Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
The cost to diagnose the B116C Mercury code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
During Power Running Board (PRB) deployment, the PRB module supplies power to the PRB motor and ground through the circuit. The PRB module stows the PRB by supplying power to the PRB motor and ground through the circuit. The PRB module provides a regulated 10-volt power supply to the Hall-effect sensor (internal to the PRB motor) through the circuit. The Hall-effect ground is provided by the PRB module through the circuit. The PRB module monitors the PRB Hall-effect signal through the circuit. If the PRB module does not receive any signal from the Hall-effect sensor during operation, the PRB will stop. The PRB module sets this Diagnostic Trouble Code (DTC) if it detects the RH running board motor circuit(s) are shorted together.
Need more information on how to fix the B116C Mercury code? Get Access to Factory Service Manuals
Get the B116C Mercury code diagnosed by a professional: Find a repair shop in your area