B1907 Code - Short to Ground in Front Pretensioner Squib Left Circuit
Quick Answer
The diagnostic trouble code B1907 indicates a "Short to Ground in Front Pretensioner Squib Left Circuit" in the vehicle's airbag system. Common causes include Damaged wiring or connectors in the front pretensioner squib left circuit, Short circuit or electrical overload in the circuit, Faulty seatbelt pretensioner squib. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1907 indicates Short to Ground in Front Pretensioner Squib Left Circuit.
- Common causes
- Common causes include Damaged wiring or connectors in the front pretensioner squib left circuit, Short circuit or electrical overload in the circuit, Faulty seatbelt pretensioner squib.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1907 Description
The diagnostic trouble code B1907 indicates a "Short to Ground in Front Pretensioner Squib Left Circuit" in the vehicle's airbag system. In simpler terms, this means that there is an electrical issue in the circuit that controls the deployment of the front seatbelt pretensioner on the left side of the vehicle. The pretensioner is a safety feature that tightens the seatbelt in the event of a collision, helping to secure the occupant in place and reduce the risk of injury.
Common Causes of B1907
- Damaged wiring or connectors in the front pretensioner squib left circuit
- Short circuit or electrical overload in the circuit
- Faulty seatbelt pretensioner squib
- Corrosion or moisture in the electrical connections
- Impact or damage to the vehicle that affects the airbag system wiring
Symptoms of B1907
- Illumination of the airbag warning light on the dashboard
- Inability to reset the airbag warning light even after attempting to clear the code
- Faulty operation of the front seatbelt pretensioner on the left side
- Intermittent or non-functioning airbag deployment system
- Diagnostic trouble codes related to the airbag system stored in the vehicle's computer
How to Fix B1907
- Begin by disconnecting the vehicle's battery to prevent any electrical accidents.
- Inspect the wiring and connectors in the front pretensioner squib left circuit for damage, wear, or corrosion.
- Test the seatbelt pretensioner squib for continuity and resistance to determine if it is faulty.
- Replace any damaged wiring, connectors, or the seatbelt pretensioner squib as needed.
- Clear the diagnostic trouble codes from the vehicle's computer and test the airbag system to ensure proper functioning.
Cost to Fix B1907
The typical repair costs for addressing a "Short to Ground in Front Pretensioner Squib Left Circuit" code can range from $200 to $500, depending on the extent of the damage and the parts needed for replacement. This estimate includes the cost of labor and any necessary components. It is important to note that the specific diagnosis time and labor rates at auto repair shops can vary significantly, so it is advisable to obtain quotes from local shops to get a more accurate estimate. Factors such as the vehicle make and model, location, and the expertise of the technician can also impact the final cost of the repair.
Need more information about the B1907 code?
Need more information on how to fix the B1907 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1907 code diagnosed by a professional: Find a repair shop in your area
Code B1907 Information for Specific Makes
- B1907 Hyundai — Front Sensor Signal Fault
- B1907 KIA — Front Sensor Signal Fault
- B1907 Lexus — Short to Ground in Front Pretensioner Squib Left Circuit
- B1907 Scion — Short to Ground in Front Pretensioner Squib Left Circuit
- B1907 Toyota — Short to Ground in Front Pretensioner Squib Left Circuit
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1907 Code
1. What are the common symptoms of OBDII code B1907 (Short to Ground in Front Pretensioner Squib Left Circuit)?
- Common symptoms include the airbag warning light being illuminated on the dashboard and possible loss of functionality of the front left seatbelt pretensioner.
2. What can cause OBDII code B1907 to be triggered?
- This code is typically triggered by a short circuit to ground in the wiring or connector of the front pretensioner squib left circuit.
3. How serious is OBDII code B1907 (Short to Ground in Front Pretensioner Squib Left Circuit)?
- This code indicates a potential issue with the safety system of the vehicle, specifically the front left seatbelt pretensioner, and should be addressed promptly to ensure proper airbag deployment in case of an accident.
4. What is the recommended course of action when OBDII code B1907 is detected?
- It is recommended to have the vehicle inspected by a qualified technician to diagnose the exact cause of the short to ground in the front pretensioner squib left circuit and make the necessary repairs.
5. Can I continue driving my vehicle with OBDII code B1907 present?
- It is not advisable to continue driving the vehicle with this code present, as it may compromise the proper functioning of the front left seatbelt pretensioner and airbag system.
6. How can I repair OBDII code B1907 on my own?
- Repairing this code may require advanced electrical diagnostic skills and specialized tools. It is recommended to seek professional assistance to properly diagnose and repair the issue.
7. Is it necessary to replace the front pretensioner squib left circuit to resolve OBDII code B1907?
- In some cases, the issue may be resolved by repairing the wiring or connector causing the short to ground. However, if the component itself is faulty, it may need to be replaced.
8. Will resetting the OBDII code B1907 turn off the airbag warning light?
- Resetting the code may temporarily turn off the warning light, but it will likely reappear if the underlying issue is not addressed. It is important to fix the root cause of the problem to prevent the code from returning.
9. How much does it typically cost to repair OBDII code B1907?
- The cost of repairing this code can vary depending on the extent of the damage and the specific repairs needed. It is best to consult with a professional technician for an accurate estimate.
10. Can OBDII code B1907 be a recurring issue even after it has been repaired?
- If the root cause of the short to ground in the front pretensioner squib left circuit is not properly addressed, the code may reoccur. It is important to ensure that the repairs are done correctly to prevent future issues.
Discuss the causes and fixes for B1907 OBDII Code
Code B1907 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.