U1475 Code - Implausible Data Received From Right Impact Pressure Sensor Is Active

Quick Answer

The U1475 code indicates that the vehicle's right impact pressure sensor is sending implausible data to the engine control module (ECM). Common causes include Faulty right impact pressure sensor, Wiring or connection issues, Malfunctioning ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means

U1475 indicates Implausible Data Received From Right Impact Pressure Sensor Is Active.

Common causes

Common causes include Faulty right impact pressure sensor, Wiring or connection issues, Malfunctioning ECM.

Severity

High - diagnose this code as soon as possible.

Can I drive?

Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

• Description
• Common Causes
• Symptoms
• How To Fix
• Cost to Fix
• FAQs
• Comments
• Add Comment

Common Causes of U1475

Symptoms of U1475

How to Fix U1475

Cost to Fix U1475

Need more information about the U1475 code?

Need more information on how to fix the U1475 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U1475 code diagnosed by a professional: Find a repair shop in your area

Code U1475 Information for Specific Makes

• U1475 Chrysler — Implausible Data Received From Right Impact Pressure Sensor Is Active
• U1475 Dodge — Implausible Data Received From Right Impact Pressure Sensor Is Active
• U1475 Jeep — Implausible Data Received From Right Impact Pressure Sensor Is Active
• U1475 RAM — Implausible Data Received From Right Impact Pressure Sensor Is Active

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

• Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
• Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
• Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
• Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U1475 Code

1. What are the common symptoms of OBDII code U1475?

- Common symptoms include the illumination of the check engine light, issues with the right impact pressure sensor, and potential problems with the vehicle's airbag system.

2. What does the OBDII code U1475 indicate?

- The code U1475 indicates that the right impact pressure sensor is sending implausible data to the vehicle's onboard computer.

3. What are the possible causes of code U1475?

- Possible causes include a faulty right impact pressure sensor, damaged wiring or connectors related to the sensor, or issues with the airbag control module.

4. How can I diagnose the U1475 code?

- Diagnosis typically involves using an OBDII scanner to retrieve the code, inspecting the right impact pressure sensor and related components for damage, and checking the wiring for any issues.

5. Can I still drive my vehicle with the U1475 code present?

- It is not recommended to drive the vehicle with the U1475 code present, as it may indicate potential issues with the airbag system that could affect its performance in the event of a collision.

6. How can I repair the U1475 code?

- Repairing the U1475 code may involve replacing the right impact pressure sensor, repairing damaged wiring or connectors, or resetting the airbag system to clear the code.

7. Is it safe to reset the U1475 code using an OBDII scanner?

- While resetting the code may temporarily turn off the check engine light, it is important to address the underlying issue causing the code to prevent potential safety hazards.

8. Can a DIY enthusiast fix the U1475 code at home?

- Depending on the cause of the code, some DIY enthusiasts may be able to address the issue at home by replacing the sensor or checking the wiring. However, professional help may be needed for more complex repairs.

9. How much does it cost to repair the U1475 code?

- The cost of repairing the U1475 code can vary depending on the underlying issue, the cost of parts needed for repair, and whether professional labor is required. It's best to consult with a mechanic for an accurate estimate.

10. Will the U1475 code affect my vehicle's performance?

- While the U1475 code itself may not directly impact the vehicle's performance, it is important to address the underlying issue promptly to ensure the proper functioning of the airbag system and overall safety of the vehicle.