B116C Possible Causes
- Faulty Power Running Board Motor Assembly
- Power Running Board Motor Assembly harness is open or shorted
- Power Running Board Motor Assembly circuit poor electrical connection
- Faulty Power Running Board (PRB) Module
How do I fix code B116C
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the B116C code
Labor: 1.0The cost of diagnosing the B116C code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
B116C Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
B116C MeaningDuring Power Running Board (PRB) deployment, the PRB module supplies power to the PRB motor and ground through the circuit. The PRB module stows the PRB by supplying power to the PRB motor and ground through the circuit. The PRB module provides a regulated 10-volt power supply to the Hall-effect sensor (internal to the PRB motor) through the circuit. The Hall-effect ground is provided by the PRB module through the circuit. The PRB module monitors the PRB Hall-effect signal through the circuit. If the PRB module does not receive any signal from the Hall-effect sensor during operation, the PRB will stop. The PRB module sets this Diagnostic Trouble Code (DTC) if it detects the RH running board motor circuit(s) are shorted together.
B116C More InformationNeed more information on how to fix the B116C code?
Get Access to Factory Service Manuals