Common Causes of P0113 2018 GMC Sierra
- Faulty Intake Air Temperature (IAT) sensor.
- Damaged wiring or connectors in the IAT sensor circuit.
- Issues with the Engine Control Module (ECM).
- Air intake leaks affecting temperature readings.
- Extreme weather conditions affecting sensor performance.
Symptoms of P0113 2018 GMC Sierra
- Check Engine Light illuminated on the dashboard.
- Decreased fuel efficiency.
- Rough idling or stalling.
- Hesitation during acceleration.
- Engine misfires.
How to Fix P0113 2018 GMC Sierra
- Begin by locating the IAT sensor in the air intake system.
- Inspect the wiring and connectors for any damage or corrosion.
- Test the IAT sensor using a multimeter to check for proper resistance values.
- Replace the IAT sensor if it is found to be faulty.
- Clear the DTC and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P0113 2018 GMC Sierra
The typical repair costs for addressing a P0113 code on a 2018 GMC Sierra can range from $100 to $300, including parts and labor. However, specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It's recommended to check local rates for a more accurate estimate. Keep in mind that rates at dealerships or in metropolitan areas may be higher, while independent shops often charge less.
Need more information about the P0113 2018 GMC Sierra code?
Need more information on how to fix the P0113 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0113 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0113 2018 GMC Sierra Code
1. What does the OBDII code P0113 mean on a 2018 GMC Sierra?
P0113 indicates that the Powertrain Control Module (PCM) has detected a high voltage signal from the Intake Air Temperature (IAT) sensor, which typically means the sensor is reading a very low temperature.
2. What are the common symptoms of code P0113 in a 2018 GMC Sierra?
Common symptoms include poor engine performance, reduced fuel efficiency, difficulty starting the engine, and possibly an illuminated Check Engine Light.
3. What causes the P0113 code to appear on a 2018 GMC Sierra?
Potential causes include a faulty IAT sensor, damaged or disconnected wiring, a dirty or clogged air filter, or a PCM issue.
4. How does the Intake Air Temperature (IAT) sensor work in a GMC Sierra?
The IAT sensor measures the temperature of the air entering the engine and sends this data to the PCM, which uses it to adjust air-fuel ratios for optimal performance.
5. Can I drive my 2018 GMC Sierra with the P0113 code?
Driving with the P0113 code is possible but not recommended, as it can lead to reduced performance, poor fuel economy, and potential long-term engine damage.
6. How do I diagnose the P0113 code on a 2018 GMC Sierra?
Diagnosis typically involves inspecting the IAT sensor and its wiring for damage, checking the air filter, and using a multimeter to test the sensor's voltage output.
7. How do I fix the P0113 code on my 2018 GMC Sierra?
Common fixes include replacing the IAT sensor, repairing damaged wiring, cleaning or replacing the air filter, or in rare cases, reprogramming the PCM.
8. Where is the IAT sensor located on a 2018 GMC Sierra?
The IAT sensor is usually located in the intake manifold or integrated into the mass air flow (MAF) sensor near the air filter housing.
9. How much does it cost to fix the P0113 code on a 2018 GMC Sierra?
Repair costs vary but typically range from $50 to $200, depending on whether the IAT sensor needs replacement or if additional repairs are required.
10. What tools are needed to troubleshoot the P0113 code on a 2018 GMC Sierra?
Basic tools such as a code scanner, multimeter, and possibly a repair manual for reference are commonly used to diagnose and fix this issue.
Discuss the causes and fixes for P0113 2018 GMC Sierra OBDII Code
Code P0113 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.