U146E Dodge Code - Implausible Data Received From Left C-Pillar Impact Acceleration Sensor
Quick Answer
The U146E diagnostic trouble code (DTC) for Dodge vehicles indicates that there is an issue with the Left C-Pillar Impact Acceleration Sensor, specifically that implausible data has been received from this sensor. Common causes include Faulty Left C-Pillar Impact Acceleration Sensor, Wiring issues or corrosion in the sensor circuit, Electronic control module (ECM) malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U146E Dodge indicates Implausible Data Received From Left C-Pillar Impact Acceleration Sensor.
- Common causes
- Common causes include Faulty Left C-Pillar Impact Acceleration Sensor, Wiring issues or corrosion in the sensor circuit, Electronic control module (ECM) malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code U146E Dodge Description
The U146E diagnostic trouble code (DTC) for Dodge vehicles indicates that there is an issue with the Left C-Pillar Impact Acceleration Sensor, specifically that implausible data has been received from this sensor. The C-Pillar Impact Acceleration Sensor is a crucial component of the vehicle's safety system, as it is responsible for detecting impacts and triggering the deployment of airbags and other safety features in the event of a collision.
Common Causes of U146E Dodge
- Faulty Left C-Pillar Impact Acceleration Sensor
- Wiring issues or corrosion in the sensor circuit
- Electronic control module (ECM) malfunction
- Impact or damage to the sensor due to a collision
- Software glitches or calibration errors
Symptoms of U146E Dodge
- Airbag warning light illuminated on the dashboard
- Inconsistent or erratic airbag deployment
- False alarms triggering airbag deployment
- Loss of communication with the Left C-Pillar Impact Acceleration Sensor
How to Fix U146E Dodge
- Begin by conducting a thorough inspection of the Left C-Pillar Impact Acceleration Sensor and its wiring to check for any visible damage or corrosion.
- Use a diagnostic scan tool to retrieve the specific error codes and data related to the sensor's performance.
- Test the sensor's functionality by simulating impacts and checking for proper data transmission.
- If the sensor is found to be faulty, replace it with a new, OEM-quality sensor.
- Clear the error codes and perform a final test to ensure that the sensor is now functioning correctly and transmitting accurate data.
Cost to Fix U146E Dodge
The cost of repairing the U146E DTC related to the Left C-Pillar Impact Acceleration Sensor can vary depending on the specific cause of the issue and the labor rates in your area. In general, the cost of replacing the sensor itself can range from $150 to $300, while factoring in labor costs can bring the total repair bill to around $300 to $500. It's important to note that additional diagnostic time may be needed to pinpoint the exact cause of the issue, which can add to the overall cost. Be sure to consult with a qualified mechanic or dealership for a more accurate estimate based on your vehicle's make and model.
Need more information about the U146E Dodge code?
Need more information on how to fix the U146E Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U146E Dodge code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about U146E Dodge Code
1. What are the common symptoms of OBDII code U146E in a Dodge related to the left C-pillar impact acceleration sensor?
- Common symptoms may include an illuminated check engine light, issues with the vehicle's safety systems, and potential airbag deployment malfunctions.
2. What are the possible causes of the U146E code in a Dodge vehicle?
- The code U146E typically indicates an issue with the left C-pillar impact acceleration sensor, which may be caused by sensor malfunction, wiring issues, or impact damage.
3. How serious is the U146E fault code in a Dodge vehicle?
- The U146E code related to the left C-pillar impact acceleration sensor is a serious issue as it involves the vehicle's safety systems and airbag deployment. It is important to address this problem promptly.
4. Can I continue driving my Dodge with the U146E fault code present?
- It is not recommended to drive the vehicle with the U146E code active, as it may affect the proper functioning of the safety systems, including airbag deployment in the event of a collision.
5. How can I diagnose and repair the U146E fault code in my Dodge?
- Diagnosing and repairing the U146E code usually involves checking the left C-pillar impact acceleration sensor, inspecting wiring for damage, and addressing any impact-related issues. It is advisable to consult a professional mechanic for accurate diagnosis and repair.
6. Is it possible to reset the U146E fault code in a Dodge without fixing the underlying issue?
- While you can clear the fault code using an OBDII scanner, the underlying issue with the left C-pillar impact acceleration sensor will still remain. It is crucial to address the root cause to ensure the vehicle's safety systems are functioning properly.
7. Can extreme weather conditions trigger the U146E fault code in a Dodge?
- Extreme weather conditions may not directly cause the U146E code, but they can potentially exacerbate existing issues with the left C-pillar impact acceleration sensor due to temperature fluctuations or moisture ingress.
8. Are there any DIY tips for troubleshooting the U146E fault code in a Dodge?
- DIY troubleshooting tips may include visually inspecting the sensor and wiring for any visible damage, ensuring proper connections, and checking for any recent impacts that could have affected the sensor.
9. How much does it typically cost to repair the U146E fault code in a Dodge at a dealership or repair shop?
- The cost of repairing the U146E fault code can vary depending on the extent of the issue, labor rates, and parts needed. It is advisable to obtain quotes from different repair facilities for accurate cost estimates.
10. Will the U146E fault code in a Dodge reset itself after the issue is resolved?
- Once the underlying issue with the left C-pillar impact acceleration sensor is fixed, the fault code can be cleared using an OBDII scanner. If the problem is properly addressed, the code should not reappear.
Discuss the causes and fixes for U146E Dodge OBDII Code
Code U146E Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.