B1B93 Code - Passenger Seat Track Position Sensor Circuit Low
Quick Answer
The B1B93 diagnostic trouble code (DTC) indicates a problem with the passenger seat track position sensor circuit being detected as low. Common causes include Faulty passenger seat track position sensor, Damaged wiring or connectors in the sensor circuit, Corrosion or moisture intrusion in the sensor circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1B93 indicates Passenger Seat Track Position Sensor Circuit Low.
- Common causes
- Common causes include Faulty passenger seat track position sensor, Damaged wiring or connectors in the sensor circuit, Corrosion or moisture intrusion in the sensor circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1B93 Description
The B1B93 diagnostic trouble code (DTC) indicates a problem with the passenger seat track position sensor circuit being detected as low. This sensor is responsible for monitoring the position of the passenger seat track, allowing the vehicle's computer system to adjust the seat position accordingly. When the sensor circuit is reading low, it means that the signal being sent by the sensor is below the expected range, indicating a potential issue with the sensor itself or the wiring connected to it.
Common Causes of B1B93
- Faulty passenger seat track position sensor.
- Damaged wiring or connectors in the sensor circuit.
- Corrosion or moisture intrusion in the sensor circuit.
- Electrical issues within the vehicle's system affecting the sensor circuit.
- Impact or physical damage to the passenger seat track sensor.
Symptoms of B1B93
- Incorrect passenger seat position adjustments.
- Airbag warning light illuminated on the dashboard.
- Inability to adjust the passenger seat electronically.
- Unusual noises coming from the passenger seat track.
How to Fix B1B93
- Begin by diagnosing the specific cause of the low circuit reading using a diagnostic scan tool.
- Inspect the wiring and connectors in the sensor circuit for any signs of damage or corrosion.
- Test the passenger seat track position sensor to determine if it is functioning correctly.
- Replace the sensor if it is found to be faulty, ensuring proper installation and calibration.
- Clear the DTC from the vehicle's computer system and test the passenger seat adjustments to confirm the issue has been resolved.
Cost to Fix B1B93
The typical repair costs for addressing a B1B93 code related to the passenger seat track position sensor circuit low can vary depending on the specific cause of the issue and the vehicle's make and model. In general, parts for this repair could range from $100 to $300, while labor costs may add another $100 to $200. Overall, the total repair cost could fall between $200 and $500. It's important to note that these estimates are rough averages, and actual costs may differ based on individual circumstances and the rates of the auto repair shop chosen for the service.
Need more information about the B1B93 code?
Need more information on how to fix the B1B93 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1B93 code diagnosed by a professional: Find a repair shop in your area
Code B1B93 Information for Specific Makes
- B1B93 Chrysler — Passenger Seat Track Position Sensor Circuit Low
- B1B93 Dodge — Passenger Seat Track Position Sensor Circuit Low
- B1B93 Jeep — Passenger Seat Track Position Sensor Circuit Low
- B1B93 Mitsubishi — Passenger Seat Track Position Sensor Circuit Low
- B1B93 RAM — Passenger Seat Track Position Sensor Circuit Low
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1B93 Code
1. What does the OBDII code B1B93 mean?
The B1B93 code indicates a problem with the passenger seat track position sensor circuit, specifically that the circuit is showing a low voltage condition.
2. What are the symptoms of the B1B93 code?
Common symptoms include the airbag warning light being illuminated, improper airbag deployment in a collision, and potential issues with seat position adjustment sensors.
3. What causes the B1B93 code?
The code can be triggered by a faulty seat track position sensor, damaged or corroded wiring, a loose connector, or a malfunctioning airbag control module.
4. Can I drive with the B1B93 code active?
While the vehicle may still be drivable, the airbag system may not function correctly, which can compromise passenger safety in a collision.
5. How do I diagnose the B1B93 code?
Diagnose the issue by using a scan tool to confirm the code, inspecting the seat track position sensor and its wiring, and checking for loose or damaged connectors.
6. How do I fix the B1B93 code?
Repairs may include replacing the seat track position sensor, repairing or replacing damaged wiring, reconnecting loose connectors, or reprogramming the airbag control module if necessary.
7. How much does it cost to repair the B1B93 code?
Repair costs can range from $100 to $300, depending on whether the issue is with the sensor, wiring, or control module.
8. Can I reset the B1B93 code without repairs?
Clearing the code without addressing the root cause may temporarily turn off the warning light, but the issue will likely return and could affect airbag functionality.
9. Is the B1B93 code related to airbag deployment?
Yes, this code is related to the airbag system, as the seat track position sensor helps determine proper airbag deployment in an accident.
10. What tools are needed to fix the B1B93 code?
You’ll typically need a diagnostic scan tool, a multimeter for testing voltage, and basic hand tools for inspecting and replacing components.
Discuss the causes and fixes for B1B93 OBDII Code
Code B1B93 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.