U1470 Dodge Code - Implausible Data Received From Left Impact Pressure Sensor
Quick Answer
The U1470 diagnostic trouble code (DTC) for Dodge vehicles indicates that there is an issue with the left impact pressure sensor, leading to implausible data being received. Common causes include Faulty left impact pressure sensor, Wiring or connection issues in the airbag system, Corrosion or damage to sensor components. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U1470 Dodge indicates Implausible Data Received From Left Impact Pressure Sensor.
- Common causes
- Common causes include Faulty left impact pressure sensor, Wiring or connection issues in the airbag system, Corrosion or damage to sensor components.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code U1470 Dodge Description
The U1470 diagnostic trouble code (DTC) for Dodge vehicles indicates that there is an issue with the left impact pressure sensor, leading to implausible data being received. This sensor is a crucial component of the vehicle's safety system, as it is responsible for detecting impacts and deploying the airbags as necessary. When the sensor provides incorrect or inconsistent data, it can lead to potential safety hazards, as the airbags may not deploy when needed or could deploy unnecessarily.
Common Causes of U1470 Dodge
- Faulty left impact pressure sensor
- Wiring or connection issues in the airbag system
- Corrosion or damage to sensor components
- Issues with the airbag control module
- Impact or collision that damaged the sensor or wiring
Symptoms of U1470 Dodge
- Airbag warning light illuminated on the dashboard
- Inconsistent or inaccurate airbag deployment
- Loss of communication with the left impact pressure sensor
- Vehicle may not pass a state inspection due to the airbag system malfunction
- Diagnostic trouble codes related to the airbag system may be present
How to Fix U1470 Dodge
- Begin by diagnosing the specific cause of the issue using a professional diagnostic scan tool.
- Inspect the wiring and connections related to the left impact pressure sensor for any damage or corrosion.
- Test the sensor itself to determine if it is functioning correctly or needs to be replaced.
- If the sensor is faulty, replace it with a new OEM part to ensure proper performance.
- Clear the DTCs and perform a test drive to verify that the issue has been resolved.
Cost to Fix U1470 Dodge
The typical repair costs for addressing an implausible data received from the left impact pressure sensor on a Dodge vehicle can range from $200 to $500, depending on the specific cause of the issue and the cost of parts and labor. It is essential to consult with a professional mechanic or dealership to obtain an accurate estimate for the repair. Keep in mind that labor rates and diagnostic fees can vary based on location and the vehicle's make and model.
Need more information about the U1470 Dodge code?
Need more information on how to fix the U1470 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U1470 Dodge code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about U1470 Dodge Code
1. What are the common symptoms of OBDII code U1470 in a Dodge related to the Left Impact Pressure Sensor?
- Common symptoms include the airbag warning light illuminating on the dashboard, issues with the airbag system, and potential safety concerns in the event of a collision.
2. What can cause the U1470 code related to the Left Impact Pressure Sensor in a Dodge?
- Possible causes include damaged wiring or connectors, a faulty impact pressure sensor, a malfunctioning airbag control module, or issues with the vehicle's computer system.
3. How serious is the U1470 code related to the Left Impact Pressure Sensor in a Dodge?
- This code is considered serious as it indicates a potential issue with the airbag system's ability to deploy in the event of a collision, compromising passenger safety.
4. Can I still drive my Dodge with the U1470 code related to the Left Impact Pressure Sensor?
- It is not recommended to drive the vehicle with this code present, as it may affect the proper functioning of the airbag system in the event of a crash.
5. How can I diagnose and repair the U1470 code related to the Left Impact Pressure Sensor in my Dodge?
- Diagnosing and repairing this code typically requires a professional scan tool to read the error codes, followed by inspection of the impact pressure sensor, wiring, connectors, and airbag control module for any faults.
6. Is it possible to reset the U1470 code related to the Left Impact Pressure Sensor in a Dodge without fixing the underlying issue?
- While you can clear the error code temporarily, it is not recommended as the root cause of the problem may persist, potentially compromising the airbag system's effectiveness.
7. How much does it cost to repair the U1470 code related to the Left Impact Pressure Sensor in a Dodge?
- The cost of repair can vary depending on the specific issue causing the code, but it may involve replacement of the impact pressure sensor, wiring repairs, or reprogramming of the airbag control module.
8. Can I fix the U1470 code related to the Left Impact Pressure Sensor in my Dodge myself?
- While some DIY enthusiasts may attempt to diagnose and repair this code, it is recommended to seek professional assistance due to the complexity and safety implications of the airbag system.
9. What other codes may be related to the U1470 code in a Dodge?
- Other related codes may include U1471 (Right Impact Pressure Sensor Communication Fault) or B1B02 (Driver Airbag squib 1 Circuit Open).
10. How can I prevent the U1470 code related to the Left Impact Pressure Sensor from occurring in my Dodge?
- Regular maintenance and inspection of the airbag system, including checking wiring and connectors, can help prevent issues that may trigger the U1470 code.
Discuss the causes and fixes for U1470 Dodge OBDII Code
Code U1470 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.