B1907 Scion Code - Short to Ground in Front Pretensioner Squib Left Circuit
Quick Answer
The B1907 diagnostic trouble code for Scion vehicles indicates a short to ground in the front pretensioner squib left circuit. Common causes include Damaged wiring or connectors in the front left seatbelt pretensioner circuit, Faulty front left seatbelt pretensioner squib, Corrosion or moisture intrusion in the circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1907 Scion indicates Short to Ground in Front Pretensioner Squib Left Circuit.
- Common causes
- Common causes include Damaged wiring or connectors in the front left seatbelt pretensioner circuit, Faulty front left seatbelt pretensioner squib, Corrosion or moisture intrusion in the circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code B1907 Scion Description
The B1907 diagnostic trouble code for Scion vehicles indicates a short to ground in the front pretensioner squib left circuit. In simpler terms, this means that there is an electrical issue in the circuit responsible for the front left seatbelt pretensioner. The pretensioner is a safety feature that tightens the seatbelt in the event of a collision, helping to secure the occupant in place and reduce the risk of injury. A short to ground in this circuit can prevent the pretensioner from functioning properly, potentially compromising the safety of the vehicle's occupants in the event of an accident.
Common Causes of B1907 Scion
- Damaged wiring or connectors in the front left seatbelt pretensioner circuit
- Faulty front left seatbelt pretensioner squib
- Corrosion or moisture intrusion in the circuit
- Impact or collision that damaged the pretensioner system
- Electrical issues such as a short circuit in the wiring
Symptoms of B1907 Scion
- Airbag warning light illuminated on the dashboard
- Inoperative front left seatbelt pretensioner
- Intermittent or non-functional airbag system
- Diagnostic trouble code B1907 stored in the vehicle's computer
- Audible chime or warning message indicating a problem with the SRS
How to Fix B1907 Scion
- Begin by disconnecting the vehicle's battery to prevent accidental deployment of the airbags.
- Inspect the wiring and connectors in the front left seatbelt pretensioner circuit for damage or corrosion.
- Test the front left seatbelt pretensioner squib for continuity and proper function.
- Repair or replace any damaged wiring, connectors, or components as needed.
- Clear the diagnostic trouble code from the vehicle's computer and perform a test to ensure the issue has been resolved.
Cost to Fix B1907 Scion
The cost of repairing a short to ground in the front pretensioner squib left circuit can vary depending on the specific cause of the issue and the extent of the damage. In general, the cost of parts for this repair can range from $100 to $300, while labor costs can range from $150 to $400. Overall, the total repair cost for this issue may fall between $250 and $700. It is important to note that these are rough estimates, and actual costs may vary based on factors such as the vehicle's make and model, the location of the repair shop, and the availability of parts. It is recommended to consult with a qualified mechanic or repair shop for a more accurate cost estimate based on your specific circumstances.
Need more information about the B1907 Scion code?
Need more information on how to fix the B1907 Scion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1907 Scion code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1907 Scion Code
1. What are the common symptoms of OBDII code B1907 in a Scion related to the Front Pretensioner Squib Left Circuit?
The common symptoms include the airbag warning light being illuminated on the dashboard and potential issues with the seatbelt pretensioner system.
2. What does the OBDII code B1907 Scion indicate about the Front Pretensioner Squib Left Circuit?
This code indicates a short to ground in the front pretensioner squib left circuit, which can affect the proper deployment of the seatbelt pretensioner in the event of a collision.
3. What are the possible causes of OBDII code B1907 in a Scion?
Possible causes include damaged wiring in the front pretensioner squib left circuit, a faulty seatbelt pretensioner squib, or a malfunctioning airbag control module.
4. How can I diagnose the issue related to OBDII code B1907 in my Scion?
Diagnosing the issue involves using a scan tool to retrieve the specific fault code, inspecting the wiring and connectors in the front pretensioner squib left circuit, and testing the seatbelt pretensioner system components for proper functionality.
5. Can I repair OBDII code B1907 in my Scion on my own?
Repairing this issue may require advanced knowledge and specialized tools, so it is recommended to seek assistance from a qualified mechanic or dealership to properly diagnose and repair the problem.
6. Are there any safety concerns associated with OBDII code B1907 in a Scion?
Yes, unresolved issues related to the front pretensioner squib left circuit can affect the proper operation of the seatbelt pretensioner system, compromising occupant safety in the event of a collision.
7. How much does it typically cost to repair OBDII code B1907 in a Scion?
The cost of repair can vary depending on the specific cause of the issue, but it may involve replacing damaged wiring, faulty components, or reprogramming the airbag control module, which can range from a few hundred to over a thousand dollars.
8. Can ignoring OBDII code B1907 impact the overall functionality of my Scion?
Ignoring this code can potentially compromise the effectiveness of the seatbelt pretensioner system and overall safety features of your vehicle, so it is important to address the issue promptly.
9. Is it safe to drive my Scion with OBDII code B1907 present?
It is not recommended to drive the vehicle with this code present, as it indicates a problem with the seatbelt pretensioner system, which is a critical safety component in the event of a collision.
10. How can I prevent OBDII code B1907 from occurring in my Scion in the future?
Regular maintenance, including inspecting the wiring harness and connectors in the seatbelt pretensioner system, can help prevent issues that may trigger this fault code in the future.
Discuss the causes and fixes for B1907 Scion OBDII Code
Code B1907 Scion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.