Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
The cost to diagnose the B0775 code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
The Four Wheel Drive HI indicator circuit consists of a Light Emitting Diode (LED) feed circuit, a LED, and a LED control circuit. The indicator dimming control circuit is the LED feed circuit and continuously supplies B+ to the 2WD HI, 4WD Auto, 4WD HI and 4WD LO LEDs. When the 4WD HI mode has been selected by the driver, the Transfer Case Shift Control Module (TCCM) provides a ground through the 4 HI indicator control circuit illuminating the LED.
The TCCM tests the 4WD HI indicator circuit for unexpected voltage by monitoring the B+ supplied by the BCM on the indicator dimming control circuit by grounding the 4WD HI indicator control circuit for 2 seconds during the Bulb Test at key ON.
Need more information on how to fix the B0775 code? Get Access to Factory Service Manuals
Get the B0775 code diagnosed by a professional: Find a repair shop in your area