U1713 CADILLAC - Driver Power Window High Speed Serial Data Circuit Voltage
U1713 CADILLAC Possible Causes
- Faulty Drive Power Window Sensor/Motor
- Drive Power Window Sensor/Motor harness is open or shorted
- Drive Power Window Sensor/Motor circuit poor electrical connection
- Faulty Driver Door Module (DDM)
How is the U1713 CADILLAC code repair?Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
What is the cost to diagnose the U1713 CADILLAC code
Labor: 1.0The cost to diagnose the U1713 CADILLAC code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
How much do you know about cars?
Take the AutoCodes.com automotive tests and turbo-charge your car repair knowledge
- Engine Light ON (or Service Engine Soon Warning Light)
U1713 CADILLAC MeaningExpress Up operation of the front door power windows is monitored and controlled by the front door modules and the window sensors. Each front door window motor has a window sensor mounted to it. The Driver Door Module (DDM) and the Passenger Front Door Module (PFDM) each supply battery voltage and ground to power their respective window sensors. The door modules and sensors communicate with each other via a power window high-speed serial data circuit, and a power window low-speed serial data circuit.
The window sensor detects differences in the window motors electrical pulses to determine if there is an obstruction to the travel of the window glass. The door modules use the information generated by the sensors to disable the Express-Up movement of a window or reverse the direction of travel, in the event that a passenger, or other obstacle, has become trapped in it.
The power window high-speed serial data circuit is a unique one-way communications link between the sensor and the door module. The sensor uses a voltage signal, and also a 1kHz signal, to transmit information, via this circuit, from the sensor to the door module.
The Diagnostic Trouble Code (DTC) will be set by the Driver Door Module (DDM) or the Passenger Front Door Module (PFDM) when the DDM or PFDM detects either of the following conditions: The power window high-speed serial data circuit voltage is a constant low for 112 milliseconds while the window is not moving or the power window high-speed serial data circuit 1 kHz signal is active for a period of 112 milliseconds while the window is not moving.
More InformationNeed more information on how to fix the U1713 CADILLAC code?
Get Access to Factory Service Manuals