Engine-Codes.com
Engine-Codes – Generic – U1429

U1429 Code - Received Engine Torque Signal Stuck

Quick Answer

The U1429 diagnostic trouble code (DTC) refers to the "Received Engine Torque Signal Stuck" in the vehicle's electronic control module (ECM). Common causes include Malfunctioning sensor related to engine torque signal, Damaged or corroded wiring harness, Internal ECM fault. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
U1429 indicates Received Engine Torque Signal Stuck.
Common causes
Common causes include Malfunctioning sensor related to engine torque signal, Damaged or corroded wiring harness, Internal ECM fault.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 07, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code U1429 Description

The U1429 diagnostic trouble code (DTC) refers to the "Received Engine Torque Signal Stuck" in the vehicle's electronic control module (ECM). This code indicates that the ECM has detected an issue with the engine torque signal, which is crucial for the vehicle's performance and drivability. The engine torque signal is a key parameter used by the ECM to calculate fuel delivery, ignition timing, and other engine functions. When this signal is stuck or not functioning properly, it can lead to a variety of performance issues and potentially cause long-term damage if left unaddressed.

OBDII Code U1429 - Received Engine Torque Signal Stuck
U1429 Code - Received Engine Torque Signal Stuck

Common Causes of U1429

  1. Malfunctioning sensor related to engine torque signal
  2. Damaged or corroded wiring harness
  3. Internal ECM fault
  4. Software glitch in the ECM
  5. Poor electrical connections

Symptoms of U1429

  1. Loss of power or engine performance
  2. Rough idling or stalling
  3. Poor fuel efficiency
  4. Difficulty starting the engine
  5. Jerking or surging while driving

How to Fix U1429

  1. Begin by conducting a thorough inspection of the engine torque sensor and its wiring harness to check for any visible damage or corrosion.
  2. Use a multimeter to test the sensor's resistance and voltage output to determine if it is functioning within the manufacturer's specifications.
  3. Check the ECM for any fault codes and perform a software update or reprogramming if necessary to address any potential glitches.
  4. Repair or replace any damaged wiring harnesses or connectors that may be causing the issue.
  5. Clear the DTC from the ECM's memory using a diagnostic scan tool and verify that the code does not return during a test drive.

Cost to Fix U1429

The typical repair costs for addressing a U1429 DTC can vary depending on the specific cause of the issue and the required repairs. On average, the parts and labor for resolving this code could range from $200 to $500. It's important to note that diagnosis time and labor rates at auto repair shops can vary based on location, vehicle make and model, and engine type. Rates may range from $80 to $150 per hour, with higher rates in metropolitan areas or at dealerships and lower rates at independent shops. For a more precise estimate, it's recommended to consult with local auto repair shops.

Need more information about the U1429 code?

Need more information on how to fix the U1429 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the U1429 code diagnosed by a professional: Find a repair shop in your area

Code U1429 Information for Specific Makes

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about U1429 Code

1. What are the common symptoms of OBDII code U1429 (Received Engine Torque Signal Stuck)?

- Common symptoms include poor engine performance, reduced power, and the vehicle going into limp mode.

2. What are the possible causes of OBDII code U1429 (Received Engine Torque Signal Stuck)?

- Possible causes can include a faulty engine control module (ECM), wiring issues, or a defective torque sensor.

3. Can a bad throttle position sensor trigger code U1429?

- Yes, a malfunctioning throttle position sensor can sometimes trigger OBDII code U1429 due to its impact on engine torque signal readings.

4. How can I diagnose OBDII code U1429?

- Diagnosis typically involves using a professional OBDII scanner to read the code, followed by a thorough inspection of the engine control system and related components.

5. Is it safe to continue driving with OBDII code U1429 present?

- It is not recommended to continue driving with this code present, as it can lead to further engine damage or safety issues.

6. Can a DIY enthusiast repair OBDII code U1429 at home?

- While some may attempt DIY repairs, resolving this code often requires advanced diagnostic tools and expertise, making professional assistance advisable.

7. How much does it cost to repair OBDII code U1429?

- Repair costs can vary depending on the underlying issue, but they may range from a few hundred to over a thousand dollars, including parts and labor.

8. Are there any preventative maintenance steps to avoid OBDII code U1429?

- Regular maintenance, such as checking and replacing worn sensors or addressing wiring issues promptly, can help prevent the occurrence of this code.

9. Can a loose or corroded electrical connection cause OBDII code U1429?

- Yes, loose or corroded electrical connections can disrupt the engine torque signal, potentially triggering code U1429.

10. Will resetting the OBDII system clear code U1429 permanently?

- Resetting the system may clear the code temporarily, but if the underlying issue persists, the code is likely to reappear. It is important to address the root cause of the problem for a lasting solution.

Discuss the causes and fixes for U1429 OBDII Code

Submit a New Comment

Code U1429 comments

No comments found for this page.