B1B93 Chrysler Code - Passenger Seat Track Position Sensor Circuit Low
Quick Answer
The B1B93 Chrysler code indicates a problem with the passenger seat track position sensor circuit being too low. Common causes include Damaged wiring or connectors in the sensor circuit, Faulty passenger seat track position sensor, Corrosion or debris affecting sensor readings. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1B93 Chrysler indicates Passenger Seat Track Position Sensor Circuit Low.
- Common causes
- Common causes include Damaged wiring or connectors in the sensor circuit, Faulty passenger seat track position sensor, Corrosion or debris affecting sensor readings.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1B93 Chrysler Description
The B1B93 Chrysler code indicates a problem with the passenger seat track position sensor circuit being too low. This sensor is responsible for detecting the position of the passenger seat, allowing the vehicle's systems to adjust accordingly for safety and comfort. When this circuit is reading a low signal, it means that the sensor is not functioning properly, which can lead to issues with the airbag system, seat adjustment features, and overall passenger safety.
Common Causes of B1B93 Chrysler
- Damaged wiring or connectors in the sensor circuit.
- Faulty passenger seat track position sensor.
- Corrosion or debris affecting sensor readings.
- Mechanical issues with the seat track mechanism.
Symptoms of B1B93 Chrysler
- Airbag warning light illuminated on the dashboard.
- Inability to adjust the passenger seat position.
- Erratic movement of the passenger seat.
- Unusual clicking or grinding noises when adjusting the seat.
How to Fix B1B93 Chrysler
- Begin by conducting a thorough inspection of the wiring and connectors in the sensor circuit to check for any damage or corrosion.
- Test the passenger seat track position sensor to determine if it is functioning correctly.
- Clean any debris or corrosion that may be affecting the sensor readings.
- If the sensor is faulty, replace it with a new one.
- Test the system after repairs to ensure proper functionality and reset any fault codes.
Cost to Fix B1B93 Chrysler
The typical repair costs for addressing a B1B93 Chrysler code can range from $200 to $500, including parts and labor. However, it's important to note that specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Rates in metropolitan areas or at dealerships may be higher, while independent shops often charge less. It's recommended to check local rates for a more accurate estimate.
Need more information about the B1B93 Chrysler code?
Need more information on how to fix the B1B93 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1B93 Chrysler code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1B93 Chrysler Code
1. What does the OBDII code B1B93 mean on a Chrysler?
The code B1B93 indicates a "Passenger Seat Track Position Sensor Circuit Low," meaning the vehicle's computer has detected a low voltage issue in the passenger seat position sensor circuit.
2. What are the common symptoms of a B1B93 code?
Common symptoms include an illuminated airbag warning light, malfunctioning passenger seat position sensor, or the airbag system not functioning as intended.
3. What causes the B1B93 code to appear?
Causes may include a faulty seat track position sensor, damaged wiring or connectors in the sensor circuit, or issues with the airbag control module.
4. Can I still drive my car with a B1B93 code?
While the car may still be drivable, the airbag system may not function correctly, posing a safety risk in the event of an accident.
5. How do I diagnose the B1B93 code?
Diagnosis involves checking the passenger seat position sensor, inspecting the wiring and connectors for damage or corrosion, and performing tests with a diagnostic scanner.
6. How can I fix the B1B93 code?
Repairs may include replacing the faulty seat track position sensor, repairing or replacing damaged wiring or connectors, or reprogramming the airbag control module if necessary.
7. Is the B1B93 code covered under warranty?
Depending on the vehicle’s warranty and age, this issue might be covered under the manufacturer’s warranty. Check with your dealership for details.
8. Can a loose seat cause the B1B93 code?
Yes, a loose or improperly adjusted seat can affect the position sensor's operation and trigger the code.
9. How much does it cost to fix the B1B93 code?
Repair costs vary, but replacing the seat track position sensor can range from $100 to $300, plus labor costs if wiring repairs are needed.
10. Can I clear the B1B93 code without fixing the problem?
Clearing the code without addressing the root cause may temporarily turn off the warning light, but the code will return if the issue persists.
Discuss the causes and fixes for B1B93 Chrysler OBDII Code
Code B1B93 Chrysler comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.