U1469 Dodge Code - Implausible Gear Shift Position Signal Sent DPT CAN-CAN
Quick Answer
The U1469 diagnostic trouble code (DTC) for Dodge vehicles indicates an "Implausible Gear Shift Position Signal Sent DPT CAN-CAN." This code is typically triggered when the Body Control Module (BCM) receives an abnormal or inconsistent signal related to the gear shift position from the Dual Pressure Transmission (DPT) module via the Controller Area Network (CAN) communication bus. Common causes include Faulty gear shift position sensor, Wiring or connection issues between the DPT module and BCM, Defective BCM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U1469 Dodge indicates Implausible Gear Shift Position Signal Sent DPT CAN-CAN.
- Common causes
- Common causes include Faulty gear shift position sensor, Wiring or connection issues between the DPT module and BCM, Defective BCM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code U1469 Dodge Description
The U1469 diagnostic trouble code (DTC) for Dodge vehicles indicates an "Implausible Gear Shift Position Signal Sent DPT CAN-CAN." This code is typically triggered when the Body Control Module (BCM) receives an abnormal or inconsistent signal related to the gear shift position from the Dual Pressure Transmission (DPT) module via the Controller Area Network (CAN) communication bus. The gear shift position signal is crucial for the proper operation of the transmission system, as it allows the vehicle to accurately determine the current gear selection.
Common Causes of U1469 Dodge
- Faulty gear shift position sensor
- Wiring or connection issues between the DPT module and BCM
- Defective BCM
- CAN communication bus problems
- Software glitches or programming errors
Symptoms of U1469 Dodge
- Incorrect gear shifting
- Harsh shifting or slipping
- Hesitation during acceleration
- Limp mode activation
- Incorrect gear indicator display
How to Fix U1469 Dodge
- Use a diagnostic scan tool to retrieve the trouble codes and data related to the U1469 code.
- Inspect the gear shift position sensor and its wiring for any damage or loose connections. Replace or repair as needed.
- Check the communication between the DPT module and BCM using a multimeter or oscilloscope. Repair any faulty connections or wiring.
- Perform a software update or reprogramming of the BCM to address any potential glitches or errors.
- Clear the DTCs and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix U1469 Dodge
The typical repair costs for addressing the U1469 code can vary depending on the specific cause of the issue and the labor rates at the auto repair shop. In general, the parts required for this repair may range from $100 to $300, while the labor costs can be anywhere from $100 to $300. Therefore, the total repair cost could be between $200 and $600. It is advisable to contact local auto repair shops for accurate estimates based on your vehicle make and model, as well as the severity of the issue. Keep in mind that rates may vary based on location, vehicle type, and the expertise of the technician.
Need more information about the U1469 Dodge code?
Need more information on how to fix the U1469 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U1469 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U1469 Dodge Code
1. What does the OBDII code U1469 mean on a Dodge vehicle?
The U1469 code indicates that an implausible gear shift position signal was detected, sent via the CAN-CAN (Controller Area Network) communication system.
2. What are the common symptoms of the U1469 code in a Dodge?
Symptoms may include erratic transmission behavior, the vehicle being stuck in one gear, a check engine light, or difficulty shifting gears.
3. What causes the U1469 code to appear on a Dodge?
Common causes include a faulty gear position sensor, damaged wiring or connectors in the CAN network, or a malfunctioning transmission control module (TCM).
4. Can the U1469 code cause drivability issues?
Yes, this code can lead to drivability issues such as improper gear shifts, reduced performance, or the vehicle going into limp mode.
5. How is the U1469 code diagnosed on a Dodge?
A technician will use a scan tool to confirm the code, inspect the gear position sensor, check the CAN network wiring and connectors, and test the TCM for proper operation.
6. Can I drive my Dodge with the U1469 code active?
It’s not recommended to drive with this code active, as it can cause unsafe transmission behavior and may damage the transmission if not addressed promptly.
7. How can I fix the U1469 code on my Dodge?
Repairs may include replacing a faulty gear position sensor, repairing or replacing damaged wiring, or reprogramming or replacing the TCM if necessary.
8. Is the U1469 code specific to Dodge vehicles?
While U1469 can appear on other vehicles, the exact definition and troubleshooting steps may be specific to Dodge models.
9. What tools are needed to troubleshoot the U1469 code?
You’ll need an OBDII scanner capable of reading manufacturer-specific codes, a multimeter to test wiring, and possibly specialized tools for TCM or sensor diagnostics.
10. Will clearing the U1469 code solve the problem?
Clearing the code may temporarily remove the check engine light, but the underlying issue must be resolved to prevent the code from returning.
Discuss the causes and fixes for U1469 Dodge OBDII Code
Code U1469 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.