U1466 Dodge Code - Implausible Driver Shift Request Signal Received On DPT CAN
Quick Answer
The U1466 code for Dodge vehicles indicates that an implausible driver shift request signal has been received on the Diagnostic Path Test Controller Area Network (DPT CAN). Common causes include Faulty shift selector switch, Wiring issues or shorts in the CAN network, Malfunctioning transmission control module (TCM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- U1466 Dodge indicates Implausible Driver Shift Request Signal Received On DPT CAN.
- Common causes
- Common causes include Faulty shift selector switch, Wiring issues or shorts in the CAN network, Malfunctioning transmission control module (TCM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code U1466 Dodge Description
The U1466 code for Dodge vehicles indicates that an implausible driver shift request signal has been received on the Diagnostic Path Test Controller Area Network (DPT CAN). In simpler terms, this means that there is a communication issue between the driver's input for shifting gears and the vehicle's control system. The transmission control module (TCM) is not receiving a valid signal from the driver's shift input, which can lead to erratic shifting behavior or the inability to shift gears properly.
Common Causes of U1466 Dodge
- Faulty shift selector switch
- Wiring issues or shorts in the CAN network
- Malfunctioning transmission control module (TCM)
- Sensor failures related to the transmission
- Software glitches in the control systems
Symptoms of U1466 Dodge
- Erratic shifting behavior
- Delayed or harsh gear shifts
- Inability to shift gears
- Transmission slipping
- Illuminated check engine light
How to Fix U1466 Dodge
- Begin by performing a thorough inspection of the shift selector switch and its wiring to check for any visible damage or loose connections.
- Test the CAN network for any shorts or communication errors by using a diagnostic scan tool to monitor the data flow.
- If no issues are found with the switch or wiring, proceed to test the TCM and related sensors for proper functionality.
- Reset the TCM and perform a relearn procedure to recalibrate the transmission control system.
- Clear the fault codes and test drive the vehicle to ensure that the issue has been resolved.
Cost to Fix U1466 Dodge
The cost of repairing the U1466 code on a Dodge vehicle can vary depending on the specific cause of the issue and the labor rates in your area. On average, you can expect to pay anywhere from $200 to $500 for parts and labor. Keep in mind that diagnostic time and labor rates at auto repair shops may range from $80 to $150 per hour, so it's advisable to obtain a detailed quote from a professional technician before proceeding with the repair.
Need more information about the U1466 Dodge code?
Need more information on how to fix the U1466 Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the U1466 Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about U1466 Dodge Code
1. What does the OBDII code U1466 mean on a Dodge vehicle?
The U1466 code indicates that an implausible driver shift request signal has been received on the Drive Position Transmission (DPT) CAN bus.
2. What are the common symptoms of the U1466 code?
Symptoms may include erratic shifting, the transmission stuck in one gear, the inability to shift gears, or the illumination of the check engine light.
3. What causes the U1466 code to appear?
The code can be caused by a faulty gear shift module, damaged wiring or connectors on the DPT CAN bus, or a software issue in the transmission control module (TCM).
4. Can a weak battery cause the U1466 code?
Yes, low voltage or a weak battery can lead to communication errors on the CAN bus and trigger the U1466 code.
5. How is the U1466 code diagnosed?
A technician will use a scan tool to check for related codes, inspect the wiring and connectors around the shift module, and test the functionality of the CAN bus system.
6. Can I still drive my Dodge with the U1466 code?
Driving with the U1466 code is not recommended, as it may lead to erratic shifting or transmission failure, potentially causing unsafe driving conditions.
7. How do you fix the U1466 code?
Repair may involve replacing a faulty gear shift module, repairing damaged wiring or connectors, or updating the TCM software.
8. Is the U1466 code covered under warranty?
It may be covered under the powertrain or emissions warranty, depending on your vehicle's age and mileage. Check with your dealership for warranty specifics.
9. How much does it cost to fix the U1466 code?
Repair costs can vary widely but may range from $150 to $500, depending on whether the issue is with wiring, a module, or software.
10. Can a DIYer fix the U1466 code?
If you have advanced diagnostic tools and knowledge of CAN bus systems, you may be able to troubleshoot and repair the issue. However, professional assistance is often recommended.
Discuss the causes and fixes for U1466 Dodge OBDII Code
Code U1466 Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.