U1467 RAM Code - Implausible Driver Shift Request Signal Received On CAN And DPT CAN
Quick Answer
The U1467 code indicates that an implausible driver shift request signal has been received on the Controller Area Network (CAN) and Diagnostic Powertrain (DPT) CAN. Common causes include Short circuit in the wiring harness, Damaged connectors or wiring, Faulty transmission control module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U1467 RAM indicates Implausible Driver Shift Request Signal Received On CAN And DPT CAN.
- Common causes
- Common causes include Short circuit in the wiring harness, Damaged connectors or wiring, Faulty transmission control module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code U1467 RAM Description
The U1467 code indicates that an implausible driver shift request signal has been received on the Controller Area Network (CAN) and Diagnostic Powertrain (DPT) CAN. In simpler terms, this means that there is a communication error between the vehicle's transmission control module and other modules within the vehicle. This can lead to issues with the transmission's operation, potentially causing erratic shifting behavior, harsh shifting, or even the transmission getting stuck in a particular gear.
Common Causes of U1467 RAM
- Short circuit in the wiring harness
- Damaged connectors or wiring
- Faulty transmission control module
- Issues with the CAN bus communication network
- Water or corrosion damage to electrical components
Symptoms of U1467 RAM
- Erratic shifting behavior
- Harsh shifting between gears
- Transmission getting stuck in a specific gear
- Illumination of the Check Engine Light
- Reduced fuel efficiency
How to Fix U1467 RAM
- Begin by conducting a thorough inspection of the wiring harness, connectors, and transmission control module for any visible damage or signs of corrosion.
- Use a multimeter to test the continuity of the wiring and check for any shorts or open circuits.
- Inspect the CAN bus communication network for any faults or issues that may be causing the communication error.
- If a faulty transmission control module is identified, it will need to be replaced and reprogrammed to ensure proper operation.
- Clear the fault codes from the vehicle's computer system and perform a test drive to verify that the issue has been resolved.
Cost to Fix U1467 RAM
The typical repair costs for addressing the U1467 code can vary depending on the specific cause of the issue. In general, you can expect to pay anywhere from $200 to $800 for parts and labor. Keep in mind that diagnosis time and labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate based on your location, vehicle make and model, and engine type.
Need more information about the U1467 RAM code?
Need more information on how to fix the U1467 RAM code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U1467 RAM code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U1467 RAM Code
1. What are the common symptoms of OBDII code U1467?
- Common symptoms include erratic shifting behavior, transmission slipping, and potential difficulty engaging certain gears.
2. What can cause the OBDII code U1467 to trigger?
- The code may trigger due to wiring issues, faulty sensors, a malfunctioning transmission control module (TCM), or a problem with the CAN communication network.
3. How can I diagnose the OBDII code U1467?
- Diagnosing the code typically involves using a professional OBDII scanner to retrieve the trouble codes and performing a thorough inspection of the transmission system and related components.
4. What repairs are commonly needed for OBDII code U1467?
- Repairing this code may involve fixing wiring faults, replacing damaged sensors, resetting the TCM, or addressing any issues with the CAN communication system.
5. Can I drive my vehicle with the OBDII code U1467 present?
- It is not recommended to drive the vehicle with this code present, as it can lead to potential transmission issues and safety hazards.
6. How much does it cost to repair OBDII code U1467?
- Repair costs can vary depending on the underlying cause of the code, but expenses may include parts replacement, labor costs, and diagnostic fees.
7. Is it possible to reset the OBDII code U1467 without repairs?
- While clearing the code may temporarily resolve the issue, it is crucial to address the root cause to prevent further transmission problems.
8. Can a DIY enthusiast fix OBDII code U1467 at home?
- Depending on the mechanical skill level and access to tools, some DIY enthusiasts may be able to diagnose and repair minor issues related to this code. However, complex repairs may require professional assistance.
9. Will OBDII code U1467 cause permanent damage to the vehicle if left unattended?
- Ignoring this code can potentially lead to further damage to the transmission system and other related components, so it is essential to address it promptly.
10. How long does it take to repair OBDII code U1467?
- The repair time can vary based on the specific cause of the code and the complexity of the necessary repairs, so it is recommended to consult with a professional technician for an accurate estimate.
Discuss the causes and fixes for U1467 RAM OBDII Code
Code U1467 RAM comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.